Nissan 17202-5S620 Fuel Tank Assembly

You can Select Your Vehicle to check if 17202-5S620 fits your vehicle.

To remove the fuel tank from a Nissan vehicle, first relieve the fuel pressure, disconnect the cable from the negative terminal of the battery, siphon the fuel from the fuel tank into an approved fuel container, remove the rear seat and the fuel pump/fuel level sending unit access cover, disconnect the electrical connectors for the fuel pump and fuel level sending unit, disconnect the fuel feed and return lines, disconnect the electrical connector from the fuel pump/fuel level sending unit wiring harness, remove the fuel filler tube protector, remove the fuel tank shield, loosen the hose clamps and detach the fuel tank filler hose and vapor hose from the fuel filler neck and the fuel tank, place a floor jack under the tank and position a wood plank between the jack pad and the tank, raise the jack until it's supporting the tank, remove the fuel tank mounting bolts, slowly lower the jack while guiding the fuel tank from under the vehicle, and remove the tank from the vehicle. Clean engine oil can be used as an assembly aid when pushing the fuel filler hose back onto the fuel tank.

Fumes coming from a removed fuel tank can be highly flammable and pose a risk of explosion if exposed to sparks or open flames.