Q: How to remove and reinstall the condenser and receiver-drier assembly in a Nissan Titan?
A: To remove the condenser and receiver-drier assembly, discharge and recycle the refrigerant. Remove the Radiator and disconnect the refrigerant lines from the condenser, discarding the O-ring seals. Cap the fittings to prevent dirt or moisture entry. Disconnect the refrigerant pressure sensor connector. If reinstalling the original, prevent oil spillage. If installing a new one, add 2.5 oz of oil. Install new O-ring seals on the refrigerant line fittings, lubricating them with refrigerant oil.