How to remove and install a rear Sway Bar Kit on 2001 Nissan Quest?

If you intend to have the stabilizer bar removed, then you need to lift the car and place it on jackstands. Then, both left and right sides: undo the two nuts / bolts holding the stabilizer bar to the link arm thus separating the stabilizer link from both the frame and bar. After that remove the bolts for Stabilizer bar bracket on both the sides that will help you disconnect the rear Stabilizer bushing clamps and then remove the Stabilizer bar. If the link arms need replacement, unscrew the bolt holding the link arm on the frame rail bracket and take off the link arm. For maintenance, ensure that there is some which are either hall or distorted like the clamps and bushings then replace the torn nuts. While fitting the link arms fasten them on to the frame rail brackets but do not tighten at this stage. Put a stabilizer bar bushing on the stabilizer bar and then locate the bar over the rear axle, fix the brackets and the bolts but do not over tighten them. After that, the link arm bolts should be put on the stabilizer bar, however without applying more torque, and as the final stage, all the bolts should be torqued.

Genuine 2001 Nissan Quest Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Sway Bar Kits found

View related parts
2001 Nissan Quest Rear Stabilizer
Part Number: 56230-0B001
Product Specifications
- Other Name: Stabilizer-Rear; Stabilizer Bar
- Manufacturer Note: F/TUNED SHOCKS AND SPRINGS
- Position: Rear
- Lookup Code: 56230
- Item Weight: 6.50 Pounds
- Item Dimensions: 39.1 x 10.7 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56230-0B001
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2001 Nissan Quest Submodels:
- GXE, SE, XE | 6 Cyl 3.0L, 6 Cyl 3.3L | VG30E, VG33E
View related parts
2001 Nissan Quest Rear Stabilizer
Part Number: 56230-2Z305
Product Specifications
- Other Name: Stabilizer-Rear; Stabilizer Bar
- Position: Rear
- Lookup Code: 56230
- Item Weight: 10.90 Pounds
- Item Dimensions: 40.4 x 11.0 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56230-2Z305
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2001 Nissan Quest Submodels:
- SE | 6 Cyl 3.3L | VG33E
View related parts
2001 Nissan Quest Bar TORSION STB
Part Number: 54611-7B000
Product Specifications
- Other Name: Stabilizer-Front; Stabilizer Bar
- Replaces: 54611-0B000
- Lookup Code: 54611
- Item Weight: 28.10 Pounds
- Item Dimensions: 51.4 x 13.0 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 54611-7B000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2001 Nissan Quest Submodels:
- GXE, SE | 6 Cyl 3.3L | VG33E
View related parts
2001 Nissan Quest Front Stabilizer
Part Number: 54611-2Z300
Product Specifications
- Other Name: Stabilizer-Front; Stabilizer Bar
- Position: Front
- Lookup Code: 54611
- Item Weight: 30.30 Pounds
- Item Dimensions: 50.4 x 13.3 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 54611-2Z300
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2001 Nissan Quest Submodels:
- SE | 6 Cyl 3.3L | VG33E

2001 Nissan Quest Sway Bar Kit

Committed to delivering top-notch quality at affordable prices, our website is your go-to source for OEM 2001 Nissan Quest Sway Bar Kit worldwide. Each of our genuine 2001 Nissan Quest Sway Bar Kit come with a manufacturer's warranty, so rest assured, quality and cost are covered. With us, you're making a smart choice that stands the test of time.

2001 Nissan Quest Sway Bar Kit Parts Questions & Experts Answers

Q:
How to remove and install a rear Sway Bar Kit on 2001 Nissan Quest?
Posted by Aldonte A.
A:
If you intend to have the stabilizer bar removed, then you need to lift the car and place it on jackstands. Then, both left and right sides: undo the two nuts / bolts holding the stabilizer bar to the link arm thus separating the stabilizer link from both the frame and bar. After that remove the bolts for Stabilizer bar bracket on both the sides that will help you disconnect the rear Stabilizer bushing clamps and then remove the Stabilizer bar. If the link arms need replacement, unscrew the bolt holding the link arm on the frame rail bracket and take off the link arm. For maintenance, ensure that there is some which are either hall or distorted like the clamps and bushings then replace the torn nuts. While fitting the link arms fasten them on to the frame rail brackets but do not tighten at this stage. Put a stabilizer bar bushing on the stabilizer bar and then locate the bar over the rear axle, fix the brackets and the bolts but do not over tighten them. After that, the link arm bolts should be put on the stabilizer bar, however without applying more torque, and as the final stage, all the bolts should be torqued.
Answered by Nissan Parts Specialist Brian / Feb 04, 2025