For 1999 and earlier models, start by disconnecting the cable from the negative battery terminal, then remove the headlight bulb, followed by the radiator grille and the parking light housing. Next, take out the retaining nuts and bolts, detach the housing, and withdraw it from the vehicle, noting that there are four retaining bolts and nuts, with two bolts located on the fender brace and two nuts accessible from behind the radiator brace. For 2000 and later models, begin by removing the bumper fascia, then disconnect the electrical connector from the back of the headlight assembly and unbolt the headlight assembly from the vehicle. Finally, installation is the reverse of the removal process.