How do you remove and install a compressor on Nissan 240sx?

To remove and install the compressor, start by disconnecting the negative battery cables. Next, remove any necessary equipment to access the compressor mounting bolts and, if applicable, the compressor revolution sensor. Take off the compressor drive belt, which may require removing the idler pulley and bracket from the underside of the vehicle. Discharge the air conditioning system and disconnect the refrigerant lines, plugging them with a clean shop towel while using two wrenches for disconnection. Disconnect and tag all electrical connections, then remove the compressor mounting bolts and take out the compressor. For installation, place the compressor on the engine and evenly torque all mounting bolts according to specifications. Reconnect all electrical connections and refrigerant lines, ensuring to replace O-rings. Reinstall any necessary equipment to access the compressor mounting bolts and the compressor revolution sensor if equipped. Adjust and install the drive belt, reconnect the negative battery cable, and evacuate and charge the system as needed, ensuring the oil level is correct for the compressor. Avoid leaving the compressor on its side or upside down for extended periods to prevent oil from entering the low-pressure chambers, and always replace the O-rings.

Genuine Nissan 240SX A/C Compressor

Air Conditioning Compressor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 A/C Compressors found

View related parts
Nissan 240SX Compressor-Cooler
Part Number: 92600-70F11
$556.17 MSRP: $698.20
You Save: $142.03 (21%)
ADD TO CART
Limited Availability
Product Specifications
- Other Name: Compressor Assy-Cooler
- Manufacturer Note: F/AIR CONDITIONER-STD TYPE
- Replaced by: 92600-70F13
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1996-1998 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24DE
View related parts
Nissan 240SX Compressor Cooler
Part Number: 92600-53F70
$595.18 MSRP: $775.98
You Save: $180.80 (24%)
ADD TO CART
Limited Availability
Product Specifications
- Other Name: Compressor Assy-Cooler
- Replaced by: 92600-53F72
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1993-1994 Nissan 240SX | 4 Cyl 2.4L | KA24D
View related parts
Nissan 240SX Compressor Cooler
Part Number: 92600-70F61
$566.16 MSRP: $711.23
You Save: $145.07 (21%)
ADD TO CART
Limited Availability
Product Specifications
- Other Name: Compressor Assy-Cooler
- Manufacturer Note: F/AIR CONDITIONER-STD TYPE
- Replaced by: 92600-70F10
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1997 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24DE
View related parts
Nissan 240SX Compressor
Part Number: 92600-40F06
Product Specifications
- Other Name: Compressor Assy-Cooler
- Manufacturer Note: SAVE R12 F/AIR CONDITIONER-STD TYPE
- Replaced by: 92600-40F09
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1989-1991 Nissan 240SX | 4 Cyl 2.4L | KA24D, KA24E
View related parts
Nissan 240SX Compressor
Part Number: 92600-42L04
Product Specifications
- Other Name: Compressor Assy-Cooler
- Manufacturer Note: F/AIR CONDITIONER-STD TYPE
- Replaced by: 92600-40F09
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1989-1990 Nissan 240SX | 4 Cyl 2.4L | KA24D, KA24E
View related parts
Nissan 240SX Compressor Wo Cl
Part Number: 92610-70F12
Product Specifications
- Other Name: Compressor Unit
- Manufacturer Note: F/AIR CONDITIONER-STD TYPE
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1997-1998 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24DE
View related parts
Nissan 240SX Compressor Wo Cl
Part Number: 92610-70F13
Product Specifications
- Other Name: Compressor Unit
- Manufacturer Note: F/AIR CONDITIONER-STD TYPE
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1997-1998 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24DE
View related parts
Nissan 240SX Compressor Wo Cl
Part Number: 92610-70F14
Product Specifications
- Other Name: Compressor Unit
- Manufacturer Note: F/AIR CONDITIONER-STD TYPE
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1997-1998 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24DE
View related parts
Nissan 240SX A/C Comp W/O Clutch
Part Number: 92610-70F10
Product Specifications
- Other Name: Compressor Unit; Compressor
- Manufacturer Note: F/AIR CONDITIONER-STD TYPE
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1996 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24DE
View related parts
Nissan 240SX Compressor Cooler
Part Number: 92600-70F14
Product Specifications
- Other Name: Compressor Assy-Cooler
- Manufacturer Note: F/AIR CONDITIONER-STD TYPE
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1997-1998 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24DE
View related parts
Nissan 240SX Compressor Cooler
Part Number: 92600-70F10
Product Specifications
- Other Name: Compressor Assy-Cooler; Compressor, Compressor Assembly
- Manufacturer Note: F/AIR CONDITIONER-STD TYPE
- Replaces: 92600-70F61, 92600-70F60
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1997 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24DE
View related parts
Nissan 240SX Compressor Cooler
Part Number: 92600-70F60
Product Specifications
- Other Name: Compressor Assy-Cooler
- Manufacturer Note: F/AIR CONDITIONER-STD TYPE
- Replaced by: 92600-70F10
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1996 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24DE
View related parts
Nissan 240SX Compressor
Part Number: 92600-40F05
Product Specifications
- Other Name: Compressor Assy-Cooler
- Manufacturer Note: SAVE R12 F/AIR CONDITIONER-STD TYPE
- Replaced by: 92600-40F09
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1989-1991 Nissan 240SX | 4 Cyl 2.4L | KA24D, KA24E
View related parts
Nissan 240SX Compressor Cooler
Part Number: 92600-53F00
Product Specifications
- Other Name: Compressor Assy-Cooler
- Replaced by: 92600-53F25
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1990-1991 Nissan 240SX | 4 Cyl 2.4L | KA24D, KA24E
View related parts
Nissan 240SX Compressor Cooler
Part Number: 92600-53F01
Product Specifications
- Other Name: Compressor Assy-Cooler
- Replaced by: 92600-53F25
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1990-1993 Nissan 240SX | 4 Cyl 2.4L | KA24D
View related parts
Nissan 240SX Compressor Cooler
Part Number: 92600-53F02
Product Specifications
- Other Name: Compressor Assy-Cooler
- Replaced by: 92600-53F25
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1992-1994 Nissan 240SX | 4 Cyl 2.4L | KA24D

Nissan 240SX A/C Compressor

If you need any OEM Nissan 240SX A/C Compressor, feel free to choose them out of our huge selection of genuine Nissan 240SX A/C Compressor. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan 240SX A/C Compressor Parts Questions & Experts Answers

Compressor
92600-42L04
Q: How do you remove and install a compressor on Nissan 240sx?
A:
To remove and install the compressor, start by disconnecting the negative battery cables. Next, remove any necessary equipment to access the compressor mounting bolts and, if applicable, the compressor revolution sensor. Take off the compressor drive belt, which may require removing the idler pulley and bracket from the underside of the vehicle. Discharge the air conditioning system and disconnect the refrigerant lines, plugging them with a clean shop towel while using two wrenches for disconnection. Disconnect and tag all electrical connections, then remove the compressor mounting bolts and take out the compressor. For installation, place the compressor on the engine and evenly torque all mounting bolts according to specifications. Reconnect all electrical connections and refrigerant lines, ensuring to replace O-rings. Reinstall any necessary equipment to access the compressor mounting bolts and the compressor revolution sensor if equipped. Adjust and install the drive belt, reconnect the negative battery cable, and evacuate and charge the system as needed, ensuring the oil level is correct for the compressor. Avoid leaving the compressor on its side or upside down for extended periods to prevent oil from entering the low-pressure chambers, and always replace the O-rings.