×
- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Nissan Parts
- Nissan Accessories
My Garage
My Account
Cart
Genuine Nissan 240SX Door Lock
Power Door Lock Actuator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
29 Door Locks found
Nissan 240SX Trunk Lid Lock Assembly
Part Number: 84630-01E10$35.18 MSRP: $52.91You Save: $17.73 (34%)
Nissan 240SX Trunk Lid Lock Assembly
Part Number: 84630-65F00$64.57 MSRP: $99.49You Save: $34.92 (36%)Nissan 240SX Trunk Lid Lock Assembly
Part Number: 84630-35F00$35.18 MSRP: $52.91You Save: $17.73 (34%)
| Page 1 of 2 |Next >
1-20 of 29 Results
Nissan 240SX Door Lock
The Nissan 240SX Door Lock is responsible for locking the door to the body of the vehicle by preventing the exterior handle from releasing the latch when it's locked. A latch fitted at the door edge clamps onto a striker. In other words, a Door Lock equipped with a key cylinder or interior knob moves rods that lock this clasp or release it to open. When the key is turned to the lock position or the knob is pressed, the exterior handle cannot move the clasp, keeping the cabin in the locked position. Some Nissan 240SX vehicles may offer a power Door Lock, where an electric actuator on the latch activates due to a switch or control module. It allows all doors to lock or unlock at once using a master switch. A remote keyless Door Lock allows the use of a key fob to unlock and lock the vehicle. A coded radio signal is sent from the fob to a receiver; one button locks and another unlocks. It usually opens only the driver door first. This design aids in the swift securing of a Nissan 240SX occupant. Certain Nissan 240SX setups enable the automatic engagement of the Door Lock when drive is selected or at a specific speed point.
If you need any OEM Nissan 240SX Door Lock, feel free to choose them out of our huge selection of genuine Nissan 240SX Door Lock. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.
Nissan 240SX Door Lock Parts Questions & Experts Answers
- Q: How to remove and install the Door Lock on Nissan 240sx?A:To dismantle the components to facilitate installation, the first thing is to undo the door panel together with the sealing screen. Subsequently, remove the lock cylinder from the rod turning the resin clip on it clockwise as described above. To do this, turn.unlock the nuts that fastens the outside door handle and scribble off it. After that, unlock the inside door handle and door lock by unscrewing the screws as you pull out the door lock assembly from the inside of the door. Removal of lock cylinder is another aspect that can be carried out by removing the retainer clip. As for the installation, it is necessary to put back the lock cylinder and the clip into the door, after that install the door lock assembly and the handles. Last of all, install the door panel and also all the hardware that was removed before.
