×
- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Nissan Parts
- Nissan Accessories
My Garage
My Account
Cart
Genuine Nissan 240SX Intake Manifold
Engine Intake Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
12 Intake Manifolds found
Nissan 240SX Intake Manifold Assembly
Part Number: 14001-70F00$244.70 MSRP: $339.95You Save: $95.25 (29%)
Nissan 240SX Intake Manifold
The Intake Manifold is a component that directs air or air-fuel mixture to the cylinder. Each cylinder receives air so that combustion takes place evenly and effectively. The Nissan 240SX Intake Manifold is a quality part for a 240SX vehicle. Fitted after the throttle body, this Intake Manifold uses runners that divide the flow to maintain a uniform distribution as uneven flow can hinder smooth operation. In the engines where fuel is introduced close to the ports, many of the Intake Manifold carries air, while carbureted or throttle-body layouts mix the fuel earlier in the same passages. According to Nissan specifications, inside the 240SX engine bay, the manifold is located between the cylinder head and the throttle body. Furthermore, the gasket surfaces on the Intake Manifold must be free of debris to avoid leaks. Certain manifolds feature coolant passages for holding the thermostat and sensor mounts that provide coolant or air temperature readings for control. A number of designs have been created that have their upper and lower halves sealed by gaskets so that these airtight joints won't let the engine run on a lean mixture or cause a rough idle. In modern composite constructions, lighter materials are applied to keep the charge cooler. The Nissan tradition has helped keep the 240SX responsive with the use of an Intake Manifold that Nissan drivers appreciate.
If you need any OEM Nissan 240SX Intake Manifold, feel free to choose them out of our huge selection of genuine Nissan 240SX Intake Manifold. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.
Nissan 240SX Intake Manifold Parts Questions & Experts Answers
- Q: How to remove and install the intake manifold on Nissan 240sx?A:Start by removing and installing the intake manifold on different Nissan models, which may include draining the coolant and disconnecting the battery cable. From the manifold, remove the air cleaner hoses as well as radiator hoses. For fuel-injected engines, disconnect throttle cable and fuel pipe; insert a plug into the fuel pipe to prevent fuel spillage. Mark and unplug all other wires, tubes and E.G.R. and P.C.V. lines from behind intake manifold while taking out manifold supports too. Intake manifold bolts should be unbolted together with injectors, E.G.R. valve, and fuel assembly. Put new intake manifold gasket in place after cleaning gasket mounting surfaces properly. Intake manifold bolts must be tightened evenly in 2-3 steps Connect all electrical connections, tubes and E.G.R. and P.C.V lines at the back of the intake manifold; besides, place manifolds supports also on it.Refitting the throttle cable plus fuel pipe follows along with putting back radiator hoses and air cleaner hoses.Fill coolant then connect battery cable starting an engine to check for leaks.
