Genuine Nissan Altima Axle Shaft Retainer

Axle Shaft C-Clip

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Model

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Axle Shaft Retainers found

View related parts
Nissan Altima Retainer-Bearing,Front Drive Shaft
Part Number: 39776-JD000
$32.16 MSRP: $40.68
You Save: $8.52 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2019-2025 Nissan Altima | Platinum, S, SL, SR, SV | 4 Cyl 2.5 L GAS, 4 Cyl 2.5L | PR25DD
- 2007-2015 Nissan Altima | 25SL/Moon Roof, Base, S, SL, SV, Tech | 4 Cyl 2.5L | QR25DE
View related parts
Nissan Altima Retainer-Bearing,Front Drive Shaft
Part Number: 39776-3JA0A
$75.78 MSRP: $102.22
You Save: $26.44 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2024 Nissan Altima | Edition ONE, Platinum, S, SL, SR, SV, Tech | 4 Cyl 2.0 L GAS, 4 Cyl 2.0L, 6 Cyl 3.5L | KR20DDET, VQ35DE
View related parts
Nissan Altima RETAINER Bearing Front Door Shaft
Part Number: 39776-JY02B
Product Specifications
- Other Name: Retainer-Bearing,Front Drive Shaft
- Position: Front
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2007-2013 Nissan Altima | SE, SL, SR | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Altima RETAINER Bearing
Part Number: 39776-JA11A
Product Specifications
- Other Name: Retainer-Bearing,Front Drive Shaft
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2007-2011 Nissan Altima | Hybrid, SE, SL, SR | 4 Cyl 2.5L, 6 Cyl 3.5L | QR25DE, VQ35DE
View related parts
Nissan Altima Retainer-Bearing,Front Drive Shaft
Part Number: 39776-10E04
Product Specifications
- Other Name: Bearing Retainer
- Position: Front
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1998-2001 Nissan Altima | GLE, GXE, SE, XE | 4 Cyl 2.4L | KA24DE
View related parts
Nissan Altima RETAINER Bearing Front Door Shaft
Part Number: 39776-10E03
Product Specifications
- Other Name: Retainer-Bearing,Front Drive Shaft; Bearing Retainer, Bearing Support Retainer
- Position: Front
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1993-1997 Nissan Altima | GLE, GXE, SE, XE | 4 Cyl 2.4L | KA24DE

Nissan Altima Axle Shaft Retainer

The Nissan Altima Axle Shaft Retainer locks each drive shaft to the differential to deliver advanced wheel alignment. This allows for smoother turns and confident power delivery. This Axle Shaft Retainer was manufactured to the same specifications as those created by Nissan. It resists sliding that can cause vibration, leakage of fluid, or imbalance of the brake. It fits first through sixth generation Altima sedans and coupes because the Axle Shaft Retainer bolts to the same mounting points for all these model years, whether you drive a daily commuter car or an exuberant SE. Two reliable styles are offered, a lightweight C-clip choice for quick assembly and a bolt on flange version for extra rigidity. Each Axle Shaft Retainer shields gear oil while keeping bearing loads in check so that mileage stays high and noise stays low. By stopping halfshaft drift, the part allows the transaxle and CV joints to operate at their effective angles, limiting parasitic loss and improving throttle response for every Nissan driver. The retainer is made of treated steel which is not prone to corrosion. Its precise internal splines grip the shaft without marking it, very much Nissan-like, and give longer service intervals with less hassle on the roadside. This Axle Shaft Retainer has been tested by Nissan for decades under extreme environmental conditions and can withstand heat cycles and salt spray without losing its clamping force. The Axle Shaft Retainer is applied on the S, SR, SL, and sporty SE trims of the Altima. Thus, almost all current Altima on the road can benefit from the exact same reliable design. The drivers of the classic 1990s Altima model, the refined 2000s Altima, and today's tech focused Altima can trust this part. Get this genuine Nissan replacement Axle Shaft Retainer that will enhance the integrity of your drivetrain, improve bearing life, improve efficiency, and make the daily ride drama-free.

If you need any OEM Nissan Altima Axle Shaft Retainer, feel free to choose them out of our huge selection of genuine Nissan Altima Axle Shaft Retainer. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.