How to remove and install the door handle, door latch assembly, and door lock cylinder on a Nissan Frontier?

Take out the door trim panel and the plastic water-shield. Remove the latch retaining screws from the end of the door, then reach inside the door to release the latch from the control rods. Certain models have a stiffening brace that must be removed to gain access to the rear of the latch. For any vehicle with power door locks, unplug its electrical connector. Unhook the door latch, and if it exists, unfasten the door lock solenoid. Installation will be done in reverse from removal. If present, separate electrical contact from locking cylinder. A screwdriver or pliers can be used to take off this part's locking cylinder retaining clip. Move lock outward so that it separates itself from door and lock cylinder control rod. In some cases, one has to disentangle a clip which attaches control rod and lock cylinder together. Take off control link rod connected to outer handle then remove outer handle retaining nuts and pull handle away from door. For front doors, holes in door frame provide access for removing outside handle retaining nuts. On vehicles with rear doors, pry out trim caps so as to get at exterior handle retention nuts.Installation is accomplished by reversing above removal procedures.Pull off the plate concealing control rod guide.Release retaining screws, pulling handle free of hinge then unfastening control rods from behind inside handles.Pull back on screw retainer cover.If available at all,the inside handle retaining screw should be detached such that it slides back into place away from its attachment point on a nearby wall.Installation is carried out in reverse order as compared to removal process.

Genuine Nissan Frontier Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

226 Door Handles found

View related parts
Nissan Frontier Rear Gate Handle
Part Number: 90606-8Z400
$64.35 MSRP: $99.15
You Save: $34.80 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle - Rear Gate; Handle
- Position: Rear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2001-2004 Nissan Frontier | SC, SE, XE | 4 Cyl 2.4L, 6 Cyl 3.3L | KA24DE, VG33E
View related parts
Nissan Frontier Handle Outside
Part Number: 80607-3S500
$29.29 MSRP: $44.05
You Save: $14.76 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Front Door Left Hand; Handle, Outside
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1998-2004 Nissan Frontier | SC, SE, STD, XE | 4 Cyl 2.4L, 6 Cyl 3.3L | KA24DE, VG33E
View related parts
Nissan Frontier Handle Outside
Part Number: 80606-3S500
$29.29 MSRP: $44.05
You Save: $14.76 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly Front Door Outside, Right Hand; Handle, Outside
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1998-2004 Nissan Frontier | SC, SE, STD, XE | 4 Cyl 2.4L, 6 Cyl 3.3L | KA24DE, VG33E
View related parts
Nissan Frontier Rear Gate Handle
Part Number: 90606-01G01
$48.34 MSRP: $72.69
You Save: $24.35 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly - Back Door
- Replaced by: 90606-8Z360
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1998-2000 Nissan Frontier | SE, STD, XE | 4 Cyl 2.4L, 6 Cyl 3.3L | KA24DE, VG33E
View related parts
Nissan Frontier Handle Outside
Part Number: 806B1-9CA0C
$66.38 MSRP: $104.87
You Save: $38.49 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly - Front Door Outside, Left Hand; Handle, Outside
- Position: Front Driver Side
- Replaces: 80607-EA050, 806B1-ZS50A, 80607-EA060, 806B1-ZP00A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2022-2024 Nissan Frontier | Desert Runner, LE, Nismo Off-Road, S, SE, SV, XE | 4 Cyl 2.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
- 2005-2019 Nissan Frontier | LE, Off-Road, PRO-4X, S, SE, SV, XE | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Rear Gate Finisher Assembly
Part Number: 90606-9BF2A
$256.06 MSRP: $413.62
You Save: $157.56 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Finisher Assembly - Rear Gate; Handle
- Position: Rear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2012-2021 Nissan Frontier | Desert Runner, PRO-4X, S, SL, SV | 4 Cyl 2.5 L GAS, 4 Cyl 2.5L, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Front Door Outside Passenger Side Handle Assembly
Part Number: 806B0-ZP61E
$53.46 MSRP: $80.40
You Save: $26.94 (34%)
ADD TO CART
Product Specifications
- Other Name: Handle Assembly - Front Door Outside, Right Hand; Outside Handle
- Manufacturer Note: W/OUT CYL
- Position: Passenger Side
- Replaced by: 82604-9BW6A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2007-2018 Nissan Frontier | LE, Off-Road, PRO-4X, S, SL | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Frontier Handle Outside
Part Number: 80606-EA555
$45.82 MSRP: $69.53
You Save: $23.71 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly - Front Door Outside; Handle, Outside
- Position: Passenger Side
- Replaces: 80606-EA565
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2008 Nissan Frontier | LE, SE | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Frontier Rear Gate Handle
Part Number: 90606-9BU2A
$127.09 MSRP: $195.82
You Save: $68.73 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle - Rear Gate; Handle
- Position: Rear
- Replaces: 90606-9BU0A, 90606-9BU1A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2022-2025 Nissan Frontier | Hardbody Edition, PRO-4X, PRO-X, S, SL, SV | 6 Cyl 3.8 L GAS
View related parts
Nissan Frontier Handle
Part Number: 806B0-ZS51A
$18.54 MSRP: $29.29
You Save: $10.75 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly - Front Door Outside, Right Hand; Handle, Outside
- Position: Front Passenger Side
- Replaces: 80606-EA060, 806B0-ZP01A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2025 Nissan Frontier | Desert Runner, LE, Nismo Off-Road, Off-Road, PRO-4X, S, SE, SL, SV, XE | 4 Cyl 2.5 L GAS, 4 Cyl 2.5L, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Handle Outside
Part Number: 806B1-9BA0C
$75.94 MSRP: $117.02
You Save: $41.08 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly - Front Door Outside, Driver Side; Handle, Outside
- Manufacturer Note: BLACK W/ CYL
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2010-2021 Nissan Frontier | Desert Runner, PRO-4X, S, SE, SV, XE | 4 Cyl 2.5 L GAS, 4 Cyl 2.5L, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Handle Outside
Part Number: 806B0-ZS06A
$63.87 MSRP: $98.42
You Save: $34.55 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly - Front Door Outside, Passenger Side; Handle, Outside
- Position: Passenger Side
- Replaces: 806B0-ZP06A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2021 Nissan Frontier | Desert Runner, LE, PRO-4X, S, SE, SV, XE | 4 Cyl 2.5 L GAS, 4 Cyl 2.5L, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Handle Inside
Part Number: 80670-9BT0A
$23.93 MSRP: $37.80
You Save: $13.87 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly Door Inside, Right Hand; Handle, Inside
- Position: Passenger Side
- Replaces: 80670-EA500, 80670-9BK0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2020-2021 Nissan Frontier | Desert Runner, LE, Nismo Off-Road, PRO-4X, S, SE, SL, SV, XE | 4 Cyl 2.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Nissan Frontier Handle Outside
Part Number: 806B0-9BM0B
$62.63 MSRP: $96.51
You Save: $33.88 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly - Front Door Outside, Right Hand; Handle, Outside
- Manufacturer Note: LH
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2022-2025 Nissan Frontier | Desert Runner, Hardbody Edition, PRO-4X, PRO-X, S, SL, SV | 4 Cyl 2.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
- 2015-2019 Nissan Frontier | PRO-4X | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Frontier Handle Outside
Part Number: 806B1-9CA1C
$69.94 MSRP: $107.76
You Save: $37.82 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly - Front Door Outside, Driver Side; Handle, Outside
- Manufacturer Note: CHROME
- Position: Driver Side
- Replaces: 806B1-ZP00B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2019 Nissan Frontier | LE, Off-Road, SL, SV | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Frontier Handle Outside
Part Number: 806B1-ZL00A
$68.31 MSRP: $102.64
You Save: $34.33 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly - Front Door Outside, Driver Side; Handle, Outside
- Manufacturer Note: W/OUT CYL
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2018 Nissan Frontier | Off-Road, PRO-4X | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Frontier Handle Inside
Part Number: 80671-EZ40A
$25.17 MSRP: $37.85
You Save: $12.68 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle - Door Inside Left; Handle, Inside
- Manufacturer Note: BLACK
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2022-2025 Nissan Frontier | Hardbody Edition, PRO-4X, PRO-X, S, SL, SV | 6 Cyl 3.8 L GAS
View related parts
Nissan Frontier Outside Handle Grip
Part Number: 80640-ZS05A
$72.15 MSRP: $111.16
You Save: $39.01 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Grip-Outside Handle; Grip, Handle
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2008-2021 Nissan Frontier | Desert Runner, PRO-4X, S, SE, SV, XE | 4 Cyl 2.5 L GAS, 4 Cyl 2.5L, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Handle
Part Number: 806B0-ZP01B
$53.67 MSRP: $82.69
You Save: $29.02 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly - Front Door Outside, Right Hand; Handle, Outside
- Manufacturer Note: CHROME
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2019 Nissan Frontier | LE, Off-Road, SL, SV | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Frontier Handle-Dr Ins L
Part Number: 80671-9BT0A
$25.61 MSRP: $38.51
You Save: $12.90 (34%)
Product Specifications
- Other Name: Handle, Inside
- Position: Driver Side
- Replaces: 80671-9BK0A, 80671-EA500
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2020-2021 Nissan Frontier | Desert Runner, LE, Nismo Off-Road, PRO-4X, S, SE, SL, SV, XE | 4 Cyl 2.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS

| Page 1 of 12 |Next >

1-20 of 226 Results

Nissan Frontier Door Handle

The pull point of the Nissan Frontier Door Handle releases the latch, allowing the door to open. The Nissan Frontier Door Handle will have a plastic or metal body fixed onto the exterior. It will link to a metal rod that runs to the door latch. When a person pulls on it, the rod moves and disengages the latch so the panel can swing free. Interior Door Handles in the Nissan Frontier perform the same function as outside ones, but they connect to the same latch mechanism from the cabin for an easy exit. The use of both styles of the Door Handle is the same, but their placement varies. The exterior unit is mounted outside the sheet metal, and the interior unit is mounted on the trim surface. Door Handle is applied frequently every time you enter and exit the vehicle. Such repeated stress can weaken the mechanism over time. Replacing a worn Door Handle on a Nissan Frontier restores smooth entry and preserves day-to-day convenience.

If you need any OEM Nissan Frontier Door Handle, feel free to choose them out of our huge selection of genuine Nissan Frontier Door Handle. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Frontier Door Handle Parts Questions & Experts Answers

Rear Gate Handle
90606-8Z400
Q:
How to remove and install the door handle, door latch assembly, and door lock cylinder on a Nissan Frontier?
Posted by Jonny N.
A:
Take out the door trim panel and the plastic water-shield. Remove the latch retaining screws from the end of the door, then reach inside the door to release the latch from the control rods. Certain models have a stiffening brace that must be removed to gain access to the rear of the latch. For any vehicle with power door locks, unplug its electrical connector. Unhook the door latch, and if it exists, unfasten the door lock solenoid. Installation will be done in reverse from removal. If present, separate electrical contact from locking cylinder. A screwdriver or pliers can be used to take off this part's locking cylinder retaining clip. Move lock outward so that it separates itself from door and lock cylinder control rod. In some cases, one has to disentangle a clip which attaches control rod and lock cylinder together. Take off control link rod connected to outer handle then remove outer handle retaining nuts and pull handle away from door. For front doors, holes in door frame provide access for removing outside handle retaining nuts. On vehicles with rear doors, pry out trim caps so as to get at exterior handle retention nuts.Installation is accomplished by reversing above removal procedures.Pull off the plate concealing control rod guide.Release retaining screws, pulling handle free of hinge then unfastening control rods from behind inside handles.Pull back on screw retainer cover.If available at all,the inside handle retaining screw should be detached such that it slides back into place away from its attachment point on a nearby wall.Installation is carried out in reverse order as compared to removal process.
Answered by Nissan Parts Specialist Glenn / Oct 23, 2023