How to Remove and Reinstall the Radiator Fan and Clutch Assembly on Nissan Frontier?

Disconnect the cable from the negative terminal of the battery and rock the fan back and forth by hand to check for excessive bearing play. With the engine cold (and not running), turn the fan blades by hand. Visually inspect for substantial fluid leakage from the clutch assembly. With the engine completely warmed up, turn off the ignition switch and disconnect the negative battery cable from the battery. Turn the fan by hand. Loosen the fan/water pump pulley nuts several turns. Remove any drivebelts which would interfere with the removal of the radiator fan drivebelt, then remove the radiator fan drivebelt. Detach the lower half of the fan shroud. Remove the fan/water pump pulley nuts and pull the fan/clutch assembly out from the bottom. Carefully inspect the fan blades for damage and defects. At this point, the fan may be unbolted from the clutch, if necessary. Be sure to re-install the fan blade with the "F" mark facing the front of the engine. Installation is the reverse of removal. Be sure to tighten the fan and clutch mounting nuts evenly and securely.

Genuine Nissan Frontier Radiator fan

Radiator Cooling Fan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Radiator fans found

View related parts
Nissan Frontier Fan And Motor Assembly CONDENSOR
Part Number: 92120-ZL00A
$98.70 MSRP: $141.37
You Save: $42.67 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan & Motor Assy-Condenser; Cooling Fan, Fan & Motor, Fan Assembly, Fan Motor
- Replaces: 92120-ZP50A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2019 Nissan Frontier | LE, Off-Road, PRO-4X, S, SE, SL, SV, XE | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Condenser Fan & Motor Assembly
Part Number: 92120-EA200
$108.05 MSRP: $156.48
You Save: $48.43 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan & Motor Assy-Condenser; Cooling Fan, Fan & Motor, Fan Assembly, Fan Motor
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2007 Nissan Frontier | LE, Off-Road, SE | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Frontier Cooling Fan
Part Number: 21060-EA200
$122.98 MSRP: $165.43
You Save: $42.45 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan-Cooling; Fan Blade
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2019 Nissan Frontier | LE, Off-Road, PRO-4X, S, SE, SL, SV | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Frontier Cooling Fan
Part Number: 21060-EA000
$102.97 MSRP: $145.43
You Save: $42.46 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan-Cooling; Fan Blade
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2019 Nissan Frontier | S, SE, SV, XE | 4 Cyl 2.5L | QR25DE
View related parts
Nissan Frontier Cooling Fan
Part Number: 21060-86G00
$104.17 MSRP: $140.12
You Save: $35.95 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan-Cooling
- Replaced by: 21060-86G0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1998-2004 Nissan Frontier | SE, STD, XE | 4 Cyl 2.4L | KA24DE
View related parts
Nissan Frontier Motor & Fan Assembly With Shroud
Part Number: 21481-9BY0A
$352.68 MSRP: $538.28
You Save: $185.60 (35%)
ADD TO CART
Product Specifications
- Other Name: MOTOR & FAN ASSY-W/SHROUD; Fan Assembly, Fan Module
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2020-2024 Nissan Frontier | Hardbody Edition, PRO-4X, PRO-X, S, SL, SV | 6 Cyl 3.8 L GAS
View related parts
Nissan Frontier Fan & Shroud Motor Assembly
Part Number: 21481-9BY0B
$366.92 MSRP: $560.02
You Save: $193.10 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: MOTOR ASSY-FAN & SHROUD; Fan Assembly
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2025 Nissan Frontier | PRO-4X, PRO-X, S, SL, SV | 6 Cyl 3.8 L GAS
View related parts
Nissan Frontier Cooling Fan
Part Number: 21060-4S100
Product Specifications
- Other Name: Fan-Cooling; Fan Blade
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1998-2004 Nissan Frontier | SC, SE, XE | 6 Cyl 3.3L | VG33E
View related parts
Nissan Frontier Condenser Fan & Motor Assembly
Part Number: 92120-4S100
Product Specifications
- Other Name: Fan & Motor Assy-Condenser; Fan & Motor, Fan Assembly
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1998-2001 Nissan Frontier | SE, XE | 6 Cyl 3.3L | VG33E
View related parts
Nissan Frontier Condenser Fan & Motor Assembly
Part Number: 92120-9Z400
Product Specifications
- Other Name: Fan & Motor Assy-Condenser; Fan & Motor, Fan Assembly
- Manufacturer Note: GRAY CONNECTOR
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2004 Nissan Frontier | SC, SE, XE | 4 Cyl 2.4L, 6 Cyl 3.3L | KA24DE, VG33E

Nissan Frontier Radiator fan

The Nissan Frontier Radiator fan helps maintain engine temperatures by pulling fresh air through the front mounted radiator when airflow fails to do so at low speeds. Located directly behind the grille, the Radiator fan is part of a cooling fan assembly that includes a blade, motor, and shroud. Positioned close to the radiator, it pushes air across the hot coolant filled tubes and fins. Earlier pickups were equipped with a belt driven mechanical Radiator fan that was directly connected to engine speed. However, later models of the Nissan Frontier are equipped with an electric Radiator fan that spins on demand, hence always delivering steady airflow whether the truck is idling at a light or cruising through traffic. Nissan drivers seeking more constant temperature control enjoy the benefits of less noise, faster response, and no excessive power draw from the engine belts due to the switch to all-electric units. Whether you have a standard or custom one of a kind Frontier Radiator fan, they all have one thing in common. They'll all move enough air to help keep coolant temperatures down. This is essential to avoid the risk of overheating and harm engine performance and longevity.

If you need any OEM Nissan Frontier Radiator fan, feel free to choose them out of our huge selection of genuine Nissan Frontier Radiator fan. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Frontier Radiator fan Parts Questions & Experts Answers

Cooling Fan
21060-86G00
Q: How to Remove and Reinstall the Radiator Fan and Clutch Assembly on Nissan Frontier?
A:
Disconnect the cable from the negative terminal of the battery and rock the fan back and forth by hand to check for excessive bearing play. With the engine cold (and not running), turn the fan blades by hand. Visually inspect for substantial fluid leakage from the clutch assembly. With the engine completely warmed up, turn off the ignition switch and disconnect the negative battery cable from the battery. Turn the fan by hand. Loosen the fan/water pump pulley nuts several turns. Remove any drivebelts which would interfere with the removal of the radiator fan drivebelt, then remove the radiator fan drivebelt. Detach the lower half of the fan shroud. Remove the fan/water pump pulley nuts and pull the fan/clutch assembly out from the bottom. Carefully inspect the fan blades for damage and defects. At this point, the fan may be unbolted from the clutch, if necessary. Be sure to re-install the fan blade with the "F" mark facing the front of the engine. Installation is the reverse of removal. Be sure to tighten the fan and clutch mounting nuts evenly and securely.