How do you remove and install the inside door handle, key lock cylinder, outside door handle, and door latch on Nissan Murano?

To remove the inside door handle, first take off the door trim panel, disconnect the actuator cable from the handle, and unscrew the handle from the backside of the door trim panel. Installation is the reverse of removal. For the key lock cylinder and outside door handle, begin by removing the door trim panel, then take out the door window glass and the door module assembly. Remove the rubber plug from the rear edge of the door to access the Torx bolt securing the key lock cylinder, and loosen the bolt without removing it completely. Disconnect the actuator rod connecting the key lock cylinder to the door latch assembly by popping off the clip and pushing the rod out. If removing the outside door handle, disconnect the upper end of the rod; if removing the latch assembly, disconnect the lower end. Pull the outside door handle to remove the lock cylinder assembly or the outside handle trim cap. To remove the outside handle, pull it out and slide it to the rear, then slide the mounting bracket toward the rear of the vehicle and pull it out of the door, disconnecting the actuator cable. Installation is the reverse of removal. For the door latch, remove the door trim panel, the door window glass, and the door module assembly. Detach the latch from the door by removing the Torx bolts from the rear edge and pulling the latch assembly out. Disconnect the electrical connector and the actuator cable from the door latch before removing the latch assembly. Installation is the reverse of removal.

Genuine Nissan Murano Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

50 Door Handles found

View related parts
Nissan Murano Door Inside Handle Assembly, Left
Part Number: 80671-3TA0D
$23.02 MSRP: $34.62
You Save: $11.60 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assy-Door Inside,Lh; Inside Handle
- Position: Driver side
- Replaces: 80671-3TA0E, 80671-3TA0A, 80671-3TA0B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2015-2024 Nissan Murano | Midnight Edition, Platinum, S, SL, SV | 4 Cyl 2.5L, 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | QR25DER, VQ35DE
View related parts
Nissan Murano Outside Door Handle Grip
Part Number: 80640-CA012
$101.50 MSRP: $156.40
You Save: $54.90 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Grip-Outside Handle; Outside Handle
- Replaces: 80640-CA011, 80640-CA000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2007 Nissan Murano | S, SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Door Inside Handle Assembly, Left
Part Number: 80670-3TA0D
$23.06 MSRP: $34.67
You Save: $11.61 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assy-Door Inside,Rh; Inside Handle
- Position: Passenger Side
- Replaces: 80670-3TA0A, 80670-3TA0E, 80670-3TA0B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2015-2024 Nissan Murano | Midnight Edition, Platinum, S, SL, SV | 4 Cyl 2.5L, 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | QR25DER, VQ35DE
View related parts
Nissan Murano Door Inside Handle Assembly, Left
Part Number: 80671-3TA0B
$23.02 MSRP: $34.62
You Save: $11.60 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Handle Door Lh Re ; Handle Assy-Door Inside,Lh
- Position: Driver side
- Replaced by: 80671-3TA0D
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2017 Nissan Murano | Platinum, SL, SV | 4 Cyl 2.5L | QR25DER
View related parts
Nissan Murano Back Door Pull Handle
Part Number: 90940-1LA0B
$35.21 MSRP: $52.95
You Save: $17.74 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Handle-Pull,Back Door; Pull Handle, Pull Pocket
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2015-2019 Nissan Murano | Platinum, S, SL, SV | 4 Cyl 2.5L, 6 Cyl 3.5L | QR25DER, VQ35DE
View related parts
Nissan Murano Outside Handle Grip
Part Number: 80640-4BA0D
$32.59 MSRP: $49.02
You Save: $16.43 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Grip-Outside Handle; Outside Handle
- Replaces: 80640-5HA0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2015-2024 Nissan Murano | Midnight Edition, Platinum, S, SL, SV | 4 Cyl 2.5L, 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | QR25DER, VQ35DE
View related parts
Nissan Murano Right Handle, Outside
Part Number: 80640-1AA0A
$147.89 MSRP: $227.87
You Save: $79.98 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Grip-Outside Handle; Outside Handle
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2008-2014 Nissan Murano | LE, LE/ROOF, S, SL, SL/ROOF, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Outside Handle Grip
Part Number: 80640-CB01A
$114.34 MSRP: $176.18
You Save: $61.84 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Grip-Outside Handle; Outside Handle
- Replaces: 80640-CB012
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2007 Nissan Murano | SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Back Door Pull Handle
Part Number: 90940-9PR0A
$22.40 MSRP: $33.69
You Save: $11.29 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle-Pull, Back Door; Pull Handle
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2020-2024 Nissan Murano | Midnight Edition, Platinum, S, SL, SV | 6 Cyl 3.5 L GAS
View related parts
Nissan Murano Door Inside Handle Assembly, Right
Part Number: 80670-3TA0B
$23.06 MSRP: $34.67
You Save: $11.61 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assy-Door Inside,Rh
- Position: Passenger Side
- Replaced by: 80670-3TA0D
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2017 Nissan Murano | Platinum, SL, SV | 4 Cyl 2.5L | QR25DER
View related parts
Nissan Murano Back Door Pull Handle
Part Number: 90940-CC20D
$31.05 MSRP: $46.69
You Save: $15.64 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle-Pull,Back Door; Handle, Pull Handle
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2014 Nissan Murano | LE, LE/ROOF, S, SE, SL, SL/ROOF, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Rear Door Inside Handle Assembly Left
Part Number: 80671-5AA0A
$36.63 MSRP: $55.09
You Save: $18.46 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assy-Rear Door Inside,Lh; Inside Handle
- Position: Driver side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2015-2024 Nissan Murano | Midnight Edition, Platinum, S, SL, SV | 4 Cyl 2.5L, 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | QR25DER, VQ35DE
View related parts
Nissan Murano Outside Handle Grip
Part Number: 80640-CB012
$114.34 MSRP: $176.18
You Save: $61.84 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Grip-Outside Handle
- Replaced by: 80640-CB01A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2007 Nissan Murano | SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Back Door Pull Handle
Part Number: 90940-CA001
$33.70 MSRP: $54.44
You Save: $20.74 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle-Pull,Back Door. This item subject to a 40% restocking fee if returned.; Handle
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2007 Nissan Murano | S, SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Back Door Pull Handle
Part Number: 90940-3JA0B
$27.82 MSRP: $41.84
You Save: $14.02 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle-Pull,Back Door; Pull Handle
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2018-2019 Nissan Murano | Platinum, S, SL, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Outside Handle Grip, Passenger Side
Part Number: 80640-4BA0B
$61.09 MSRP: $94.13
You Save: $33.04 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Grip-Outside Handle,Rh
- Position: Passenger Side
- Replaced by: 80640-4BA1C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2015-2019 Nissan Murano | Platinum, S, SL, SV | 4 Cyl 2.5L, 6 Cyl 3.5L | QR25DER, VQ35DE
View related parts
Nissan Murano Grip-Outside Handle
Part Number: 80640-4BA1C
$61.09 MSRP: $94.13
You Save: $33.04 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Outside Handle
- Replaces: 80640-5HA0B, 80640-4BA0B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2020-2024 Nissan Murano | Midnight Edition, Platinum, S, SL, SV | 6 Cyl 3.5 L GAS
View related parts
Nissan Murano Rear Door Inside Handle Assembly, Passenger Side
Part Number: 80670-5AA0A
$36.63 MSRP: $55.09
You Save: $18.46 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Assy-Rear Door Inside,Rh; Inside Handle
- Manufacturer Note: HNDL RR DR INSIDE
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2015-2024 Nissan Murano | Midnight Edition, Platinum, S, SL, SV | 4 Cyl 2.5L, 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | QR25DER, VQ35DE
View related parts
Nissan Murano Outside Handle Grip
Part Number: 80640-CA000
$101.50 MSRP: $156.40
You Save: $54.90 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Grip-Outside Handle
- Replaced by: 80640-CA012
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2005 Nissan Murano | S, SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Back Door Pull Handle
Part Number: 90940-CA000
$33.70 MSRP: $54.44
You Save: $20.74 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle-Pull,Back Door. This item subject to a 40% restocking fee if returned.; Handle
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2006 Nissan Murano | S, SE, SL | 6 Cyl 3.5L | VQ35DE

| Page 1 of 3 |Next >

1-20 of 50 Results

Nissan Murano Door Handle

If you need any OEM Nissan Murano Door Handle, feel free to choose them out of our huge selection of genuine Nissan Murano Door Handle. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Murano Door Handle Parts Questions & Experts Answers

Back Door Pull Handle
90940-CC20D
Q: How do you remove and install the inside door handle, key lock cylinder, outside door handle, and door latch on Nissan Murano?
A:
To remove the inside door handle, first take off the door trim panel, disconnect the actuator cable from the handle, and unscrew the handle from the backside of the door trim panel. Installation is the reverse of removal. For the key lock cylinder and outside door handle, begin by removing the door trim panel, then take out the door window glass and the door module assembly. Remove the rubber plug from the rear edge of the door to access the Torx bolt securing the key lock cylinder, and loosen the bolt without removing it completely. Disconnect the actuator rod connecting the key lock cylinder to the door latch assembly by popping off the clip and pushing the rod out. If removing the outside door handle, disconnect the upper end of the rod; if removing the latch assembly, disconnect the lower end. Pull the outside door handle to remove the lock cylinder assembly or the outside handle trim cap. To remove the outside handle, pull it out and slide it to the rear, then slide the mounting bracket toward the rear of the vehicle and pull it out of the door, disconnecting the actuator cable. Installation is the reverse of removal. For the door latch, remove the door trim panel, the door window glass, and the door module assembly. Detach the latch from the door by removing the Torx bolts from the rear edge and pulling the latch assembly out. Disconnect the electrical connector and the actuator cable from the door latch before removing the latch assembly. Installation is the reverse of removal.