In regard to the procedure, it has been undertaken to affect the front doors alone. Start by the performance of the following operations, the preliminary procedure: removal of the door trim panel and the plastic watershield. And after that, remove the window assembly. As for the power windows, remove the electrical connector of the Window Regulator motor. Subsequently, turn off the bolts and if the door has one, disconnect the door brace that is there. Continue to disassemble the window track which includes the regulator bolts and rivets, which are four window track bolts and the regulator rivets need to be drilled out. Last, retract the track and Window Regulator/motor assembly through the service opening in the door framework to accomplish removal and the procedure for installing is the opposite of the removal procedure.