Q: How to remove and install the heating and air conditioning control panel/cover assembly in a Nissan Rogue?A: Disconnect the battery's negative terminal. For 2013 and earlier models/2014 and later Rogue Select models, pry up the gear shift cover and remove. Pry out the A/C switch cover assembly, disconnect the electrical connectors. Remove the assembly-to-cover screws and separate the cover from the assembly. Installation is the reverse of removal. Reconnect the battery and perform re-learn procedures. For 2014 and later models (except Rogue Select), the control assembly and panel are replaced as a unit if faulty. Pry out the A/C switch/cover assembly, disconnect the connectors. Installation is the reverse of removal. Reconnect the battery and perform re-learn procedures.