How to remove and install the hood cable and hood latch on the Nissan Titan?

First, to release the latch, it is necessary to disassemble the latch assembly while loosening every hood latch bolt and fine tuning the latch. Release the compression spring and remove the cables out by lifting the section of the cable housing out of its slot and pulling on the end of the cable to free it from the hook of the latch arm. To install it, reverse the above process and make some adjustments like; lift the latch so that when the hood is closed, it locks and does not easily come off, the hood bumpers should be slightly compressed. To ease the release cable, remove the radiator support clips and the driver's side knee bolster. Third, remove the snap ring that holds the mounting fastener for the hood release handle, disconnect the cable from the handle by pulling it through the slot and, gripping the tangs, pressing it to unlock the casing of the cable. Take a length of wire and secure it towards the interior end of the cable to help in the installation of the new cable; trace the laid down cable forward to the grommet on the firewall and knock it off and pulling the old cable through the firewall from the engine side. Retract the guide wire from the old cable and connect it to the new one and then pull the wire via the firewall until the new cable reaches up to the release handle and the grommet is in place on the other side of the hole. Perform all the steps in the opposite of the removal in order to finalise the installation.

Genuine Nissan Titan Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Hood Cables found

View related parts
Nissan Titan Cable Hood Lock
Part Number: 65621-ZR00A
$30.64 MSRP: $46.07
You Save: $15.43 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Lock Control; Release Cable
- Replaces: 65620-7S000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2015 Nissan Titan | LE, Off-Road, PRO-4X, S, SE, SL, SV, XE | 8 Cyl 5.6L | VK56DE
View related parts
Nissan Titan Cable Assembly-Hood Lock
Part Number: 65620-7S000
$30.64 MSRP: $46.07
You Save: $15.43 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Lock Control
- Replaced by: 65621-ZR00A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2007 Nissan Titan | LE, SE, XE | 8 Cyl 5.6L | VK56DE
View related parts
Nissan Titan Hood Lock Control Cable Assembly
Part Number: 65621-EZ00C
$101.14 MSRP: $155.84
You Save: $54.70 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Lock Control; Release Cable
- Replaces: 65621-EZ00B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2019 Nissan Titan | Platinum, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.0L Diesel, 8 Cyl 5.6L | CEV8D1, VK56VD
View related parts
Nissan Titan Hood Lock Control Cable Assembly
Part Number: 65621-9FV4A
$96.32 MSRP: $148.42
You Save: $52.10 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Lock Control; Release Cable
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2020-2024 Nissan Titan | PRO-4X, Platinum Reserve, S, SL, SV | 8 Cyl 5.6 L GAS
View related parts
Nissan Titan Hood Lock Control Cable Assembly
Part Number: 65621-9FV0A
$96.32 MSRP: $148.42
You Save: $52.10 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Lock Control; Release Cable
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2020-2024 Nissan Titan | PRO-4X, Platinum Reserve, S, SL, SV | 8 Cyl 5.6 L GAS
View related parts
Nissan Titan Cable Hood Lock
Part Number: 65621-EZ00B
$101.14 MSRP: $155.84
You Save: $54.70 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Lock Control; Release Cable
- Replaced by: 65621-EZ00C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2018 Nissan Titan | Platinum, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.0L Diesel, 8 Cyl 5.6L | CEV8D1, VK56VD
View related parts
Nissan Titan Cable Hood Lock
Part Number: 65621-EZ40A
$96.32 MSRP: $148.42
You Save: $52.10 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Lock Control; Release Cable
- Replaced by: 65621-EZ40B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2018 Nissan Titan | Platinum, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.6L | VK56VD
View related parts
Nissan Titan Hood Lock Control Cable Assembly
Part Number: 65621-EZ40B
$96.32 MSRP: $148.42
You Save: $52.10 (36%)
Product Specifications
- Other Name: Cable Assembly-Hood Lock Control; Release Cable
- Replaces: 65621-EZ40A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2019 Nissan Titan | Platinum, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.6L | VK56VD

Nissan Titan Hood Cable

The Nissan Titan Hood Cable connects the release handle on the dashboard to the twin latch assembly, providing quick and easy access to the engine bay. The Hood Cable within each Titan pickup runs from the interior lever to a junction underneath the hood, where it splits so that each latch gets its own pull to ensure both sides pop simultaneously. Repeated flexing and jolts from the highway eventually take their toll on the outer sheath, as cracks allow water penetration. Eventually, the steel core stretches or breaks and will not allow the driver to lift the hood. Every now and then, your Hood Cable should work the latch in one movement. This ensures that your bonnet does not get stuck shut. The early model years relied on the same basic single-strand steel design as the later trucks. Therefore, the differences in style are limited to length and routing to match grille or latch revisions, not operating principle. No matter which version of Nissan truck you have, the Hood Cable's goal is the same: convert a light tug at the lever into a firm release at both catches. By replacing a frayed Hood Cable, it will allow full control over the vehicle, simplify oil checks, and prevent the hassle of a sealed hood on the Titan. Thanks to its smooth cable, your Nissan is always ready to work in wet weather.

If you need any OEM Nissan Titan Hood Cable, feel free to choose them out of our huge selection of genuine Nissan Titan Hood Cable. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Titan Hood Cable Parts Questions & Experts Answers

Cable Hood Lock
65621-ZR00A
Q: How to remove and install the hood cable and hood latch on the Nissan Titan?
A:
First, to release the latch, it is necessary to disassemble the latch assembly while loosening every Hood latch bolt and fine tuning the latch. Release the compression spring and remove the cables out by lifting the section of the cable housing out of its slot and pulling on the end of the cable to free it from the hook of the latch arm. To install it, reverse the above process and make some adjustments like; lift the latch so that when the hood is closed, it locks and does not easily come off, the hood bumpers should be slightly compressed. To ease the release cable, remove the radiator support clips and the driver's side knee bolster. Third, remove the snap ring that holds the mounting fastener for the hood release handle, disconnect the cable from the handle by pulling it through the slot and, gripping the tangs, pressing it to unlock the casing of the cable. Take a length of wire and secure it towards the interior end of the cable to help in the installation of the new cable; trace the laid down cable forward to the grommet on the firewall and knock it off and pulling the old cable through the firewall from the engine side. Retract the guide wire from the old cable and connect it to the new one and then pull the wire via the firewall until the new cable reaches up to the release handle and the grommet is in place on the other side of the hole. Perform all the steps in the opposite of the removal in order to finalise the installation.