How to remove and reinstall a Nissan Xterra's flywheel or driveplate?

Raise the vehicle and support it securely on jackstands, then remove the transmission. If the vehicle is equipped with a manual transmission, remove the pressure plate and clutch disc. Now is a good time to check/replace the clutch components and pilot bushing if necessary. If the vehicle is equipped with an automatic transmission, now would be a good time to check and replace the front pump seal/O-ring. Use paint or a center-punch to make alignment marks on the flywheel/driveplate and crankshaft to ensure correct alignment during reinstallation. Remove the bolts that secure the flywheel/driveplate to the crankshaft. If the crankshaft turns, hold the flywheel with a pry bar or wedge a screwdriver into the ring gear teeth to jam the flywheel. Remove the flywheel/driveplate from the crankshaft. Since the flywheel is fairly heavy, be sure to support it while removing the last bolt. Clean the flywheel to remove grease and oil. Inspect the surface for cracks, rivet grooves, burned areas and score marks. Light scoring can be removed with emery cloth. Check for cracked and broken ring gear teeth or a loose ring gear. Lay the flywheel on a flat surface and use a straightedge to check for warpage. Clean and inspect the mating surfaces of the flywheel/driveplate and the crankshaft. If the crankshaft rear seal is leaking, replace it before reinstalling the flywheel/driveplate. Position the flywheel/driveplate against the crankshaft: Be sure to align the marks made during removal. Note that some engines have an alignment dowel or staggered bolt holes to ensure correct installation. Before installing the bolts, apply thread locking compound to the threads. Wedge a screwdriver into the ring gear teeth to keep the flywheel/ driveplate from turning as you tighten the bolts to the specific torque. The remainder of installation is the reverse of the removal.

Genuine Nissan Xterra Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Flywheels found

View related parts
Nissan Xterra Flywheel Assembly
Part Number: 12310-EA200
$627.71 MSRP: $886.60
You Save: $258.89 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel
- Manufacturer Note: MANUAL TRANSMISSION
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2015 Nissan Xterra | Base Camp, Off-Road, PRO-4X, S | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Xterra Flywheel Assembly
Part Number: 12310-F4500
$449.26 MSRP: $634.55
You Save: $185.29 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Drive Plate, Flywheel
- Replaces: 12310-F4004, 12310-F4003, 12310-F4001
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2004 Nissan Xterra | XE | 4 Cyl 2.4L | KA24DE
View related parts
Nissan Xterra Flywheel Assembly
Part Number: 12310-0W001
$639.68 MSRP: $903.50
You Save: $263.82 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Drive Plate, Flywheel
- Replaces: 12310-0W000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2004 Nissan Xterra | SE, XE | 6 Cyl 3.3L | VG33E
View related parts
Nissan Xterra Flywheel Assembly
Part Number: 12310-F4004
$449.26 MSRP: $634.55
You Save: $185.29 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 12310-F4500
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2001-2004 Nissan Xterra | XE | 4 Cyl 2.4L | KA24DE
View related parts
Nissan Xterra Flywheel Assembly
Part Number: 12310-F4003
$449.26 MSRP: $634.55
You Save: $185.29 (30%)
ADD TO CART
Product Specifications
- Replaced by: 12310-F4500
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2001-2002 Nissan Xterra | XE | 4 Cyl 2.4L | KA24DE
View related parts
Nissan Xterra Flywheel Assembly
Part Number: 12310-F4001
$449.26 MSRP: $634.55
You Save: $185.29 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 12310-F4500
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2002 Nissan Xterra | XE | 4 Cyl 2.4L | KA24DE
View related parts
Nissan Xterra Flywheel Assembly
Part Number: 12310-5S700
Product Specifications
- Other Name: Flywheel
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2001-2004 Nissan Xterra | SE, XE | 6 Cyl 3.3L | VG33ER

Nissan Xterra Flywheel

The Nissan Xterra Flywheel is vital for improving the performance and reliability of the vehicle due to the storage of rotational energy to provide a smooth flow of power. This heavy metal disc is firmly bolted to the crankshaft and is important in the starting operation, as it gives the starter the opportunity to interact with the ring gear of the Flywheel to rotate the Nissan crankshaft until combustion is provided. After starting the engine, the Flywheel's inertia can average out the torque pulses and gives the Nissan Xterra drivetrain more of a continuous power flow. This element is applicable to different models of the Xterra and is an essential part of the driving experience for all owners. The Flywheel also has a friction surface that is applied in conjunction with the pressure plate and the clutch disc to allow the driver to have good control over engine power and transmission engagement in the manual gearbox models. Flywheels are of two types: solid and dual mass. Of particular interest is the dual mass Flywheel, which makes use of separate masses and springs to absorb vibration and makes driving in the car more comfortable. Resurfacing solid Flywheels is often possible, but not always, whereas dual mass units simply cannot be machined, since it would interfere with their damping operation. In case of problems such as scoring, cracks, or internal damper failure, changing the Nissan Xterra Flywheel would reestablish starting smoothness and clutch engagement for the vehicle. The reliability and performance of this component have made it a unique feature in the automotive market that guarantees the Nissan Xterra will be a reliable option for drivers who want to be efficient and safe at the same time.

If you need any OEM Nissan Xterra Flywheel, feel free to choose them out of our huge selection of genuine Nissan Xterra Flywheel. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Xterra Flywheel Parts Questions & Experts Answers

Flywheel Assembly
12310-F4500
Q: How to remove and reinstall a Nissan Xterra's flywheel or driveplate?
A:
Raise the vehicle and support it securely on jackstands, then remove the transmission. If the vehicle is equipped with a manual transmission, remove the pressure plate and clutch disc. Now is a good time to check/replace the clutch components and pilot bushing if necessary. If the vehicle is equipped with an automatic transmission, now would be a good time to check and replace the front pump seal/O-ring. Use paint or a center-punch to make alignment marks on the flywheel/driveplate and crankshaft to ensure correct alignment during reinstallation. Remove the bolts that secure the flywheel/driveplate to the crankshaft. If the crankshaft turns, hold the flywheel with a pry bar or wedge a screwdriver into the ring gear teeth to jam the flywheel. Remove the flywheel/driveplate from the crankshaft. Since the flywheel is fairly heavy, be sure to support it while removing the last bolt. Clean the flywheel to remove grease and oil. Inspect the surface for cracks, rivet grooves, burned areas and score marks. Light scoring can be removed with emery cloth. Check for cracked and broken ring gear teeth or a loose ring gear. Lay the flywheel on a flat surface and use a straightedge to check for warpage. Clean and inspect the mating surfaces of the flywheel/driveplate and the crankshaft. If the crankshaft rear seal is leaking, replace it before reinstalling the flywheel/driveplate. Position the flywheel/driveplate against the crankshaft: Be sure to align the marks made during removal. Note that some engines have an alignment dowel or staggered bolt holes to ensure correct installation. Before installing the bolts, apply thread locking compound to the threads. Wedge a screwdriver into the ring gear teeth to keep the flywheel/ driveplate from turning as you tighten the bolts to the specific torque. The remainder of installation is the reverse of the removal.