Nissan 39241-5V026 Repair Kt Outer

When inspecting the steering and suspension components, you should check for damage, distortion, and leaks. Pay attention to seals, boots, bushings, control arms, tie-rod ends, and ball joints.

To reassemble the inner CV joint, follow these steps: Wrap the axleshaft splines with tape to protect the boot. Slide the small boot clamp and boot onto the axleshaft, then remove the tape. Slide the large boot clamp over the boot. Slide the housing onto the shaft. Install the spider assembly, aligning the marks you previously made. Install a new snap-ring. Apply CV joint grease to the spider assembly and housing for lubrication. Move the housing up onto the spider, aligning the marks. Apply RTV sealant to a new cover and tap the cover into place. Fill the housing with around 3-1/2 ounces (100 g) of CV joint grease. Adjust the CV joint to the desired length. Equalize the pressure in the boot and install the boot clamps.