Nissan 38164-12G60 Shaft Assy-Rear Axle

For other models not mentioned earlier, disconnect the parking brake cables from the crank levers on the backing plates. Unscrew the nuts from the spring U-bolts and remove the spring plates.

For Pathfinder models, support the front axle assembly with a floor jack placed under the differential. Then, remove the mounting bolts from the support brackets at either end of the axle/differential assembly and slowly lower the assembly to remove it from under the vehicle.

When reinstalling the drive axle in Pathfinder models, inspect the needle bearing in the knuckle for wear and ensure the correct orientation. Install the thrust washer on the drive axle with the chamfer facing the axle's center. Lubricate necessary parts, guide the drive axle into position, and reconnect it. Connect the ball joint to the control arm, check the O-rings on the drive flange, and finalize the installation.