This part fits the vehicle you selected:
My Vehicle: 1986 Nissan 300ZX 2+2 Seater; 6 Cyl 3.0L; GL; Manual Transmission; 5-Speed Manual Transmission; T-Bar Roof Model; Federal
The location this part fits:
  • Rear Upper
The vehicle options this part fits:
  • Production Date: 07/1983-
  • Fitting Vehicle Options: VG30 + VG30T
Change Vehicle

Nissan 21477-01P00 SHROUD-Upper

1984-1989 Nissan 300ZX 2147701P00

Nissan 21477-01P00 SHROUD-Upper
  • Part Description
    Shroud-Radiator,Upper
  • Lookup Code
    21476
  • Position
    Rear Upper
  • Manufacturer
    Nissan
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers
This part fits the vehicle you selected:
1986 Nissan 300ZX 2+2 Seater; 6 Cyl 3.0L; GL; Manual Transmission; 5-Speed Manual Transmission; T-Bar Roof Model; Federal
The location this part fits:
  • Rear Upper
The vehicle options this part fits:
  • Production Date: 07/1983-
  • Fitting Vehicle Options: VG30 + VG30T
Check another vehicle

Product Specifications

BrandGenuine Nissan
Lookup Code21476
Manufacturer Part Number21477-01P00
Part DescriptionShroud-Radiator,Upper
Other NamesShroud
Item Dimensions20.8 x 19.7 x 7.1 inches
Item Weight1.70 Pounds
PositionRear Upper
ConditionNew
Fitment TypeDirect Replacement
ManufacturerNissan
SKU21477-01P00
WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
Shipping & ReturnShipping Policy Return Policy
Warning: California’s Proposition 65

Customer Questions & Answers

Q:
Does this part fit my vehicle? Posted by NissanPartsDeal Specialist
A:
You can Select Your Vehicle to check if 21477-01P00 fits your vehicle.
Posted by NissanPartsDeal Specialist
Q:
How to remove and install the fan shroud and fan assembly in a Nissan 300ZX? Posted by Customer
A:
Disconnect the negative cable at the battery and place the cable out of the way so it cannot accidentally come in contact with the negative terminal of the battery, as this would once again allow power into the electrical system of the vehicle. Remove the radiator shroud retaining bolt securing the shroud to the upper crossmember. From under the vehicle, use a small screwdriver to remove the three retaining clips attaching the shroud to the radiator. Remove the clips by prying up on the retaining clip until the clip can be pried over its plastic retaining tab. At this point the shroud can be lifted out of the engine compartment. Remove the fan and fan coupling from the water pump by removing the four retaining nuts. To separate the fan from the fluid coupling, remove the four retaining bolts. The fan assembly is installed by reversing the above steps. Tighten all fasteners to the proper torque.
Posted by NissanPartsDeal Specialist
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly