Nissan 32006-2W510 Transfer Neutral Position Switch

You can Select Your Vehicle to check if 32006-2W510 fits your vehicle.

The back-up light switch is located on the right side of the transmission case and should go on when the ignition key is turned to the On position and the shift lever is moved to the Reverse position. If the lights don't go on, check the back-up light fuse first. If the fuse is okay, raise the vehicle and support it securely on jackstands. Unplug the back-up light switch electrical connector and check for continuity across the terminals of the switch. If the switch has continuity, check for voltage at the electrical connector. If no voltage is present, trace the circuit between the fuse block and the electrical connector for an open circuit condition. If voltage is present, trace the back-up light circuit between the electrical connector and the back-up light bulbs for an open circuit condition. To replace the switch, unscrew it from the transmission case, apply RTV sealant or Teflon tape to the threads of the new switch, install it in the transmission case, plug in the electrical connector, lower the vehicle and check the operation of the back-up lights.