Nissan F3112-7Z030 Fender Front Rh

Float your batteries red cable safely with the family. Go easy on your front fender's lug nuts, lift your car, set reliable jackstands under it, then pull off this wheel. Take off the front of the car, the bumper, and both the wheelwell protectors, if your car has those. Start by taking off the cowl cover from the side which you plan to remove the fender. Lift the liner in the fenderwell by prying off the plastic rivets, removing the screws, and pulling it out. Unfasten all lower fender bolts: those behind its front edge, the mount from the wheelwell to the door panel, and the one attaching the bottom to the rocker panel. Unhook the doorjamb bolt from the upper end of the fender, exposed when the door is opened. Take off all fender top bolts, both sides, and unclasp bolts attaching the pencil brace at the front of the driver's side fender. Carefully remove the fender alone or with help, following steps that guide the worker to stay clear of damage to other body parts during movement. To put the fender back in place, secure all nuts, bolts, and screws properly, just like we took them out.