How to remove and install the axle shaft on the 1989 Nissan 240sx?

To remove and install the axle shaft, put a dowel pin or a similar type part through the right side axle shaft hole and with a small hammer strike the left axle shaft out of the transaxle case. Pull off the shaft from the steering knuckle and eliminate it, however ensure that do not cause harm to the pinion mating shaft as well as the side gear. For the overhaul, adhere to the service procedures concerning the manual transaxle.

Genuine 1989 Nissan 240SX Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Axle Shafts found

View related parts
1989 Nissan 240SX Shaft-Rear Drive LH
Part Number: 39705-35F60
Product Specifications
- Other Name: Shaft-Rear Drive,LH; Axle Shafts, Shaft
- Position: Driver Side
- Lookup Code: 39605
- Item Weight: 10.40 Pounds
- Item Dimensions: 20.0 x 1.6 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 39705-35F60
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 1989 Nissan 240SX Submodels:
- 4 Cyl 2.4L | KA24D, KA24E
View related parts
1989 Nissan 240SX Shaft Rear Drive RH
Part Number: 39704-35F50
Product Specifications
- Other Name: Shaft-Rear Drive,RH; Axle Shafts, Shaft
- Position: Passenger Side
- Lookup Code: 39604M
- Item Weight: 5.70 Pounds
- Item Dimensions: 19.9 x 2.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 39704-35F50
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 1989 Nissan 240SX Submodels:
- 4 Cyl 2.4L | KA24D, KA24E
View related parts
1989 Nissan 240SX Shaft Assembly-Rear Drive LH
Part Number: 39601-35F10
Product Specifications
- Other Name: Shaft Assy-Rear Drive,LH; Axle, Axle Assembly, Axle Shaft Assembly
- Position: Driver Side
- Lookup Code: 39601
- Item Weight: 18.00 Pounds
- Item Dimensions: 27.3 x 7.6 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 39601-35F10
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 1989 Nissan 240SX Submodels:
- SE, STD | 4 Cyl 2.4L | KA24D, KA24DE, KA24E
View related parts
1989 Nissan 240SX Shaft-Rear Drive RH
Part Number: 39600-35F00
Product Specifications
- Other Name: Shaft Assy-Rear Drive,RH; Axle, Axle Assembly, Axle Shaft Assembly
- Position: Passenger Side
- Lookup Code: 39600M
- Item Weight: 37.10 Pounds
- Item Dimensions: 30.2 x 5.8 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 39600-35F00
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 1989 Nissan 240SX Submodels:
- 4 Cyl 2.4L | KA24D, KA24E

1989 Nissan 240SX Axle Shaft

Committed to delivering top-notch quality at affordable prices, our website is your go-to source for OEM 1989 Nissan 240SX Axle Shaft worldwide. Each of our genuine 1989 Nissan 240SX Axle Shaft come with a manufacturer's warranty, so rest assured, quality and cost are covered. With us, you're making a smart choice that stands the test of time.

1989 Nissan 240SX Axle Shaft Parts Questions & Experts Answers

Q: How to remove and install the axle shaft on the 1989 Nissan 240sx?
A: To remove and install the axle shaft, put a dowel pin or a similar type part through the right side axle shaft hole and with a small hammer strike the left axle shaft out of the transaxle case. Pull off the shaft from the steering knuckle and eliminate it, however ensure that do not cause harm to the pinion mating shaft as well as the side gear. For the overhaul, adhere to the service procedures concerning the manual transaxle.