How to remove and install the Coolant Temperature Sensor and Oil Pressure Switch on Nissan 240sx?

Remove/ install Coolant Temperature Sensor, but removing/ installing Coolant Temperature Sensor you have first to disconnect negative battery cable. Lose the cooling system until the coolant level goes down below the coolant sensor position. Loosen the electrical connector at the base of the sensor, and pull on it to remove the sensor from the engine. On some applications, the coolant sensor screws into the thermostat housing. Installation is the mirroring of the removal method, only in this instance it is carried out in the opposite order. This is to include procedures such as filling and bleeding of the cooling system. For the Oil Pressure Switch, loosen the negative battery terminal and the electrical connection from the oil pressure switch. Take off the oil pressure switch on the engine. Installation is done in the opposite manner of the removal process indicated above, the difference being that there is no need to wrap copper wires around a cable. Check the oil level.

Genuine Nissan 240SX Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Coolant Temperature Sensors found

View related parts
Nissan 240SX Engine Coolant Temperature Sender
Part Number: 25080-89903
$25.49 MSRP: $38.33
You Save: $12.84 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Temp Gauge ; Sensor-Temperature; Temperature Sending Unit
- Manufacturer Note: SMALL TYPE,M12
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1989-1994 Nissan 240SX | 4 Cyl 2.4L | KA24D, KA24E
View related parts
Nissan 240SX COOLANT Temperature Sensor
Part Number: 25080-89907
$35.57 MSRP: $46.70
You Save: $11.13 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-Temperature; Temperature Sending Unit
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1998 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24DE
View related parts
Nissan 240SX Engine Coolant Temperature Sensor
Part Number: 22630-51E00
$31.05 MSRP: $42.80
You Save: $11.75 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Asy Temp ; Engine Coolant Temperature Sensor
- Replaced by: 22630-51E02
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1989-1996 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24D, KA24DE, KA24E
View related parts
Nissan 240SX Engine Coolant Temperature Sensor
Part Number: 22630-V5010
$31.05 MSRP: $42.80
You Save: $11.75 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Asy Temp
- Replaced by: 22630-51E02
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1989-1991 Nissan 240SX | 4 Cyl 2.4L | KA24E
View related parts
Nissan 240SX COOLANT Temperature Sensor
Part Number: 22630-44B10
$33.98 MSRP: $49.22
You Save: $15.24 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Coolant Temperature Sensor
- Replaced by: 22630-ED000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1998 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24DE
View related parts
Nissan 240SX Switch-Thermometer
Part Number: 21595-40F00
Product Specifications
- Other Name: Temperature Switch
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1989-1991 Nissan 240SX | 4 Cyl 2.4L | KA24E

Nissan 240SX Coolant Temperature Sensor

The Nissan 240SX Coolant Temperature Sensor tracks the temperature of the engine coolant and sends that information to the engine control module for proper engine operation. This Coolant Temperature Sensor threads straight into the Nissan 240SX engine's coolant passage, allowing it to be immersed in coolant so it can read heat. This component functions as a negative temperature coefficient (NTC) thermistor that reduces electrical resistance with a rise in temperature, thereby permitting a steady 5-volt reference from the ECM returning at varying voltages corresponding to specific degrees. Through the use of this information, the computer can enrich the fuel mixture for cold starts, raise idle speed to prevent stalling, and command the electric cooling fan for airflow when needed. The Coolant Temperature Sensor provides essential feedback to the control unit, allowing the activation of systems such as EGR, evaporative purge, and torque converter clutch only once a safe operating warmth is achieved. As the Coolant Temperature Sensor is a low current sensor, devices that draw high current, such as the radiator fan, are turned on by relays. This protects the Nissan electrical circuits. As a result, the Coolant Temperature Sensor reliably controls 240SX temperature under all Nissan 240SX driving conditions.

If you need any OEM Nissan 240SX Coolant Temperature Sensor, feel free to choose them out of our huge selection of genuine Nissan 240SX Coolant Temperature Sensor. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan 240SX Coolant Temperature Sensor Parts Questions & Experts Answers

Engine Coolant Temperature Sensor
22630-51E00
Q: How to remove and install the Coolant Temperature Sensor and Oil Pressure Switch on Nissan 240sx?
A:
Remove/ install Coolant Temperature Sensor, but removing/ installing Coolant Temperature Sensor you have first to disconnect negative battery cable. Lose the cooling system until the coolant level goes down below the coolant sensor position. Loosen the electrical connector at the base of the sensor, and pull on it to remove the sensor from the engine. On some applications, the coolant sensor screws into the thermostat housing. Installation is the mirroring of the removal method, only in this instance it is carried out in the opposite order. This is to include procedures such as filling and bleeding of the cooling system. For the Oil Pressure Switch, loosen the negative battery terminal and the electrical connection from the oil pressure switch. Take off the oil pressure switch on the engine. Installation is done in the opposite manner of the removal process indicated above, the difference being that there is no need to wrap copper wires around a cable. Check the oil level.