How to handle the situation if the wheel seal does not fit properly into the carrier during installation on Nissan 240sx?

Before removing the half shaft, the following service procedure should be strictly followed. If available, take off the side flange by employing a puller suitable for it, in that case ensure that the matching mark is put in place for assembly. Then, remove the oil seal from the mechanical help. During assembly of the carrier, to the sealing lips of the oil seal it is necessary to apply multi-purpose grease and press it into the carrier. If fitted it is recommended to fit the side flange with the help of special tool J39352 or its equivalent. Last, but not the least, replace the half shaft and check the level of the Power Steering Fluid.

Genuine Nissan 240SX Wheel Seal

Wheel Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Seals found

View related parts
Nissan 240SX Oil Seal
Part Number: 38342-N3100
$15.89 MSRP: $21.90
You Save: $6.01 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal-Oil,Side Flange
- Replaces: 38342-P9000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1989-1998 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24D, KA24DE, KA24E
View related parts
Nissan 240SX Seal-Grease,Rear Hub
Part Number: 39252-35F03
$56.35 MSRP: $81.60
You Save: $25.25 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Position: Rear
- Replaced by: 39252-35F6C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1989-1998 Nissan 240SX | SE, STD | 4 Cyl 2.4L | KA24D, KA24DE, KA24E
View related parts
Nissan 240SX Catcher-Grease,Front
Part Number: 40242-35F00
Product Specifications
- Other Name: Wheel Bearing Seal
- Position: Front
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1989-1994 Nissan 240SX | 4 Cyl 2.4L | KA24D, KA24E

Nissan 240SX Wheel Seal

Nissan 240SX Wheel Seal prevents lubricant from leaking out of the bearing assembly while also preventing dirt and debris from entering the assembly. This common circular seal surrounds the hub where grease surrounds the bearing to form a seal to stop leaks. The Wheel Seal stops oil or grease from leaking, which means that the wheel bearings are lubricated for smooth movement without overheating. The component protecting the bearing surfaces prevents rocks, dust, water, and other contaminants from causing wear and brittleness. Proper Wheel Seal functions ensure long bearing life and smooth operation of vehicles. Should the Wheel Seal crack or become ineffective, there is a risk for contamination and damage due to lubricant leak. The bearings of the Nissan 240SX are protected if inspected regularly. Many owners like that the Nissan 240SX design puts focus on reliable sealing. Due to the same basic design fulfilling both the front and rear hubs, the Nissan 240SX Wheel Seal is presented in a single reliable configuration for everyday reliable use.

If you need any OEM Nissan 240SX Wheel Seal, feel free to choose them out of our huge selection of genuine Nissan 240SX Wheel Seal. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan 240SX Wheel Seal Parts Questions & Experts Answers

Seal-Grease,Rear Hub
39252-35F03
Q: How to handle the situation if the wheel seal does not fit properly into the carrier during installation on Nissan 240sx?
A:
Before removing the half shaft, the following service procedure should be strictly followed. If available, take off the side flange by employing a puller suitable for it, in that case ensure that the matching mark is put in place for assembly. Then, remove the oil seal from the mechanical help. During assembly of the carrier, to the sealing lips of the oil seal it is necessary to apply multi-purpose grease and press it into the carrier. If fitted it is recommended to fit the side flange with the help of special tool J39352 or its equivalent. Last, but not the least, replace the half shaft and check the level of the Power Steering Fluid.