How do you remove and install a door handle and cylinder lock on Nissan 300ZX?

Remove the door trim panel, then disconnect the cylinder lock electrical connector if equipped. Remove the two nuts securing the door handle assembly to the door and pull the anti-theft shield away from the door handle. Use a screwdriver to disconnect the cylinder lock-to-latch actuating lever operating rod by pushing down on the yellow plastic rod fastener and pull the rod end from the latch actuator. Lift the handle out of the door and pry the key cylinder retaining clip up to release the cylinder lock, then pull the cylinder lock from the cylinder lock housing. Install the cylinder lock into the housing and secure it by pressing down on the key cylinder retaining clip. Insert the handle into the door, ensuring the door latch control rod slides into its actuating arm, then connect the cylinder lock-to-latch operating lever and secure it by turning the yellow plastic fastener up and snapping it to the rod. Install the anti-theft shield on the door handle, tighten the two handle retaining nuts, check the lock and door handle for proper operation, and finally, install the door trim panel.

Genuine Nissan 300ZX Door Lock Cylinder

Door Lock Cylinder Tumbler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Door Lock Cylinders found

View related parts
Nissan 300ZX Cylinder Set-Door Lock,LH
Part Number: 80601-30P25
$356.82 MSRP: $549.80
You Save: $192.98 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Driver side
- Replaced by: H0601-30P26
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1990-1994 Nissan 300ZX | GL, GLL | 6 Cyl 3.0L | VD30DTT, VG30D, VG30DTT
View related parts
Nissan 300ZX Cylinder Set-Back Door Lock
Part Number: 90600-21P27
Product Specifications
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1987-1989 Nissan 300ZX | SS | 6 Cyl 3.0L | VG30T
View related parts
Nissan 300ZX Cylinder Assembly Back Door Lock
Part Number: 90600-21P85
Product Specifications
- Other Name: Cylinder Set-Back Door Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1986-1989 Nissan 300ZX | GL, GLL | 6 Cyl 3.0L | VG30, VG30T
View related parts
Nissan 300ZX Cylinder Set-Trunk Lid Lock
Part Number: 84660-46P25
Product Specifications
- Replaced by: H4660-46P25
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1992-1996 Nissan 300ZX | GL | 6 Cyl 3.0L | VG30D
View related parts
Nissan 300ZX Cylinder BACK/DOOR Lock
Part Number: 90600-01P85
Product Specifications
- Other Name: Cylinder Set-Back Door Lock; Cylinder & Key
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1984-1987 Nissan 300ZX | GL, GLL | 6 Cyl 3.0L | VG30, VG30T
View related parts
Nissan 300ZX Cylinder Set-Back Door Lock
Part Number: 90600-30P25
$118.12 MSRP: $182.00
You Save: $63.88 (36%)
Product Specifications
- Replaced by: 90600-30P26
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1990-1994 Nissan 300ZX | GL, GLL | 6 Cyl 3.0L | VD30DTT, VG30D, VG30DTT
View related parts
Nissan 300ZX Cylinder Back Door Lock
Part Number: 90600-30P26
$118.12 MSRP: $182.00
You Save: $63.88 (36%)
Product Specifications
- Other Name: Cylinder Set-Back Door Lock; Cylinder & Key, Lock Cylinder
- Replaces: 90600-30P25
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1990-1996 Nissan 300ZX | GL, GLL | 6 Cyl 3.0L | VD30DTT, VG30D, VG30DTT
View related parts
Nissan 300ZX Cylinder Door Lock RH
Part Number: 80600-01P85
Product Specifications
- Other Name: Cylinder Set-Door Lock,RH; Cylinder & Key
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1984-1989 Nissan 300ZX | GL, GLL | 6 Cyl 3.0L | VG30, VG30T
View related parts
Nissan 300ZX Cylinder Door Lock LH
Part Number: 80601-01P85
Product Specifications
- Other Name: Cylinder Set-Door Lock,LH; Cylinder & Key
- Position: Driver side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1984-1989 Nissan 300ZX | GL, GLL | 6 Cyl 3.0L | VG30, VG30T
View related parts
Nissan 300ZX Cylinder Set-Door Lock,RH
Part Number: 80600-48P25
Product Specifications
- Other Name: Cylinder & Key, Lock Cylinder
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1993-1996 Nissan 300ZX | GL, GLL | 6 Cyl 3.0L | VD30DTT, VG30D, VG30DTT
View related parts
Nissan 300ZX Cylinder Set-Door Lock,LH
Part Number: 80601-48P25
$213.59 MSRP: $329.11
You Save: $115.52 (36%)
Product Specifications
- Other Name: Cylinder & Key, Lock Cylinder
- Position: Driver side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1993-1996 Nissan 300ZX | GL, GLL | 6 Cyl 3.0L | VD30DTT, VG30D, VG30DTT
View related parts
Nissan 300ZX Cylinder Set-Door Lock,RH
Part Number: 80600-30P25
Product Specifications
- Position: Passenger Side
- Replaced by: 80600-30P26
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1990-1994 Nissan 300ZX | GL, GLL | 6 Cyl 3.0L | VD30DTT, VG30D, VG30DTT

Nissan 300ZX Door Lock Cylinder

If you need any OEM Nissan 300ZX Door Lock Cylinder, feel free to choose them out of our huge selection of genuine Nissan 300ZX Door Lock Cylinder. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan 300ZX Door Lock Cylinder Parts Questions & Experts Answers

Cylinder BACK/DOOR Lock
90600-01P85
Q: How do you remove and install a door handle and cylinder lock on Nissan 300ZX?
A:
Remove the door trim panel, then disconnect the cylinder lock electrical connector if equipped. Remove the two nuts securing the door handle assembly to the door and pull the anti-theft shield away from the door handle. Use a screwdriver to disconnect the cylinder lock-to-latch actuating lever operating rod by pushing down on the yellow plastic rod fastener and pull the rod end from the latch actuator. Lift the handle out of the door and pry the key cylinder retaining clip up to release the cylinder lock, then pull the cylinder lock from the cylinder lock housing. Install the cylinder lock into the housing and secure it by pressing down on the key cylinder retaining clip. Insert the handle into the door, ensuring the door latch control rod slides into its actuating arm, then connect the cylinder lock-to-latch operating lever and secure it by turning the yellow plastic fastener up and snapping it to the rod. Install the anti-theft shield on the door handle, tighten the two handle retaining nuts, check the lock and door handle for proper operation, and finally, install the door trim panel.

Related Nissan 300ZX Parts

Browse by Year

1996 Door Lock Cylinder 1995 Door Lock Cylinder 1994 Door Lock Cylinder 1993 Door Lock Cylinder 1992 Door Lock Cylinder 1991 Door Lock Cylinder 1990 Door Lock Cylinder 1989 Door Lock Cylinder 1988 Door Lock Cylinder 1987 Door Lock Cylinder 1986 Door Lock Cylinder 1985 Door Lock Cylinder 1984 Door Lock Cylinder