How to remove and reinstall the Door Handle and Door Lock Cylinder on the Nissan 350Z?

First, to gain access to the door trim panel, it has to be pulled out then the door window glass is to be removed, then the window glass module assembly. Next, remove the door latch actuator rod from the handle and then the nuts or screws getting the latch out of the door and so finally the whole latch assembly will be detached. In case of their reinstallation, the manner should be commensurate and in the reverse order of that used in the removal process. Again perform the process of unbolting the door trim panel, the door window glass, and the assembly of window glass module. To disarm the outside handle, it is required to release the connection between the door latch actuator and the handle, extract the fasteners of the outside handle, and pull out the handle from the door before finally fixing it back through the reversal of the procedures followed.

Genuine Nissan 350Z Door Lock Cylinder

Door Lock Cylinder Tumbler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Door Lock Cylinders found

View related parts
Nissan 350Z Cylinder Set-Door Lock
Part Number: H0601-CD00A
$205.10 MSRP: $316.02
You Save: $110.92 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Set-Door Lock,LH; Cylinder & Keys, Lock Cylinder
- Position: Driver Side
- Replaces: H0601-CD000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2008 Nissan 350Z | 350Z, Base, Enthusiast, GT, Touring, Track | 6 Cyl 3.5L | VQ35DE, VQ35HR
View related parts
Nissan 350Z Cylinder Set-Door Lock
Part Number: H0601-CD000
$205.10 MSRP: $316.02
You Save: $110.92 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Set-Door Lock,LH
- Position: Driver side
- Replaced by: H0601-CD00A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2007 Nissan 350Z | 350Z, Base, Enthusiast, GT, Touring, Track | 6 Cyl 3.5L | VQ35DE

Nissan 350Z Door Lock Cylinder

The Door Lock Cylinder of the Nissan 350Z allows the driver to lock or unlock a vehicle using the car key at the door. The Door Lock Cylinder is located inside the front door. This component connects to the internal latch mechanism. Furthermore, the rotation of the key will make this part move. This will engage or disengage the components that come with locking. The turning of the key causes the pins and tumblers inside the Door Lock Cylinder on the 350Z to align, allowing the core to rotate to either lock the latch or free it to open the door. If applied continually, these internal mechanisms will wear out, which can make turning the key more difficult or it may even stick. This can result in more difficult entry or reduced security. The Nissan 350Z retains a key slot for your lock. A functioning Door Lock Cylinder is important as many modern models don't offer external key slots. Maintaining the Door Lock Cylinder of the Nissan 350Z aids it in simple manual locking without the usage of remote electronics and provides the Nissan sports car with a simple mechanical backup option.

If you need any OEM Nissan 350Z Door Lock Cylinder, feel free to choose them out of our huge selection of genuine Nissan 350Z Door Lock Cylinder. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan 350Z Door Lock Cylinder Parts Questions & Experts Answers

Cylinder Set-Door Lock
H0601-CD00A
Q: How to remove and reinstall the Door Handle and Door Lock Cylinder on the Nissan 350Z?
A:
First, to gain access to the door trim panel, it has to be pulled out then the door window glass is to be removed, then the window glass module assembly. Next, remove the door latch actuator rod from the handle and then the nuts or screws getting the latch out of the door and so finally the whole latch assembly will be detached. In case of their reinstallation, the manner should be commensurate and in the reverse order of that used in the removal process. Again perform the process of unbolting the door trim panel, the door window glass, and the assembly of window glass module. To disarm the outside handle, it is required to release the connection between the door latch actuator and the handle, extract the fasteners of the outside handle, and pull out the handle from the door before finally fixing it back through the reversal of the procedures followed.