Q: How Do You Remove and Install the Rear Wheel Hub and Bearing Assembly in the Nissan 350Z?A: Loosen the driveaxle/hub nut, wheel lug nuts, and brake caliper and disc. Push the driveaxle through the hub splines far enough to get access to the hub and wheel bearing mounting bolts on the back of the knuckle. Remove the hub mounting bolts from the back of the rear knuckle enough to release the hub assembly. Installation is the reverse of removal. Be sure to tighten the hub mounting bolts, brake caliper mounting bracket bolts, caliper mounting bolts, driveaxle/hub nut, and wheel lug nuts to the specified torque values.