How to replace the ignition lock cylinder and ignition switch on the Nissan Frontier?

The negative battery terminal cable needs to be unplugged. Take off the knee bolster and steering column covers. After that, track the wiring harness from the ignition switch down the column to disconnect the ignition switch electrical connector. The key should be inserted and continuity checked between indicated terminals of the connector at each position on the ignition switch. Replace if different from specified continuity. Also, verify that there is no wear or looseness in the ignition lock cylinder and that its key positions align with markings on housing. If the ignition lock cylinder is defective, the entire steering column lock assembly must be replaced. To replace, follow steps to access the ignition switch. The ignition lock cylinder cannot be replaced by itself: the whole housing must be replaced. Remove shear-head bolts retaining ignition switch/ignition lock cylinder assembly and separate bracket halves from the steering column. This can be done by drilling a hole in each bolt's center and removing them with screw extractors. Put new switch assembly into place, install shear-head bolts as well as tightening them until they snap at their heads. Finally, make sure you center the airbag clock spring when you are installing a steering wheel where it was removed.

Genuine Nissan Frontier Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

62 Ignition Lock Cylinders found

View related parts
Nissan Frontier Frame Assembly-Steering Lock
Part Number: D8701-EA00A
$139.42 MSRP: $196.92
You Save: $57.50 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Lock Cylinder, Steering Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2012 Nissan Frontier | LE, Off-Road, S, SE, SL, SV, XE | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Steering Lock Set
Part Number: D8700-4S100
$186.26 MSRP: $263.08
You Save: $76.82 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Set-Steering; Ignition Lock Cylinder, Lock, Lock Assembly
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1998-2002 Nissan Frontier | SC, SE, XE | 6 Cyl 3.3L | VG33E
View related parts
Nissan Frontier Cylinder Lock Key Set
Part Number: 99810-9BA4A
$126.35 MSRP: $194.69
You Save: $68.34 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Set-Cylinder Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2019 Nissan Frontier | S, XE | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Steering Lock Set
Part Number: D8700-5Z000
$255.41 MSRP: $360.75
You Save: $105.34 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Set-Steering
- Replaced by: D8700-5Z00J
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2018 Nissan Frontier | LE, Off-Road, PRO-4X, S, SE, SL, SV, XE | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE
- 2005-2007 Nissan Frontier | LE, Off-Road, SE | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Frontier Key Set Cylinder Lock
Part Number: 99810-9BA1A
$135.61 MSRP: $208.95
You Save: $73.34 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Set-Cylinder Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2010-2019 Nissan Frontier | LE, Off-Road, PRO-4X, SE, SL, SV | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Lock Steering
Part Number: D8700-4S125
$186.26 MSRP: $263.08
You Save: $76.82 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Set-Steering; Ignition Lock Cylinder, Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2001-2004 Nissan Frontier | SC, SE, XE | 6 Cyl 3.3L | VG33E
View related parts
Nissan Frontier Steering Lock Set
Part Number: D8700-EA01J
$274.15 MSRP: $387.22
You Save: $113.07 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Set-Steering
- Replaces: D8700-EA01K
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2019 Nissan Frontier | Off-Road, PRO-4X, S, SE, SV, XE | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Frame Assembly-Steering Lock
Part Number: D8701-EA010
$208.57 MSRP: $294.58
You Save: $86.01 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Lock Cylinder, Steering Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2009 Nissan Frontier | Off-Road, SE, XE | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Steering Lock Set
Part Number: D8700-5Z026
$236.00 MSRP: $333.33
You Save: $97.33 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Set-Steering
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2007 Nissan Frontier | LE, Off-Road, SE, XE | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Cylinder Lock Key Set
Part Number: 99810-9BA5A
$150.49 MSRP: $231.87
You Save: $81.38 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Set-Cylinder Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2010-2019 Nissan Frontier | Off-Road, PRO-4X, SE, SV | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Steering Lock Set
Part Number: D8700-EA010
$249.23 MSRP: $352.02
You Save: $102.79 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Set-Steering; Cylinder & Keys, Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2018 Nissan Frontier | PRO-4X, S, SV | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE
- 2009-2013 Nissan Frontier | Off-Road, PRO-4X, S, SE, SV, XE | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE
- 2005-2007 Nissan Frontier | Off-Road, SE, XE | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE
View More
View related parts
Nissan Frontier Cylinder Lock Key Set
Part Number: K9810-1Z602
$77.43 MSRP: $165.00
You Save: $87.57 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Set-Cylinder LOCK. This item subject to a 40% restocking fee if returned.; Lock Set
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2002-2004 Nissan Frontier | SC, SE, XE | 6 Cyl 3.3L | VG33E
View related parts
Nissan Frontier Key Set Cylinder Lock
Part Number: 99810-ZP04C
$75.99 MSRP: $117.09
You Save: $41.10 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Set-Cylinder Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2006-2011 Nissan Frontier | LE, Off-Road, SE, SV | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Frontier Cylinder Lock Key Set
Part Number: 99810-9BA8A
$116.77 MSRP: $179.93
You Save: $63.16 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Set-Cylinder Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2019 Nissan Frontier | S, XE | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Key Set Cylinder Lock
Part Number: 99810-ZP05B
$52.65 MSRP: $79.18
You Save: $26.53 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Set-Cylinder Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2006-2011 Nissan Frontier | Off-Road, SE, SV, XE | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Key Set Cylinder Lock
Part Number: 99810-ZP04B
$54.09 MSRP: $81.35
You Save: $27.26 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Set-Cylinder Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2006-2011 Nissan Frontier | LE, Off-Road, SE, SV, XE | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Key Set Cylinder Lock
Part Number: 99810-ZP04A
$72.15 MSRP: $108.42
You Save: $36.27 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Set-Cylinder LOCK. This item subject to a 40% restocking fee if returned.
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2006-2011 Nissan Frontier | LE, Off-Road, SE, SL, SV, XE | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Frame Assembly-Steering Lock
Part Number: 48701-EA01A
$70.42 MSRP: $99.47
You Save: $29.05 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Steering Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2017-2019 Nissan Frontier | PRO-4X, S, SV | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Cylinder Lock Key Set
Part Number: K9810-9Z410
$116.82 MSRP: $165.00
You Save: $48.18 (30%)
ADD TO CART
Limited Availability
Product Specifications
- Other Name: Key Set-Cylinder Lock; Lock Set
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2002 Nissan Frontier | SC, SE, XE | 6 Cyl 3.3L | VG33E
View related parts
Nissan Frontier Frame Assembly-Steering Lock
Part Number: 48701-EA00A
$281.26 MSRP: $364.47
You Save: $83.21 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 48701-EA00B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2018 Nissan Frontier | PRO-4X, S, SL, SV | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE

| Page 1 of 4 |Next >

1-20 of 62 Results

Nissan Frontier Ignition Lock Cylinder

Nissan Frontier Ignition Lock Cylinder controls engine start by requiring the correct key to turn the switch on the steering column. The wafer tumblers in the Ignition Lock Cylinder are unique to the key. When it inserts the key and twist it, the ignition switch sends battery power to the starter, ignition, fuel injection, or components and stops all power flow in the off or lock position. When the switch is on, the starter receives the current and the engine cranks. Similarly, when the switch is on, the engine and electrical features keep working. When the switch is acc, the radio will work but the engine will not run. Lock in automotive terms is where the key can be extracted, the steering shaft is mechanically locked, and an automatic transmission stays in park until the key returns. A column-mounted system is a device that blocks the steering to deter theft. It has coded keys that stop the engine from starting unless the code matches. Wear in the Ignition Lock Cylinder, key, or switch contacts can cause jamming during turning, prevent cranking, cause components to flicker, or shut off the engine as a result of vibration. Wear will always limit proper operation, so this is vital to every Nissan Frontier trip and overall Nissan Frontier reliability. The Ignition Lock Cylinder is also a core Nissan Frontier component. The Ignition Lock Cylinder is essential for security and functionality.

If you need any OEM Nissan Frontier Ignition Lock Cylinder, feel free to choose them out of our huge selection of genuine Nissan Frontier Ignition Lock Cylinder. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Frontier Ignition Lock Cylinder Parts Questions & Experts Answers

Steering Lock Set
D8700-3S510
Q: How to replace the ignition lock cylinder and ignition switch on the Nissan Frontier?
A:
The negative battery terminal cable needs to be unplugged. Take off the knee bolster and steering column covers. After that, track the wiring harness from the ignition switch down the column to disconnect the ignition switch electrical connector. The key should be inserted and continuity checked between indicated terminals of the connector at each position on the ignition switch. Replace if different from specified continuity. Also, verify that there is no wear or looseness in the ignition lock cylinder and that its key positions align with markings on housing. If the ignition lock cylinder is defective, the entire steering column lock assembly must be replaced. To replace, follow steps to access the ignition switch. The ignition lock cylinder cannot be replaced by itself: the whole housing must be replaced. Remove shear-head bolts retaining ignition switch/ignition lock cylinder assembly and separate bracket halves from the steering column. This can be done by drilling a hole in each bolt's center and removing them with screw extractors. Put new switch assembly into place, install shear-head bolts as well as tightening them until they snap at their heads. Finally, make sure you center the airbag clock spring when you are installing a steering wheel where it was removed.