Genuine Nissan Hardbody Pickup (D21U) Coolant Reservoir Cap

Coolant Overflow Reservoir Cap

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Model

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir Cap found

View related parts
Nissan Hardbody Pickup (D21U) Cap Reserve Tank
Part Number: 21712-50M01
$7.71 MSRP: $10.89
You Save: $3.18 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap-Reservoir Tank; Cap, Reservoir Assembly Cap, Reservoir Cap
- Replaces: 21712-50M00, 21712-F4100
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1997 Nissan Hardbody Pickup (D21U) | Long Body SE, Long Body XE, SE, Short Body XE, STD, XE | 4 Cyl 2.4L, 6 Cyl 3.0L | KA24E, VG30E

Nissan Hardbody Pickup (D21U) Coolant Reservoir Cap

The Nissan Hardbody Pickup (D21U) Coolant Reservoir Cap tightly locks to keep system pressure for reliable temperature control when the truck is stressed. As a design built to match every version of the Hardbody Pickup (D21U) produced during 1986-1997, this Coolant Reservoir Cap seals pressurized antifreeze in and corrosive air out to protect hoses, radiators, and gaskets. All Nissan owners are after components that don't quit, and this Coolant Reservoir Cap proves to be no different for the entire Hardbody Pickup (D21U). Both the 4x2 and 4x4 versions of the Nissan Hardbody Pickup (D21U) have the same purpose: managing the expansion and recovery of the coolant so that the circuit is filled up when needed and there is no spillage. A properly fitted cap protects against slippery ethylene glycol from leaking onto the pavement. Consequently, it enhances road safety while preventing environmental damage. Nissan tested the Hardbody Pickup (D21U) design on a pressure valve extensively. Later, this design is leak-free. There are two tough build options, a lightweight molded plastic lid and a traditional metal lid, but both fit the Hardbody Pickup (D21U) reservoir neck precisely with identical pressure ratings for consistent performance. The cap blocks dirt, rust flakes, and debris to safeguard engine passages and allow the cooling pump to run freely for smoother operation for your Nissan and prolonged service life. Nissan specified the same sealing specs for the early carbureted models and the later OBD-II compliant trucks, allowing a single Coolant Reservoir Cap to fit all model years. The Coolant Reservoir Cap is uncomplicated to fit, cheap, and has been tried over millions of miles. It is, therefore, a proven component that can make a big difference in efficiency and reliability and give you confidence through every mile in your Nissan Hardbody Pickup (D21U). The Coolant Reservoir Cap is essential for maintaining optimal engine performance.

If you need any OEM Nissan Hardbody Pickup (D21U) Coolant Reservoir Cap, feel free to choose them out of our huge selection of genuine Nissan Hardbody Pickup (D21U) Coolant Reservoir Cap. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.