How should you properly lubricate and maintain the Nissan Juke's Door Hinge, Door Latch Assembly, Door Lock, Hood Hinge, Hood Latch, Tailgate Lock and Trunk Latch?

Work around the vehicle, lubricating the hinges of the bonnet, doors, and tailgate or boot lid with a light machine oil. Lightly lubricate the bonnet release mechanism and the exposed sections of the inner cable with a smear of grease, and similarly lubricate the tailgate and fuel filler flap release mechanisms where accessible. Carefully check the security and operation of all hinges, latches, and locks, adjusting them as needed, and verify the operation of the central locking system. Additionally, assess the condition and operation of the tailgate struts, renewing them if either is leaking or unable to support the tailgate securely when raised.

Genuine Nissan Juke Door Hinge

Interior Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Door Hinges found

View related parts
Nissan Juke Front Door Hinge Assembly
Part Number: 82421-1KA0A
$52.43 MSRP: $78.85
You Save: $26.42 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assy-Front Door,Lower LH; Lower Hinge, Upper Hinge
- Position: Front
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2017 Nissan Juke | Base, Luxury, Nismo, Nismors, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Front Door Hinge Assembly
Part Number: 82420-1KA0A
$53.26 MSRP: $80.09
You Save: $26.83 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assy-Front Door,Lower RH; Lower Hinge, Upper Hinge
- Position: Front
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2017 Nissan Juke | Base, Luxury, Nismo, Nismors, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Hinge-Rear Door
Part Number: 82401-1KA0A
$46.35 MSRP: $69.71
You Save: $23.36 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assy-Rear Door,Upper LH; Upper Hinge
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2017 Nissan Juke | Base, Luxury, Nismo, Nismors, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Back Door Hinge Assembly
Part Number: 90400-1KA0A
$48.00 MSRP: $72.13
You Save: $24.13 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assy-Back Door. This item subject to a 40% restocking fee if returned.; Hinge
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2017 Nissan Juke | Base, Luxury, Nismo, Nismors, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke HNGE Rear Door Up
Part Number: 82400-1KA0A
$49.62 MSRP: $74.62
You Save: $25.00 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assy-Rear Door,Upper RH; Upper Hinge
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2017 Nissan Juke | Base, Luxury, Nismo, Nismors, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT

Nissan Juke Door Hinge

The hinge which is attached to the front or rear door of the car body to help it open and close and take the full weight of the door is the Nissan Juke Door Hinge. Each Door Hinge features a hardened steel pin that pivots within brass bushings, providing a smooth rotational axis while maintaining alignment between the latch and striker. The Nissan door uses a simple mechanism to keep it level so that the Juke door can be shut. After thousands of cycles, the pin and bushings may wear sufficiently to loosen, causing the Door Hinge to sag and the door to drop, misalign, and require a slam. The worn pin and bushings can be replaced to restore the correct geometry and eliminate unnecessary stresses on the latch components. This restores normal functioning without changing the entire Door Hinge. Earlier designs applied to incorporate open position stops within the hinge. However, more recent vehicles like the Nissan Juke utilize a separate door check strap. Consequently, the Door Hinge's only job is to pivot and support. Proper lubrication extends the lifespan of the hinge of Nissan Juke.

If you need any OEM Nissan Juke Door Hinge, feel free to choose them out of our huge selection of genuine Nissan Juke Door Hinge. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Juke Door Hinge Parts Questions & Experts Answers

Front Door Hinge Assembly
82421-1KA0A
Q: How should you properly lubricate and maintain the Nissan Juke's Door Hinge, Door Latch Assembly, Door Lock, Hood Hinge, Hood Latch, Tailgate Lock and Trunk Latch?
A:
Work around the vehicle, lubricating the hinges of the bonnet, doors, and tailgate or boot lid with a light machine oil. Lightly lubricate the bonnet release mechanism and the exposed sections of the inner cable with a smear of grease, and similarly lubricate the tailgate and fuel filler flap release mechanisms where accessible. Carefully check the security and operation of all hinges, latches, and locks, adjusting them as needed, and verify the operation of the central locking system. Additionally, assess the condition and operation of the tailgate struts, renewing them if either is leaking or unable to support the tailgate securely when raised.