How to remove and install the solenoid valve and EVAP canister on Nissan Murano?

On prime of the engine is where the solenoid valve is fixed. Two hoses from the solenoid valve should be removed. Solenoid valve's electrical connector has to be disconnected. After that, remove mounting bolts and then remove valve. Install in reverse order of removal. The vehicle must be locked onto jack stands, jacked up and supported in a safe manner. Remove the mounting nut by disconnecting canister. Open hoses from canister. Take out the EVAP control system pressure sensor by pulling it out from the canister. When changing sensor, change O-ring first. EVAP Canister Vent Control Valve is released by turning counterclockwise and pulling upward slightly. However, before replacing the vent valve, replace O-ring first. Installation is reverse of removal.

Genuine Nissan Murano Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Vapor Canisters found

View related parts
Nissan Murano Evaporative Emission Canister
Part Number: 14950-7Y00B
$277.43 MSRP: $391.85
You Save: $114.42 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 14950-7Y00C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2015-2019 Nissan Murano | Platinum, S, SL, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano CANISTER Assembly E
Part Number: 14950-CA00A
$364.83 MSRP: $515.30
You Save: $150.47 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporative Emission Canister; Filter, Vapor Canister
- Replaces: 14950-CA000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2014 Nissan Murano | LE, LE/ROOF, S, SE, SL, SL/ROOF, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano CANISTER Assembly-EVAPORATION
Part Number: 14950-CA000
$364.83 MSRP: $515.30
You Save: $150.47 (30%)
ADD TO CART
Product Specifications
- Other Name: Evaporative Emission Canister
- Replaced by: 14950-CA00A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2007 Nissan Murano | S, SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Evaporative Emission Canister
Part Number: 14950-7Y00A
$277.43 MSRP: $391.85
You Save: $114.42 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 14950-7Y00C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2015-2016 Nissan Murano | Platinum, S, SL, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano CANISTER Assembly E
Part Number: 14950-9J30A
$278.31 MSRP: $393.10
You Save: $114.79 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporative Emission Canister; Vapor Canister
- Replaces: 14950-9J300
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2017 Nissan Murano | Platinum, SL, SV | 4 Cyl 2.5L | QR25DER
View related parts
Nissan Murano Evaporative Emission Canister
Part Number: 14950-9UH0A
$341.76 MSRP: $482.72
You Save: $140.96 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2021-2024 Nissan Murano | Midnight Edition, Platinum, S, SL, SV | 6 Cyl 3.5 L GAS
View related parts
Nissan Murano CANISTER Assembly EVAP
Part Number: 14950-7Y00C
$277.43 MSRP: $391.85
You Save: $114.42 (30%)
Product Specifications
- Other Name: Vapor Canister
- Replaces: 14950-4BA0A, 14950-7Y000, 14950-7Y00A, 14950-7Y00B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2015-2020 Nissan Murano | Platinum, S, SL, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | VQ35DE

Nissan Murano Vapor Canister

If you need any OEM Nissan Murano Vapor Canister, feel free to choose them out of our huge selection of genuine Nissan Murano Vapor Canister. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Murano Vapor Canister Parts Questions & Experts Answers

CANISTER Assembly E
14950-CA00A
Q: How to remove and install the solenoid valve and EVAP canister on Nissan Murano?
A:
On prime of the engine is where the solenoid valve is fixed. Two hoses from the solenoid valve should be removed. Solenoid valve's electrical connector has to be disconnected. After that, remove mounting bolts and then remove valve. Install in reverse order of removal. The vehicle must be locked onto jack stands, jacked up and supported in a safe manner. Remove the mounting nut by disconnecting canister. Open hoses from canister. Take out the EVAP control system pressure sensor by pulling it out from the canister. When changing sensor, change O-ring first. EVAP Canister Vent Control Valve is released by turning counterclockwise and pulling upward slightly. However, before replacing the vent valve, replace O-ring first. Installation is reverse of removal.