How to service valves, valve seats, and valve guides on Nissan Pathfinder?

Servicing valves, valve seats and valve guides often referred to as a valve job must be done by a professional due to the complexity of the process and use of specialised tools. On the other hand, the heads can be removed and disassembled by a home mechanic, who will then carry out an initial cleaning and inspection before reassembling and taking them to an automotive machine shop for further work. Therefore, this examination helps determine how fit the cylinder head and valve train components are as well as what kind of repairs and new parts are necessary when one goes to an auto machine shop. The valves and springs will then be removed by the machine shop while at it they will work on the valves or replace those that are worn out or pitted, replace the valve guides that could have gone bad, check out on the spring retainers, valve stem keepers, and even replace some of these parts like the valve seals with new ones; finally they should fix all these back together making sure that proper installed spring height is achieved. Also if warped, the cylinder head gasket surface will be re-surfaced. Consequently, after being serviced through a professional valve job thereby leaving it almost like new in condition. Upon returning, it should also be washed again so that all metal particles or abrasive grit can be removed from it which may still remain from a recent cylinder head resurfacing or any valve service operation. Finally if possible blow air through all oil holes and passages using compressed air.

Genuine Nissan Pathfinder Intake Valve

Engine Intake Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Intake Valves found

View related parts
Nissan Pathfinder Valve Intake
Part Number: 13201-3KY0A
$10.25 MSRP: $14.13
You Save: $3.88 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake
- Replaced by: 13201-5JJ0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2014 Nissan Pathfinder | Platinum, SL, SV | 4 Cyl 2.5L | QR25DER
View related parts
Nissan Pathfinder Valve Intake
Part Number: 13201-6KA0A
$14.47 MSRP: $19.95
You Save: $5.48 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Manufacturer Note: INTAKE
- Replaced by: 13201-6KA0B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2022 Nissan Pathfinder
- 2016-2020 Nissan Pathfinder | Platinum, S, SL, SV | 6 Cyl 3.5L | VQ35DD
View related parts
Nissan Pathfinder Valve Intake
Part Number: 13201-4W001
$31.06 MSRP: $42.82
You Save: $11.76 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Replaces: 13201-4W000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2004 Nissan Pathfinder | LE, SE, XE | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Pathfinder Valve Intake
Part Number: 13201-9HP0A
$10.77 MSRP: $14.85
You Save: $4.08 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2017 Nissan Pathfinder | Platinum, S, SL, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Pathfinder Valve-Intake
Part Number: 13201-V7100
$10.84 MSRP: $14.95
You Save: $4.11 (28%)
ADD TO CART
Limited Availability
Product Specifications
- Manufacturer Note: MITSUBISHI
- Replaced by: 13201-V5202
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1996-2003 Nissan Pathfinder | LE, SE, XE | 6 Cyl 3.3L | VG33E
- 1992-1994 Nissan Pathfinder | SE, ST, XE | 6 Cyl 3.0L | VG30E
View related parts
Nissan Pathfinder Valve-Intake
Part Number: 13201-4W000
$31.06 MSRP: $42.82
You Save: $11.76 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 13201-4W001
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2003 Nissan Pathfinder | LE, SE, XE | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Pathfinder Valve-Intake
Part Number: 13201-V5202
$10.84 MSRP: $14.95
You Save: $4.11 (28%)
Product Specifications
- Other Name: Intake Valve
- Manufacturer Note: FUJI VALVE
- Replaces: 13201-V7100
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1987-2003 Nissan Pathfinder | LE, SE, ST, XE | 6 Cyl 3.0L, 6 Cyl 3.3L | VG30E, VG30I, VG33E
View related parts
Nissan Pathfinder Valve-Intake
Part Number: 13201-7S000
Product Specifications
- Other Name: Intake Valve
- Manufacturer Note: STD FUEL
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2012 Nissan Pathfinder | LE, S, SE, SE Off-Road, Silver Edition, SV, XE | 6 Cyl 4.0L, 8 Cyl 5.6L | VK56DE, VQ40DE
View related parts
Nissan Pathfinder Valve-Intake
Part Number: 13201-9N00A
Product Specifications
- Other Name: Intake Valve
- Replaces: 13201-JA10A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2014 Nissan Pathfinder | Platinum, S, SL, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Pathfinder Valve-Intake
Part Number: 13201-N8501
Product Specifications
- Other Name: Intake Valve
- Replaces: 13201-N8500
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1987-1990 Nissan Pathfinder | DX | 4 Cyl 2.4L | Z24I

Nissan Pathfinder Intake Valve

The Nissan Pathfinder Intake Valve appears as an intensely important part that plays a huge role in contributing to Nissan's impressive array of SUV vehicles. The Intake Valve is primarily applied in controlling when the mixture of air and fuel is admitted into the engine, the right and efficient mixture will determine the power output and general efficiency of any engine. Through the years, the Nissan Pathfinder has passed through several generations which possesses the R50, R51, R52 and the new R53 models in which the Intake Valve designs employed are unique in conformity with new performance requirements. It is for this reason that the adaptability of this system makes it compatible with several Pathfinder models, offering the drivers the optimal of efficiency and safety. Nissan Pathfinder Intake Valve is made from quality materials that enhance its reliability, flexibility that determines engine working condition. Intake Valve replacement must be done on time because, it has negative impacts on combustion and reduced performance hence the need to have it replaced on time so as to improve on its performance. More so, it has aspects of the Intake Valve that differ with other models in the automotive market to help in the designing of better airflow and combustion efficiency. Being an important part of the Nissan Pathfinder car model, the Nissan Pathfinder Intake Valve is confident of its reliability and performance that greatly promotes the efficiency and safety aspect when driving, thus complementing the Nissan company's advancement in engineering the Pathfinder model.

If you need any OEM Nissan Pathfinder Intake Valve, feel free to choose them out of our huge selection of genuine Nissan Pathfinder Intake Valve. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Pathfinder Intake Valve Parts Questions & Experts Answers

Valve Intake
13201-4W001
Q: How to service valves, valve seats, and valve guides on Nissan Pathfinder?
A:
Servicing valves, valve seats and valve guides often referred to as a valve job must be done by a professional due to the complexity of the process and use of specialised tools. On the other hand, the heads can be removed and disassembled by a home mechanic, who will then carry out an initial cleaning and inspection before reassembling and taking them to an automotive machine shop for further work. Therefore, this examination helps determine how fit the cylinder head and valve train components are as well as what kind of repairs and new parts are necessary when one goes to an auto machine shop. The valves and springs will then be removed by the machine shop while at it they will work on the valves or replace those that are worn out or pitted, replace the valve guides that could have gone bad, check out on the spring retainers, valve stem keepers, and even replace some of these parts like the valve seals with new ones; finally they should fix all these back together making sure that proper installed spring height is achieved. Also if warped, the cylinder head gasket surface will be re-surfaced. Consequently, after being serviced through a professional valve job thereby leaving it almost like new in condition. Upon returning, it should also be washed again so that all metal particles or abrasive grit can be removed from it which may still remain from a recent cylinder head resurfacing or any valve service operation. Finally if possible blow air through all oil holes and passages using compressed air.