How to remove and install the front Sway Bar Bushing, Sway Bar Kit, and Sway Bar Link on a Nissan Titan?

On Armada models equipped with a rear auto-leveling suspension, turn the ignition key to the OFF position before raising the vehicle. Raise the vehicle and support it securely on jackstands. Remove the engine splash shield as necessary. Remove the nuts from the sway bar link and detach the links from the Sway Bar Kit (Front sway bar link nuts). Be sure to keep the parts for the left and right sides separate. Remove the sway bar bracket bolts (Front sway bar bracket bolts). Remove the sway bar. Remove the Sway Bar Bushing. Inspect all parts for wear and damage, replacing them as necessary. Installation is the reverse of removal. Be sure to tighten all fasteners.

Genuine Nissan Titan Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Sway Bar Links found

View related parts
Nissan Titan Stabilizer Connecting Rod Assembly
Part Number: 54618-7S000
$64.29 MSRP: $90.80
You Save: $26.51 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assy-Connecting,Stabilizer; Link, Stabilizer Link
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2015 Nissan Titan | LE, Off-Road, PRO-4X, S, SE, SL, SV, XE | 8 Cyl 5.6L | VK56DE
View related parts
Nissan Titan Rod Assembly-Connecting, STABILIZER
Part Number: 54618-EZ00A
$70.26 MSRP: $99.23
You Save: $28.97 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assy-Connecting,Stabilizer; Link, Stabilizer Link
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2024 Nissan Titan | Platinum, Platinum Reserve, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.6 L GAS, 8 Cyl 5.6L | VK56VD
View related parts
Nissan Titan Rod Assembly-Connecting, STABILIZER
Part Number: 54618-EZ60A
$99.04 MSRP: $139.89
You Save: $40.85 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assy-Connecting,Stabilizer; Link, Stabilizer Link
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2024 Nissan Titan | Platinum, Platinum Reserve, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.0 L DIESEL, 8 Cyl 5.0L Diesel, 8 Cyl 5.6 L GAS, 8 Cyl 5.6L | CEV8D1, VK56VD
View related parts
Nissan Titan Rear Stabilizer Connecting Rod
Part Number: 56261-EZ50A
$37.54 MSRP: $51.75
You Save: $14.21 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod-Connecting,Rear Stabilizer; Link, Stabilizer Link
- Position: Rear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2024 Nissan Titan | Platinum, Platinum Reserve, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.0 L DIESEL, 8 Cyl 5.0L Diesel, 8 Cyl 5.6 L GAS, 8 Cyl 5.6L | CEV8D1, VK56VD
View related parts
Nissan Titan Stabilizer Connecting Rod Assembly
Part Number: 54668-EZ60A
$89.50 MSRP: $126.42
You Save: $36.92 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assy-Connecting,Stabilizer; Link, Stabilizer Link
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2024 Nissan Titan | Platinum, Platinum Reserve, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.0 L DIESEL, 8 Cyl 5.0L Diesel, 8 Cyl 5.6 L GAS, 8 Cyl 5.6L | CEV8D1, VK56VD
View related parts
Nissan Titan Rod Assembly-Connecting, STABILIZER
Part Number: 54618-EZ10A
$107.50 MSRP: $151.84
You Save: $44.34 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assy-Connecting,Stabilizer; Link, Stabilizer Link
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2024 Nissan Titan | Platinum, Platinum Reserve, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.6 L GAS, 8 Cyl 5.6L | VK56VD

Nissan Titan Sway Bar Link

Sway Bar Links connect the sway bar to a suspension component, allowing the sway bar to counter excessive body roll when cornering. The Sway Bar Link is located between your sway bar and your control arm. This component transfers motion from one side of your vehicle to the other so that your wheel assemblies do not act entirely independently. The Sway Bar Link resists the greater compression that takes place on outside wheels during cornering, thus helping to keep the body level. This allows for greater tire contact and more predictable steering. The link helps to smooth out movement transmitted from the control arm to the bar, which increases ride comfort when the road surface isn't perfect. The design of the Sway Bar Link matches the weight distribution of the Nissan Titan. A properly functioning Sway Bar Link is therefore essential in providing balance in handling, traction, and overall stability of the Nissan Titan. The same Sway Bar Link function is common for every Nissan Titan because the suspension layout described is the same for all factory setups referenced.

If you need any OEM Nissan Titan Sway Bar Link, feel free to choose them out of our huge selection of genuine Nissan Titan Sway Bar Link. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Titan Sway Bar Link Parts Questions & Experts Answers

Stabilizer Connecting Rod Assembly
54618-7S000
Q: How to remove and install the front Sway Bar Bushing, Sway Bar Kit, and Sway Bar Link on a Nissan Titan?
A:
On Armada models equipped with a rear auto-leveling suspension, turn the ignition key to the OFF position before raising the vehicle. Raise the vehicle and support it securely on jackstands. Remove the engine splash shield as necessary. Remove the nuts from the sway bar link and detach the links from the Sway Bar Kit (Front sway bar link nuts). Be sure to keep the parts for the left and right sides separate. Remove the sway bar bracket bolts (Front sway bar bracket bolts). Remove the sway bar. Remove the Sway Bar Bushing. Inspect all parts for wear and damage, replacing them as necessary. Installation is the reverse of removal. Be sure to tighten all fasteners.