How to replace the ignition lock cylinder and ignition switch on the Nissan Xterra?

The negative battery terminal cable needs to be unplugged. Take off the knee bolster and steering column covers. After that, track the wiring harness from the ignition switch down the column to disconnect the ignition switch electrical connector. The key should be inserted and continuity checked between indicated terminals of the connector at each position on the ignition switch. Replace if different from specified continuity. Also, verify that there is no wear or looseness in the ignition lock cylinder and that its key positions align with markings on housing. If the ignition lock cylinder is defective, the entire steering column lock assembly must be replaced. To replace, follow steps to access the ignition switch. The ignition lock cylinder cannot be replaced by itself: the whole housing must be replaced. Remove shear-head bolts retaining ignition switch/ignition lock cylinder assembly and separate bracket halves from the steering column. This can be done by drilling a hole in each bolt's center and removing them with screw extractors. Put new switch assembly into place, install shear-head bolts as well as tightening them until they snap at their heads. Finally, make sure you center the airbag clock spring when you are installing a steering wheel where it was removed.

Genuine Nissan Xterra Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

30 Ignition Lock Cylinders found

View related parts
Nissan Xterra Frame Assembly-Steering Lock
Part Number: D8701-EA00A
$139.42 MSRP: $196.92
You Save: $57.50 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Lock Cylinder, Steering Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2011 Nissan Xterra | Base Camp, Off-Road, PRO-4X, S, SE, X | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Xterra Steering Lock Set
Part Number: D8700-4S100
$186.26 MSRP: $263.08
You Save: $76.82 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Set-Steering; Ignition Lock Cylinder, Lock, Lock Assembly
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2004 Nissan Xterra | SE, XE | 6 Cyl 3.3L | VG33E, VG33ER
View related parts
Nissan Xterra Steering Lock Set
Part Number: D8700-5Z000
$255.41 MSRP: $360.75
You Save: $105.34 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Set-Steering
- Replaced by: D8700-5Z00J
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2015 Nissan Xterra | Base Camp, Off-Road, PRO-4X, S, SE, X | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Xterra Cylinder Lock Key Set
Part Number: 99810-9CA1A
$170.12 MSRP: $262.13
You Save: $92.01 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Set-Cylinder Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2015 Nissan Xterra | Base Camp, Off-Road, PRO-4X, S, X | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Xterra Frame Assembly-Steering Lock
Part Number: D8701-EA010
$208.57 MSRP: $294.58
You Save: $86.01 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Lock Cylinder, Steering Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2011 Nissan Xterra | Base Camp, Off-Road, PRO-4X, S | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Xterra Steering Lock Set
Part Number: D8700-EA010
$249.23 MSRP: $352.02
You Save: $102.79 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Set-Steering; Cylinder & Keys, Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2015 Nissan Xterra | Base Camp, Off-Road, PRO-4X, S, SE | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Xterra Cylinder Lock Key Set
Part Number: 99810-ZP35A
$95.25 MSRP: $146.76
You Save: $51.51 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Set-Cylinder Lock
- Replaces: 99810-ZP33A, K9810-ZP33A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2012 Nissan Xterra | Base Camp, Off-Road, PRO-4X, S | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Xterra Cylinder Lock Key Set
Part Number: 99810-9CA2A
$168.51 MSRP: $253.20
You Save: $84.69 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Set-Cylinder Lock. This item subject to a 40% restocking fee if returned.
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2015 Nissan Xterra | Off-Road, PRO-4X, S | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Xterra Cylinder Lock Key Set
Part Number: 99810-ZP35D
$59.65 MSRP: $84.25
You Save: $24.60 (30%)
ADD TO CART
Limited Availability
Product Specifications
- Other Name: Key Set-Cylinder Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2007-2008 Nissan Xterra | Base Camp, S | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Xterra Frame Assembly-Steering Lock
Part Number: 48701-EA00A
$281.26 MSRP: $364.47
You Save: $83.21 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 48701-EA00B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2007-2015 Nissan Xterra | Base Camp, Off-Road, PRO-4X, S, SE, X | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Xterra Frame Assembly-Steering Lock
Part Number: 48701-EA010
$165.85 MSRP: $234.25
You Save: $68.40 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Lock Cylinder, Steering Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2007-2015 Nissan Xterra | Base Camp, Off-Road, PRO-4X, S | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Xterra Cylinder Lock Key Set
Part Number: K9810-2Z700
$53.36 MSRP: $103.37
You Save: $50.01 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Set-Cylinder LOCK. This item subject to a 40% restocking fee if returned.; Lock Set
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2002-2004 Nissan Xterra | SE, XE | 4 Cyl 2.4L, 6 Cyl 3.3L | KA24DE, VG33E, VG33ER
View related parts
Nissan Xterra Cylinder Lock Key Set
Part Number: K9810-ZP33A
$95.25 MSRP: $146.76
You Save: $51.51 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Set-Cylinder Lock
- Replaced by: 99810-ZP35A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2007 Nissan Xterra | Base Camp, Off-Road, S | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Xterra Cylinder Lock Key Set
Part Number: K9810-7Z000
$89.59 MSRP: $126.53
You Save: $36.94 (30%)
Product Specifications
- Other Name: Key Set-Cylinder Lock; Lock Set
- Replaces: K9810-7Z005
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2002 Nissan Xterra | SE, XE | 4 Cyl 2.4L, 6 Cyl 3.3L | KA24DE, VG33E
View related parts
Nissan Xterra Cylinder Lock Key Set
Part Number: 99810-ZP34D
Product Specifications
- Other Name: Key Set-Cylinder Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2007-2008 Nissan Xterra | Base Camp, S | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Xterra Key Set Cylinder Lock
Part Number: K9810-2Z701
Product Specifications
- Other Name: Key Set-Cylinder Lock; Lock Set
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2002-2004 Nissan Xterra | SE, XE | 6 Cyl 3.3L | VG33E, VG33ER
View related parts
Nissan Xterra Cylinder Lock Key Set
Part Number: 99810-ZP34C
Product Specifications
- Other Name: Key Set-Cylinder Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2006-2008 Nissan Xterra | Base Camp, S | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Xterra Cylinder Lock Key Set
Part Number: 99810-ZP35C
Product Specifications
- Other Name: Key Set-Cylinder LOCK
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2006-2008 Nissan Xterra | Base Camp, S | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Xterra Cylinder Lock Key Set
Part Number: K9810-7Z100
Product Specifications
- Other Name: Key Set-Cylinder Lock; Lock Set
- Replaces: K9810-7Z105
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2002 Nissan Xterra | SE, XE | 6 Cyl 3.3L | VG33E
View related parts
Nissan Xterra Cylinder Lock Key Set
Part Number: K9810-7Z800
Product Specifications
- Other Name: Key Set-Cylinder Lock; Lock Set
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2001-2003 Nissan Xterra | SE, XE | 4 Cyl 2.4L, 6 Cyl 3.3L | KA24DE, VG33E, VG33ER

| Page 1 of 2 |Next >

1-20 of 30 Results

Nissan Xterra Ignition Lock Cylinder

Nissan Xterra Ignition Lock Cylinder allows the driver to activate the car by inserting a key into the steering column and turning it. This Ignition Lock Cylinder with tumblers which fits in Xterra is the key; when the key is turned to the start position it allows the ignition switch to pass current to the starter, ignition and fuel injection wiring and start the engine in a Nissan Xterra. When the Ignition Lock Cylinder is switched to on position it continues to supply power to the engine and components, but the acc position allows the components to operate without the engine. The off position cuts power and the lock position allows the key to be removed, secures the steering column and activates a shift interlock which holds a transmission in park. A coded key system operates via the Ignition Lock Cylinder in a way that the engine is only started after the right electronic code has been identified, which helps prevent theft. Wear at keys, tumblers or switch contacts in Ignition Lock Cylinder may result in hard turning, electrical loss, stalling or no-start behavior of an affected Nissan Xterra, and hence Nissan operation is contingent on its functionality.

If you need any OEM Nissan Xterra Ignition Lock Cylinder, feel free to choose them out of our huge selection of genuine Nissan Xterra Ignition Lock Cylinder. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Xterra Ignition Lock Cylinder Parts Questions & Experts Answers

Steering Lock Set
D8700-3S510
Q: How to replace the ignition lock cylinder and ignition switch on the Nissan Xterra?
A:
The negative battery terminal cable needs to be unplugged. Take off the knee bolster and steering column covers. After that, track the wiring harness from the ignition switch down the column to disconnect the ignition switch electrical connector. The key should be inserted and continuity checked between indicated terminals of the connector at each position on the ignition switch. Replace if different from specified continuity. Also, verify that there is no wear or looseness in the ignition lock cylinder and that its key positions align with markings on housing. If the ignition lock cylinder is defective, the entire steering column lock assembly must be replaced. To replace, follow steps to access the ignition switch. The ignition lock cylinder cannot be replaced by itself: the whole housing must be replaced. Remove shear-head bolts retaining ignition switch/ignition lock cylinder assembly and separate bracket halves from the steering column. This can be done by drilling a hole in each bolt's center and removing them with screw extractors. Put new switch assembly into place, install shear-head bolts as well as tightening them until they snap at their heads. Finally, make sure you center the airbag clock spring when you are installing a steering wheel where it was removed.

Related Nissan Xterra Parts

Browse by Year

2015 Ignition Lock Cylinder 2014 Ignition Lock Cylinder 2013 Ignition Lock Cylinder 2012 Ignition Lock Cylinder 2011 Ignition Lock Cylinder 2010 Ignition Lock Cylinder 2009 Ignition Lock Cylinder 2008 Ignition Lock Cylinder 2007 Ignition Lock Cylinder 2006 Ignition Lock Cylinder 2005 Ignition Lock Cylinder 2004 Ignition Lock Cylinder 2003 Ignition Lock Cylinder 2002 Ignition Lock Cylinder 2001 Ignition Lock Cylinder 2000 Ignition Lock Cylinder