Nissan 12303-7Y000 Crankshaft Pulley

Disconnect the negative cable from the battery, raise the front of the vehicle, remove the right front wheel, and secure the vehicle on jackstands. Remove the drivebelts. Take off the right front wheel and the inner splash shield from the right fenderwell. Use a strap wrench around the crankshaft pulley to hold it while employing a breaker bar and socket to remove the crankshaft pulley center bolt; a chain-type wrench may be used if an old drivebelt is wrapped around the crankshaft pulley first. Wedge a prybar or two screwdrivers behind the crankshaft pulley and carefully pry it off the crankshaft; if the pulley is difficult to remove, utilize a bolt-type puller. Installation is the reverse of removal.