How to remove and install the crankshaft pulley on Nissan Maxima with SOHC engine?

Disconnect the negative cable from the battery, raise the front of the vehicle, remove the right front wheel, and secure the vehicle on jackstands. Remove the drivebelts. Take off the right front wheel and the inner splash shield from the right fenderwell. Use a strap wrench around the crankshaft pulley to hold it while employing a breaker bar and socket to remove the crankshaft pulley center bolt; a chain-type wrench may be used if an old drivebelt is wrapped around the crankshaft pulley first. Wedge a prybar or two screwdrivers behind the crankshaft pulley and carefully pry it off the crankshaft; if the pulley is difficult to remove, utilize a bolt-type puller. Installation is the reverse of removal.

How to properly remove and reinstall the crankshaft pulley, ensuring correct alignment, use of the Woodruff key, and torque settings during the process on 1.6L petrol Nissan Juke?

To remove the auxiliary drivebelt, first, position No 1 cylinder at TDC on its compression stroke if necessary. To prevent crankshaft rotation while unscrewing the pulley bolt, hold the pulley with a suitable tool that locates in the slots to prevent it from turning; if unavailable, select top gear and have an assistant apply the brakes firmly. Unscrew the pulley bolt and its washer, then remove the pulley from the crankshaft. If the pulley is a tight fit, use a puller to withdraw it by refitting the pulley bolt and leaving it approximately 5mm out from the pulley face, then tighten the puller's center bolt to extract the pulley. If the Woodruff key is loose in the crankshaft, remove and store it with the pulley. For refitting, place the Woodruff key back, align the crankshaft pulley groove with the key, and slide the sprocket onto the crankshaft. Lubricate the bolt head and threads with new engine oil, then refit the retaining bolt and washer. Lock the crankshaft as done during removal and tighten the pulley retaining bolt to the specified torque settings. For the final tightening stage, paint marks on the bolt head and pulley to indicate a 60° turn; tighten until the marks align. Finally, refit and adjust the auxiliary drivebelt.

Genuine Nissan Crankshaft Pulley

Crankshaft Pulley Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

187 Crankshaft Pulleys found

View related parts
Nissan Sprocket-Crankshaft
Part Number: 13021-AL51A
$42.27 MSRP: $58.27
You Save: $16.00 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear
- Replaces: 13021-JN01A, 13021-JK20A, 13021-AL500
Fits the following Nissan Models:
- 350Z | 2003-2008 | 350Z, Base, Enthusiast, GT, Touring, Track | 6 Cyl 3.5L
- 370Z | 2009-2020 | 40th Anniversary Edition, Base, Base Sport, Heritage Edition, Nismo, Nismo Tech, Sport, Sport Tech, Sport Touring, Touring, Touring Sport | 6 Cyl 3.7 L GAS, 6 Cyl 3.7L
- Altima | 2014-2018, 2002-2004 | S, SE, SL, SR, SV, Tech | 6 Cyl 3.5L
- Maxima | 2016-2023, 2001-2003 | 40th Anniversary Edition, GLE, GXE, GXEL, Platinum, Platinum Reserve, S, SE, SEL, SES, SL, SR, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L
- Murano | 2003-2024 | CrossCabriolet, LE, LE/ROOF, Midnight Edition, Platinum, S, SE, SL, SL/ROOF, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L
- Pathfinder | 2014-2017 | Platinum, S, SL, SV | 6 Cyl 3.5L
- Quest | 2011-2017 | LE, S, SL, SV | 6 Cyl 3.5L
View More
View related parts
Nissan Sprocket-Crankshaft
Part Number: 13021-7Y000
$14.08 MSRP: $19.42
You Save: $5.34 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear
- Manufacturer Note: HITACHI FUNMATSU
Fits the following Nissan Models:
- Altima | 2003-2015 | S, SE, SE-R, SL, SR, SV, Tech | 6 Cyl 3.5L
- Frontier | 2005-2019 | LE, Off-Road, PRO-4X, S, SE, SL, SV | 6 Cyl 4.0L
- Maxima | 2004-2014 | LE, Premium, S, SE, SL, Sport, SR, SV | 6 Cyl 3.5L
- NV | 2012-2021 | S, S/Airbags, S/PWRABG, S/Power, SL, SV, SV/Airbags | 6 Cyl 4.0 L GAS, 6 Cyl 4.0L
- Pathfinder | 2005-2015 | LE, Platinum, S, SE, SE Off-Road, Silver Edition, SL, SV, XE | 6 Cyl 3.5L, 6 Cyl 4.0L
- Quest | 2004-2010 | Base, S, SE, SL | 6 Cyl 3.5L
- Xterra | 2005-2015 | Base Camp, Off-Road, PRO-4X, S, SE, X | 6 Cyl 4.0L
View More
View related parts
Nissan Sprocket-Crankshaft
Part Number: 13021-JF00A
$115.20 MSRP: $162.72
You Save: $47.52 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear
Fits the following Nissan Models:
- GT-R | 2023-2024, 2009-2021 | 50th Anniversary Edition, Base, Black Edition, Nismo, NismoPKG, Premium, Pure, Skyline Edition, T-spec, T-spec Takumi Edition, Track, Track Edition | 6 Cyl 3.8 L GAS, 6 Cyl 3.8L
View related parts
Nissan Sprocket-Crankshaft
Part Number: 13021-16V10
$79.50 MSRP: $112.28
You Save: $32.78 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear
Fits the following Nissan Models:
- 300ZX | 1990-1996 | GL, GLL | 6 Cyl 3.0L
View related parts
Nissan Crankshaft Pulley
Part Number: 12303-5S700
$468.52 MSRP: $661.75
You Save: $193.23 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft; Crankshaft Pulley, Pulley
Fits the following Nissan Models:
- Frontier | 2000-2004 | SC | 6 Cyl 3.3L
- Xterra | 2001-2004 | SE, XE | 6 Cyl 3.3L
View related parts
Nissan Sprocket-Crankshaft
Part Number: 13021-53J00
$38.11 MSRP: $52.53
You Save: $14.42 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear, Timing Gear Set
- Replaces: 13021-40F01
Fits the following Nissan Models:
- 200SX | 1995-1999 | SE, SE-R | 4 Cyl 2.0L
- 240SX | 1989-1998 | SE, STD | 4 Cyl 2.4L
- Altima | 1993-2001 | GLE, GXE, SE, XE | 4 Cyl 2.4L
- Axxess | 1989-1994 | SE, SGL | 4 Cyl 2.4L
- Frontier | 1998-2004 | SE, STD, XE | 4 Cyl 2.4L
- Hardbody Pickup (D21) | 1989-1994 | DX | 4 Cyl 2.4L
- Hardbody Pickup (D21U) | 1995-1997 | Long Body XE, SE, Short Body XE, STD, XE | 4 Cyl 2.4L
- Sentra | 1991-2002 | SE, SE-R, SR | 4 Cyl 2.0L
- Stanza | 1990-1997 | GLE, GXE, SE, XE, XE/SE | 4 Cyl 2.4L
- Xterra | 2000-2004 | XE | 4 Cyl 2.4L
View More
View related parts
Nissan Sprocket-Crankshaft
Part Number: 13021-0W000
$67.67 MSRP: $95.58
You Save: $27.91 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear, Sprocket, Timing Gear Set
- Manufacturer Note: MAKE USA 32 DIAMETER
Fits the following Nissan Models:
- Frontier | 1998-2004 | SC, SE, XE | 6 Cyl 3.3L
- Hardbody Pickup (D21U) | 1995-1997 | Long Body SE, Long Body XE | 6 Cyl 3.0L
- Pathfinder | 1996-2003 | LE, SE, XE | 6 Cyl 3.3L
- Quest | 1995-2003 | GXE, SE, XE | 6 Cyl 3.0L, 6 Cyl 3.3L
- Xterra | 2000-2004 | SE, XE | 6 Cyl 3.3L
View More
View related parts
Nissan Sprocket-Crankshaft
Part Number: 13021-1CA0A
$64.20 MSRP: $90.68
You Save: $26.48 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear
- Manufacturer Note: MADE IN JAPAN
- Replaces: 13021-AR00A, 13021-AR002
Fits the following Nissan Models:
- Armada | 2017 | Platinum, Platinum CP, SL, SV | 8 Cyl 5.6L
View related parts
Nissan Crankshaft Pulley
Part Number: 12303-JA00A
$87.76 MSRP: $123.95
You Save: $36.19 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft; Crankshaft Pulley, Pulley
- Replaced by: 12303-JA01A
Fits the following Nissan Models:
- Altima | 2006-2013 | Base, S, SL | 4 Cyl 2.5L
- Frontier | 2006-2013 | S, SE, SV, XE | 4 Cyl 2.5L
- Sentra | 2006-2012 | 2.5S, LE, SE-R, SE-R Spec V, Spec V | 4 Cyl 2.5L
View More
View related parts
Nissan Crankshaft Pulley
Part Number: 12303-JA11A
$343.10 MSRP: $484.60
You Save: $141.50 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft; Crankshaft Pulley, Pulley
- Replaced by: 12303-3WS0A
Fits the following Nissan Models:
- Altima | 2013-2018 | S, SL, SR, SV, Tech | 6 Cyl 3.5L
- Maxima | 2016-2019, 2011-2014 | LE, Platinum, Premium, S, SL, SR, SV, Sport | 6 Cyl 3.5L
- Murano | 2015-2019 | Platinum, S, SL, SV | 6 Cyl 3.5L
- Pathfinder | 2013-2019 | Platinum, S, SL, SV | 6 Cyl 3.5L
View More
View related parts
Nissan Sprocket-Crankshaft
Part Number: 13021-BV81A
$45.16 MSRP: $62.25
You Save: $17.09 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear
- Replaces: 13021-BV80A
Fits the following Nissan Models:
- Juke | 2014-2017 | Base, Luxury, Nismo, S, SL, SV, Upper | 4 Cyl 1.6L
- Sentra | 2016-2019 | FE, Nismo, S, SL, SR, SV | 4 Cyl 1.6L, 4 Cyl 1.8L
View related parts
Nissan Sprocket-Crankshaft
Part Number: 13021-1LU0A
$12.88 MSRP: $17.75
You Save: $4.87 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear
- Replaces: 13021-7S000
Fits the following Nissan Models:
- Armada | 2004-2015 | LE, LE/SL, Platinum, SE, SE/SV | 8 Cyl 5.6L
- NV | 2012-2018 | S, S/Airbags, S/Power, S/PWRABG, SL, SV, SV/Airbags | 8 Cyl 5.6L
- Pathfinder | 2007-2012 | LE, SE | 8 Cyl 5.6L
- Titan | 2004-2015 | LE, Off-Road, PRO-4X, S, SE, SL, SV, XE | 8 Cyl 5.6L
View More
View related parts
Nissan Crankshaft Pulley
Part Number: 12303-EN20C
$266.20 MSRP: $375.98
You Save: $109.78 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft; Crankshaft Pulley, Pulley
- Replaced by: 12303-CJ70A
Fits the following Nissan Models:
- Cube | 2009-2011 | 18, S, SL | 4 Cyl 1.8L
- NV | 2013-2019 | S, STD, SV | 4 Cyl 2.0L
- Sentra | 2007-2019 | 20, FE, S, SL, SR, SV | 4 Cyl 1.8L, 4 Cyl 2.0L
- Versa | 2007-2012 | S, SL | 4 Cyl 1.8L
View More
View related parts
Nissan Sprocket-Crankshaft
Part Number: 13021-CK83A
$24.36 MSRP: $33.58
You Save: $9.22 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear
- Manufacturer Note: MADE IN JPN
- Replaces: 13021-CK80A, 13021-EN200, 13021-CK81A, 13021-CK82A, 13021-EE50B, 13021-ET000
Fits the following Nissan Models:
- Cube | 2009-2014 | 18, S, SL | 4 Cyl 1.8L
- Juke | 2011-2017 | Base, Luxury, Nismo, Nismors, S, SL, SV, Upper | 4 Cyl 1.6L
- NV | 2013-2019 | S, STD, SV | 4 Cyl 2.0L
- Rogue | 2017-2019 | SL, SV | 4 Cyl 2.0L
- Rogue Sport | 2017-2021 | S, SL, SV | 4 Cyl 2.0 L GAS, 4 Cyl 2.0L
- Sentra | 2007-2014 | 20, FE, S, SL, SR, SV | 4 Cyl 1.8L, 4 Cyl 2.0L
- Versa | 2007-2012 | S, SL | 4 Cyl 1.8L
View More
View related parts
Nissan Crankshaft Pulley
Part Number: 12303-EA21B
$303.72 MSRP: $428.98
You Save: $125.26 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft; Crankshaft Pulley, Pulley
- Replaces: 12303-EA21A, 12303-EA200
Fits the following Nissan Models:
- Frontier | 2005-2019 | LE, Off-Road, PRO-4X, S, SE, SL, SV | 6 Cyl 4.0L
- NV | 2012-2021 | S, S/Airbags, S/PWRABG, S/Power, SL, SV, SV/Airbags | 6 Cyl 4.0 L GAS, 6 Cyl 4.0L
- Pathfinder | 2005-2012 | LE, S, SE, SE Off-Road, SV, Silver Edition, XE | 6 Cyl 4.0L
- Xterra | 2005-2015 | Base Camp, Off-Road, PRO-4X, S, SE, X | 6 Cyl 4.0L
View More
View related parts
Nissan Crankshaft Pulley
Part Number: 12303-0B100
$345.53 MSRP: $460.58
You Save: $115.05 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft. This item is non-returnable.
- Manufacturer Note: MAKE USA 25 DIAMETER
- Replaces: 12303-0B000
Fits the following Nissan Models:
- Quest | 1993-1996 | GXE, XE | 6 Cyl 3.0L
View related parts
Nissan Gear-CRANKSHAFT
Part Number: 13021-6KA0A
$61.55 MSRP: $86.93
You Save: $25.38 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sprocket-Crankshaft; Crankshaft Gear
Fits the following Nissan Models:
- Pathfinder | 2016-2020 | Platinum, S, SL, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L
View related parts
Nissan Crankshaft Pulley
Part Number: 12303-JK20A
$411.68 MSRP: $581.47
You Save: $169.79 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft; Crankshaft Pulley, Pulley
Fits the following Nissan Models:
- 350Z | 2006-2008 | 350Z, Enthusiast, GT, Touring, Track | 6 Cyl 3.5L
- 370Z | 2009-2020 | 40th Anniversary Edition, Base, Base Sport, Heritage Edition, Nismo, Nismo Tech, Sport, Sport Tech, Sport Touring, Touring, Touring Sport | 6 Cyl 3.7 L GAS, 6 Cyl 3.7L
View related parts
Nissan Sprocket-Crankshaft
Part Number: 13021-EZ30A
$69.17 MSRP: $97.70
You Save: $28.53 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear
- Manufacturer Note: MADE IN THAILAND
- Replaces: 13021-1LA1A
Fits the following Nissan Models:
- Armada | 2017-2024 | Midnight Edition, Platinum, Platinum CP, Platinum Reserve, S, SL, SV | 8 Cyl 5.6 L GAS, 8 Cyl 5.6L
- NV | 2017-2021 | S, S/Power, SL, SV | 8 Cyl 5.6 L GAS, 8 Cyl 5.6L
- Titan | 2016-2024 | PRO-4X, Platinum, Platinum Reserve, S, SL, SV, SV/Comf | 8 Cyl 5.6 L GAS, 8 Cyl 5.6L
View More
View related parts
Nissan Sprocket-Crankshaft
Part Number: 13021-EE51B
$24.36 MSRP: $33.58
You Save: $9.22 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear
Fits the following Nissan Models:
- Cube | 2013-2014 | 18, S, SL | 4 Cyl 1.8L
- NV | 2013-2021 | S, SV, Taxi | 4 Cyl 2.0 L GAS, 4 Cyl 2.0L
- Sentra | 2013-2018 | FE, S, SL, SR, SV | 4 Cyl 1.8L
View More

| Page 1 of 10 |Next >

1-20 of 187 Results

About Nissan Crankshaft Pulley

Every part of your vehicle is very important, you can't ignore any one, especially Nissan Crankshaft Pulley. In case the Nissan Crankshaft Pulley is damaged or broken, you should find ways to repair it or look for replacements if it's already beyond repair. Because of all the parts can't stand alone, the broken Crankshaft Pulley must affect other parts. If you find your Nissan Crankshaft Pulley can't work normal, just repair it or come to our website to search the OEM Nissan Crankshaft Pulleys.

Nissan Crankshaft Pulley Parts Questions & Experts Answers

Crankshaft Pulley
12303-7Y000
Q: How to remove and install the crankshaft pulley on Nissan Maxima with SOHC engine?
A:
Disconnect the negative cable from the battery, raise the front of the vehicle, remove the right front wheel, and secure the vehicle on jackstands. Remove the drivebelts. Take off the right front wheel and the inner splash shield from the right fenderwell. Use a strap wrench around the crankshaft pulley to hold it while employing a breaker bar and socket to remove the crankshaft pulley center bolt; a chain-type wrench may be used if an old drivebelt is wrapped around the crankshaft pulley first. Wedge a prybar or two screwdrivers behind the crankshaft pulley and carefully pry it off the crankshaft; if the pulley is difficult to remove, utilize a bolt-type puller. Installation is the reverse of removal.
Crankshaft Pulley
12303-1KC0A
Q: How to properly remove and reinstall the crankshaft pulley, ensuring correct alignment, use of the Woodruff key, and torque settings during the process on 1.6L petrol Nissan Juke?
A:
To remove the auxiliary drivebelt, first, position No 1 cylinder at TDC on its compression stroke if necessary. To prevent crankshaft rotation while unscrewing the pulley bolt, hold the pulley with a suitable tool that locates in the slots to prevent it from turning; if unavailable, select top gear and have an assistant apply the brakes firmly. Unscrew the pulley bolt and its washer, then remove the pulley from the crankshaft. If the pulley is a tight fit, use a puller to withdraw it by refitting the pulley bolt and leaving it approximately 5mm out from the pulley face, then tighten the puller's center bolt to extract the pulley. If the Woodruff key is loose in the crankshaft, remove and store it with the pulley. For refitting, place the Woodruff key back, align the crankshaft pulley groove with the key, and slide the sprocket onto the crankshaft. Lubricate the bolt head and threads with new engine oil, then refit the retaining bolt and washer. Lock the crankshaft as done during removal and tighten the pulley retaining bolt to the specified torque settings. For the final tightening stage, paint marks on the bolt head and pulley to indicate a 60° turn; tighten until the marks align. Finally, refit and adjust the auxiliary drivebelt.