How to remove and install the crankshaft pulley on Nissan Murano?

Remove the cable from the negative terminal of the battery and turn on the parking brake and block the rear wheels. Image Remove the right front wheel: Loosen the lug nuts of the right front wheel the, safely jack up the front part of the car and put it on jackstands, then finally, detach the right front wheel. Disconnect the drivebelt as well as the engine splash shield. Remove the starter as well as fix the driveplate with the help of a large screwdriver. Remove the crankshaft pulley by slackening the bolt that is fixing it and use puller to pull the pulley off the crankshaft while ensure that the right adapter is used to pull on the crankshaft pulley in order to avoid damaged the thread or end of the crank shaft, and ensure that the jaws of the puller are suitably placed on the hub of the pulley. To fit the crankshaft pulley, ensure that the groove of the pulley fits on the key of the crankshaft and slide it over as you fit the bolt that secures it then tighten it to the recommended torque. The rest of the installation procedure, in turn, is in the format of the removal process, as mentioned above. Last of all charge the battery and do the other re learn that could be required.

Genuine Nissan Murano Crankshaft Pulley

Crankshaft Pulley Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Crankshaft Pulleys found

View related parts
Nissan Murano Sprocket-Crankshaft
Part Number: 13021-AL51A
$42.27 MSRP: $58.27
You Save: $16.00 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear
- Replaces: 13021-JN01A, 13021-JK20A, 13021-AL500
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2024 Nissan Murano | CrossCabriolet, LE, LE/ROOF, Midnight Edition, Platinum, S, SE, SL, SL/ROOF, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Crankshaft Pulley
Part Number: 12303-JA11A
$343.10 MSRP: $484.60
You Save: $141.50 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft; Crankshaft Pulley, Pulley
- Replaced by: 12303-3WS0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2015-2019 Nissan Murano | Platinum, S, SL, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Crankshaft Pulley
Part Number: 12303-3WS0A
$343.10 MSRP: $484.60
You Save: $141.50 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft; Crankshaft Pulley, Pulley
- Replaces: 12303-JA10A, 12303-JA15A, 12303-JA11A, 12303-3WS1A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2008-2024 Nissan Murano | CrossCabriolet, LE, LE/ROOF, Midnight Edition, Platinum, S, SL, SL/ROOF, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Crankshaft Pulley
Part Number: 12303-8J101
$276.54 MSRP: $390.60
You Save: $114.06 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft; Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2007 Nissan Murano | S, SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Crankshaft Pulley
Part Number: 12303-5NN0A
$283.51 MSRP: $400.43
You Save: $116.92 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: PULLEY-CRANKSHAFT; Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2025 Nissan Murano | Platinum, SL, SV | 4 Cyl 2.0 L GAS
View related parts
Nissan Murano Crankshaft Pulley
Part Number: 12303-3KY0A
$531.31 MSRP: $750.43
You Save: $219.12 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft; Balancer, Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2017 Nissan Murano | Platinum, SL, SV | 4 Cyl 2.5L | QR25DER
View related parts
Nissan Murano Crankshaft Pulley
Part Number: 12303-JA10A
$343.10 MSRP: $484.60
You Save: $141.50 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft
- Replaced by: 12303-3WS0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2008-2014 Nissan Murano | LE, LE/ROOF, S, SL, SL/ROOF, SV | 6 Cyl 3.5L | VQ35DE

Nissan Murano Crankshaft Pulley

The Crankshaft Pulley is a belt-driven wheel that is directly attached to the engine crankshaft. It transfers the engine torque to external components while reducing engine vibration. Under normal service conditions, the Crankshaft Pulley drives a single serpentine belt to power the alternator, power steering pump, and air conditioning compressor in Nissan models, including the Murano. A rubber layer placed between the hub and inertia ring enables the Crankshaft Pulley to function like a harmonic balancer, preventing crankshaft vibrations and smooth operation. When the rubber ring damage at the pulley of the balancer, it can cause the belt to make noise or get misaligned that affects the output of components. The Crankshaft Pulley prevents belt slippage for alternator charging and squealing via the belt tensioner and belt idler pulleys to keep proper belt tension. The Crankshaft Pulley is a consistently performing Nissan Murano device that allows the engine and Murano components to operate properly and delivers reliable Nissan Murano performance.

If you need any OEM Nissan Murano Crankshaft Pulley, feel free to choose them out of our huge selection of genuine Nissan Murano Crankshaft Pulley. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Murano Crankshaft Pulley Parts Questions & Experts Answers

Crankshaft Pulley
12303-JA10A
Q: How to remove and install the crankshaft pulley on Nissan Murano?
A:
Remove the cable from the negative terminal of the battery and turn on the parking brake and block the rear wheels. Image Remove the right front wheel: Loosen the lug nuts of the right front wheel the, safely jack up the front part of the car and put it on jackstands, then finally, detach the right front wheel. Disconnect the drivebelt as well as the engine splash shield. Remove the starter as well as fix the driveplate with the help of a large screwdriver. Remove the crankshaft pulley by slackening the bolt that is fixing it and use puller to pull the pulley off the crankshaft while ensure that the right adapter is used to pull on the crankshaft pulley in order to avoid damaged the thread or end of the crank shaft, and ensure that the jaws of the puller are suitably placed on the hub of the pulley. To fit the crankshaft pulley, ensure that the groove of the pulley fits on the key of the crankshaft and slide it over as you fit the bolt that secures it then tighten it to the recommended torque. The rest of the installation procedure, in turn, is in the format of the removal process, as mentioned above. Last of all charge the battery and do the other re learn that could be required.