How to remove and install the crankshaft pulley on Nissan Titan?

Disconnect the cable from the negative terminal of the battery. Block the rear wheels and set the parking brake, then drain the cooling system. Raise the front of the vehicle and support it securely on jackstands. If equipped, remove the lower splash shield by taking out the mounting fasteners. Remove the engine cooling fan and fan shroud. Take off the drivebelt. Remove the starter and have an assistant wedge a large screwdriver into the ring gear teeth to prevent the engine from rotating, then unscrew the crankshaft pulley bolt. Remove the pulley; if it is difficult to take off, use a puller that bolts to the hub of the pulley, ensuring the proper spacer is used between the puller screw and the end of the crankshaft to avoid damage. Avoid using a puller with jaws that grip around the outside of the crankshaft pulley to prevent damage to the pulley. Depending on the length of the puller, it may be necessary to remove the radiator for sufficient clearance. To install the crankshaft pulley, align the pulley groove with the key on the crankshaft and slide it onto the crankshaft. Install the crankshaft pulley retaining bolt and tighten it to the specified torque. The remainder of the installation follows the reverse order of removal.

Genuine Nissan Titan Crankshaft Pulley

Crankshaft Pulley Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Crankshaft Pulleys found

View related parts
Nissan Titan Sprocket-Crankshaft
Part Number: 13021-1LU0A
$13.52 MSRP: $18.64
You Save: $5.12 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear
- Replaces: 13021-7S000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2015 Nissan Titan | LE, Off-Road, PRO-4X, S, SE, SL, SV, XE | 8 Cyl 5.6L | VK56DE
View related parts
Nissan Titan Crankshaft Pulley
Part Number: 12303-7S000
$350.92 MSRP: $495.65
You Save: $144.73 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft
- Replaced by: 12303-7S01C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2006 Nissan Titan | LE, SE, XE | 8 Cyl 5.6L | VK56DE
View related parts
Nissan Titan Sprocket-Crankshaft
Part Number: 13021-EZ30A
$70.54 MSRP: $99.63
You Save: $29.09 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear
- Manufacturer Note: MADE IN THAILAND
- Replaces: 13021-1LA1A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2024 Nissan Titan | Platinum, Platinum Reserve, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.6 L GAS, 8 Cyl 5.6L | VK56VD
View related parts
Nissan Titan Crankshaft Pulley
Part Number: 12303-7S01C
$350.92 MSRP: $495.65
You Save: $144.73 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft; Crankshaft Pulley, Pulley
- Replaces: 12303-7S000, 12303-7S01A, 12303-7S01B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2015 Nissan Titan | LE, Off-Road, PRO-4X, S, SE, SL, SV, XE | 8 Cyl 5.6L | VK56DE
View related parts
Nissan Titan Sprocket-Crankshaft
Part Number: 13021-EZ30B
$65.11 MSRP: $91.97
You Save: $26.86 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear
- Manufacturer Note: MADE IN THAILAND
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2024 Nissan Titan | Platinum, Platinum Reserve, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.6 L GAS, 8 Cyl 5.6L | VK56VD
View related parts
Nissan Titan Gear-CRANKSHAFT
Part Number: 13021-EZ40B
$113.34 MSRP: $160.08
You Save: $46.74 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2019 Nissan Titan | Platinum, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.0L Diesel | CEV8D1
View related parts
Nissan Titan Gear-CRANKSHAFT
Part Number: 13021-EZ40A
$114.42 MSRP: $161.62
You Save: $47.20 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2019 Nissan Titan | Platinum, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.0L Diesel | CEV8D1
View related parts
Nissan Titan Crankshaft Pulley
Part Number: 12303-7S01B
$350.92 MSRP: $495.65
You Save: $144.73 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft
- Replaced by: 12303-7S01C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2007-2010 Nissan Titan | LE, Off-Road, PRO-4X, S, SE, SL, SV, XE | 8 Cyl 5.6L | VK56DE
View related parts
Nissan Titan Crankshaft Pulley
Part Number: 12303-7S01A
$350.92 MSRP: $495.65
You Save: $144.73 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft
- Replaced by: 12303-7S01C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2008 Nissan Titan | LE, Off-Road, SE, XE | 8 Cyl 5.6L | VK56DE
View related parts
Nissan Titan Crankshaft Pulley
Part Number: 12303-1LA0B
$447.41 MSRP: $631.93
You Save: $184.52 (30%)
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft; Crankshaft Pulley, Pulley
- Replaces: 12303-1LA0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2024 Nissan Titan | Platinum, Platinum Reserve, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.6 L GAS, 8 Cyl 5.6L | VK56VD
View related parts
Nissan Titan Crankshaft Pulley
Part Number: 12303-EZ40A
$469.60 MSRP: $663.29
You Save: $193.69 (30%)
Product Specifications
- Other Name: Pulley-Crankshaft; Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2019 Nissan Titan | Platinum, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.0L Diesel | CEV8D1

Nissan Titan Crankshaft Pulley

The Crankshaft Pulley transfers engine torque to the serpentine belt while controlling the crank's vibrations. It directly bolts to the crankshaft of Nissan engines as part of the harmonic balancer assembly and uses an inertia ring and rubber layer to absorb oscillations that could otherwise reach component drives. The Crankshaft Pulley spins along with the Titan crankshaft to turn the belt, which runs the alternator, power steering pump, air conditioning compressor, and other belt-driven units whenever the engine is running. The alignment of the pulley is essential for correct belt tracking. Due to the wear of the Crankshaft Pulley and related tensioner and idler components, the belt may become loose, and noise may develop. Consequently, the Nissan component may become less efficient, and the life of the belt is shortened. The Titan engine's arrangement required a single serpentine belt setup, which simplified this drive path. Therefore, a properly functioning Crankshaft Pulley is essential for steady electrical charging, steering assist, and cabin cooling. The Crankshaft Pulley meets factory balance standards. Genuine Nissan parts are designed for the specific loads and damping requirements of Titan powertrains.

If you need any OEM Nissan Titan Crankshaft Pulley, feel free to choose them out of our huge selection of genuine Nissan Titan Crankshaft Pulley. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Titan Crankshaft Pulley Parts Questions & Experts Answers

Crankshaft Pulley
12303-7S000
Q: How to remove and install the crankshaft pulley on Nissan Titan?
A:
Disconnect the cable from the negative terminal of the battery. Block the rear wheels and set the parking brake, then drain the cooling system. Raise the front of the vehicle and support it securely on jackstands. If equipped, remove the lower splash shield by taking out the mounting fasteners. Remove the engine cooling fan and fan shroud. Take off the drivebelt. Remove the starter and have an assistant wedge a large screwdriver into the ring gear teeth to prevent the engine from rotating, then unscrew the crankshaft pulley bolt. Remove the pulley; if it is difficult to take off, use a puller that bolts to the hub of the pulley, ensuring the proper spacer is used between the puller screw and the end of the crankshaft to avoid damage. Avoid using a puller with jaws that grip around the outside of the crankshaft pulley to prevent damage to the pulley. Depending on the length of the puller, it may be necessary to remove the radiator for sufficient clearance. To install the crankshaft pulley, align the pulley groove with the key on the crankshaft and slide it onto the crankshaft. Install the crankshaft pulley retaining bolt and tighten it to the specified torque. The remainder of the installation follows the reverse order of removal.