How to remove and install a crankshaft pulley on 2.4L four cylinder Nissan Pathfinder?

Disconnect the negative cable from the battery. Raise the front of the vehicle and secure it on jackstands. Remove the engine under cover. Remove the lower radiator shroud and remove the engine cooling fan. Remove the drivebelts. Use a strap wrench around the crank-shaft pulley to hold it while using a breaker bar and socket to remove the crankshaft pulley center bolt. Wedge a prybar or two screwdrivers behind the crankshaft pulley and carefully pry it off the crankshaft. If the pulley is difficult to remove, place a two jaw type puller into the openings in the center of the hub and pull it off. Do not place the puller jaws around the outside of the crankshaft pulley or damage to the pulley will occur. Depending on the type of puller you have it may also be necessary to remove the radiator to gain sufficient clearance to use the puller. Installation is the reverse of removal. Tighten the pulley bolt to the specific torque. Adjust the drivebelts.

Genuine Nissan Pathfinder Crankshaft Pulley

Crankshaft Pulley Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

21 Crankshaft Pulleys found

View related parts
Nissan Pathfinder Sprocket-Crankshaft
Part Number: 13021-7Y000
$14.79 MSRP: $20.39
You Save: $5.60 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear
- Manufacturer Note: HITACHI FUNMATSU
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2015 Nissan Pathfinder | LE, Platinum, S, SE, SE Off-Road, Silver Edition, SL, SV, XE | 6 Cyl 3.5L, 6 Cyl 4.0L | VQ35DE, VQ40DE
View related parts
Nissan Pathfinder Sprocket-Crankshaft
Part Number: 13021-0W000
$71.06 MSRP: $100.36
You Save: $29.30 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear, Sprocket, Timing Gear Set
- Manufacturer Note: MAKE USA 32 DIAMETER
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1996-2003 Nissan Pathfinder | LE, SE, XE | 6 Cyl 3.3L | VG33E
View related parts
Nissan Pathfinder Crankshaft Pulley
Part Number: 12303-JA11A
$343.10 MSRP: $484.60
You Save: $141.50 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft; Crankshaft Pulley, Pulley
- Replaced by: 12303-3WS0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2019 Nissan Pathfinder | Platinum, S, SL, SV | 6 Cyl 3.5L | VQ35DD, VQ35DE
View related parts
Nissan Pathfinder Sprocket-Crankshaft
Part Number: 13021-1LU0A
$13.52 MSRP: $18.64
You Save: $5.12 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear
- Replaces: 13021-7S000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2007-2012 Nissan Pathfinder | LE, SE | 8 Cyl 5.6L | VK56DE
View related parts
Nissan Pathfinder Crankshaft Pulley
Part Number: 12303-EA21A
$303.72 MSRP: $428.98
You Save: $125.26 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft
- Replaced by: 12303-EA21B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2012 Nissan Pathfinder | LE, S, SE, SE Off-Road, Silver Edition, SV, XE | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Pathfinder Crankshaft Pulley
Part Number: 12303-4W010
$519.73 MSRP: $734.08
You Save: $214.35 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft
- Replaced by: 12303-4W01A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2003 Nissan Pathfinder | LE, SE, XE | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Pathfinder Crankshaft Pulley
Part Number: 12303-4W001
$519.73 MSRP: $734.08
You Save: $214.35 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft
- Replaced by: 12303-4W01A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2001 Nissan Pathfinder | LE, SE, XE | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Pathfinder Gear-CRANKSHAFT
Part Number: 13021-6KA0A
$66.88 MSRP: $94.47
You Save: $27.59 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sprocket-Crankshaft; Crankshaft Gear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2020 Nissan Pathfinder | Platinum, S, SL, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | VQ35DD
View related parts
Nissan Pathfinder Crankshaft Pulley
Part Number: 12303-0W001
$294.00 MSRP: $415.25
You Save: $121.25 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft; Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1996-2003 Nissan Pathfinder | LE, SE, XE | 6 Cyl 3.3L | VG33E
View related parts
Nissan Pathfinder Crankshaft Pulley
Part Number: 12303-3WS0A
$343.10 MSRP: $484.60
You Save: $141.50 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft; Crankshaft Pulley, Pulley
- Replaces: 12303-JA10A, 12303-JA15A, 12303-JA11A, 12303-3WS1A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2022-2025 Nissan Pathfinder
- 2013-2020 Nissan Pathfinder | Platinum, S, SL, SV | 6 Cyl 3.5L | VQ35DD, VQ35DE
View related parts
Nissan Pathfinder Crankshaft Pulley
Part Number: 12303-7S01C
$350.92 MSRP: $495.65
You Save: $144.73 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft; Crankshaft Pulley, Pulley
- Replaces: 12303-7S000, 12303-7S01A, 12303-7S01B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2007-2012 Nissan Pathfinder | LE, SE | 8 Cyl 5.6L | VK56DE
View related parts
Nissan Pathfinder Crankshaft Pulley
Part Number: 12303-3KY0A
$531.31 MSRP: $750.43
You Save: $219.12 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft; Balancer, Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2014 Nissan Pathfinder | Platinum, SL, SV | 4 Cyl 2.5L | QR25DER
View related parts
Nissan Pathfinder Crankshaft Pulley
Part Number: 12303-7S01B
$350.92 MSRP: $495.65
You Save: $144.73 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft
- Replaced by: 12303-7S01C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2007-2009 Nissan Pathfinder | LE, SE | 8 Cyl 5.6L | VK56DE
View related parts
Nissan Pathfinder Crankshaft Pulley
Part Number: 12303-EA200
$303.72 MSRP: $428.98
You Save: $125.26 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft
- Replaced by: 12303-EA21B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2006 Nissan Pathfinder | LE, S, SE, XE | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Pathfinder Crankshaft Pulley
Part Number: 12303-7S01A
$350.92 MSRP: $495.65
You Save: $144.73 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Crankshaft
- Replaced by: 12303-7S01C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2007-2008 Nissan Pathfinder | LE, SE | 8 Cyl 5.6L | VK56DE
View related parts
Nissan Pathfinder Crankshaft Pulley
Part Number: 12303-AL501
Product Specifications
- Other Name: Pulley-Crankshaft; Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2002-2004 Nissan Pathfinder | LE, SE | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Pathfinder PULLEY Crank
Part Number: 12303-07W00
$205.98 MSRP: $290.93
You Save: $84.95 (30%)
Product Specifications
- Other Name: Pulley-Crankshaft; Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1987-1990 Nissan Pathfinder | DX | 4 Cyl 2.4L | Z24I
View related parts
Nissan Pathfinder Sprocket-Crankshaft
Part Number: 13021-31U01
Product Specifications
- Other Name: Crankshaft Gear
- Replaces: 13021-31U00
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2004 Nissan Pathfinder | LE, SE, XE | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Pathfinder Crankshaft Pulley
Part Number: 12303-12G02
$186.03 MSRP: $262.75
You Save: $76.72 (30%)
Product Specifications
- Other Name: Pulley-Crankshaft; Crankshaft Pulley, Pulley
- Replaces: 12303-12G01
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1987-1995 Nissan Pathfinder | SE, ST, XE | 6 Cyl 3.0L | VG30E, VG30I
View related parts
Nissan Pathfinder Crankshaft Pulley
Part Number: 12303-12G01
$186.03 MSRP: $262.75
You Save: $76.72 (30%)
Product Specifications
- Other Name: Pulley-Crankshaft
- Replaced by: 12303-12G02
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1987-1988 Nissan Pathfinder | SE, ST | 6 Cyl 3.0L | VG30I

| Page 1 of 2 |Next >

1-20 of 21 Results

Nissan Pathfinder Crankshaft Pulley

The Nissan Pathfinder Crankshaft Pulley reduces damaging vibrations from the engine and allows for the sharing of power with necessary components. The Crankshaft Pulley is bolted onto the crankshaft and converts raw torque into belt motion that spins the alternator, power steering pump, and air conditioning compressor. These components keep electricity flowing, the steering light, and cabin temperatures comfortable. The harmonic balancer is also a function of the inside of every Nissan Pathfinder Crankshaft Pulley. Its weighted design serves to absorb oscillations, providing the crankshaft a longer life and ensuring that a driver and passenger feel smooth. Through all the generations of Pathfinder, engineers did not come up with multiple layouts. They stuck to a single reliable layout. Owners will notice not too many size variations as much as they will notice hardly any design variations. That is, the same simple belt-driven mechanism has proven durable year after year. A worn Crankshaft Pulley commonly gets revealed through wobble, squealing belts, or extra vibration as this part sits up front and turns all the while the motor runs. Thus, smart owners of a Nissan model will know that it is time for a replacement before losing component power. The Crankshaft Pulley is essential for maintaining optimal engine performance.

If you need any OEM Nissan Pathfinder Crankshaft Pulley, feel free to choose them out of our huge selection of genuine Nissan Pathfinder Crankshaft Pulley. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Pathfinder Crankshaft Pulley Parts Questions & Experts Answers

Crankshaft Pulley
12303-4W001
Q: How to remove and install a crankshaft pulley on 2.4L four cylinder Nissan Pathfinder?
A:
Disconnect the negative cable from the battery. Raise the front of the vehicle and secure it on jackstands. Remove the engine under cover. Remove the lower radiator shroud and remove the engine cooling fan. Remove the drivebelts. Use a strap wrench around the crank-shaft pulley to hold it while using a breaker bar and socket to remove the crankshaft pulley center bolt. Wedge a prybar or two screwdrivers behind the crankshaft pulley and carefully pry it off the crankshaft. If the pulley is difficult to remove, place a two jaw type puller into the openings in the center of the hub and pull it off. Do not place the puller jaws around the outside of the crankshaft pulley or damage to the pulley will occur. Depending on the type of puller you have it may also be necessary to remove the radiator to gain sufficient clearance to use the puller. Installation is the reverse of removal. Tighten the pulley bolt to the specific torque. Adjust the drivebelts.

Related Nissan Pathfinder Parts

Browse by Year