Nissan 54303-38U27 STRUT Kit Front LH

Connect the lateral arms and trailing arm to the strut. Raise the rear suspension with a floor jack to simulate normal ride height, then tighten the lateral arm bolts and the trailing arm bolts to the torque.

If any undesirable conditions exist, proceed to the strut disassembly procedure.

Carefully place the coil spring onto the lower insulator, ensuring the end of the spring rests in the lowest part of the insulator, fitting into the recessed portion of the lower seat.

To check the shock absorbers, park the vehicle on level ground, turn off the engine, and set the parking brake while checking tire pressures. Push down on one corner of the vehicle and release it; it should stop moving and return to a level position within one or two bounces. If it continues to move or fails to return, the shock absorber may be worn. Repeat this check at the other corners.