Nissan 54302-7Y025 Strut Kit-Front Suspension,RH

To check the shock absorbers, park the vehicle on level ground, turn off the engine, and set the parking brake while checking tire pressures. Push down on one corner of the vehicle and release it; it should stop moving and return to a level position within one or two bounces. If it continues to move or fails to return, the shock absorber may be worn. Repeat this check at the other corners.

Following the tool manufacturer's instructions, install the spring compressor on the spring and compress it sufficiently to relieve all pressure from the upper spring seat. This can be verified by wiggling the spring.

Repeat the procedure to replace the other rear shock absorber.

Install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the specified torque.