Nissan 17202-2Y901 Fuel Tank Assembly

You can Select Your Vehicle to check if 17202-2Y901 fits your vehicle.

Even after cleaning and flushing, explosive fumes can remain and ignite.

Relieve the fuel pressure. Disconnect the cable from the negative terminal of the battery. Siphon the fuel from the fuel tank before removing the tank from the vehicle. Remove the rear seat and the fuel pump/fuel level sending unit access cover. Disconnect the electrical connectors for the fuel pump and fuel level sending unit. On 2000 and later models, at the top of the fuel pump/fuel level sending unit, hold the sides of the fuel line quick disconnect connector, completely depress the connector tabs, and pull out the tube inserted in the retainer. Disconnect both fuel lines. Raise the vehicle and support it securely on jackstands. On 1993 through 1999 models, disconnect the fuel feed and return lines from the fuel tank. Loosen the hose clamps and detach the fuel tank filler hose and vapor hose from the fuel filler neck and the fuel tank. Disconnect the evaporative emissions canister hoses. Place a floor jack under the tank and position a wood plank between the jack pad and the tank. Raise the jack until it's supporting the tank. Remove the bolts that retain the fuel tank mounting straps. The straps are hinged at the other end so you can swing them out of the way. Slowly lower the jack while guiding the fuel tank past the exhaust pipe. Remove the tank from the vehicle. Installation is the reverse of removal. Clean engine oil can be used as an assembly aid when pushing the fuel filler hose back onto the fuel tank.