How to replace the shift cable on the 2012 Nissan Sentra?

To replace the shift interlock cable, first move the shift lever to the Neutral position and then remove the shift knob. Next, take out the center console and move the shift lever to the Park position. Disconnect the shift interlock cable from the interlock rod by pressing in on the cable tangs and sliding the cable away from the shifter assembly, followed by removing the cable from the shifter assembly bracket. Proceed to remove the lower steering column trim panel and the steering column covers. At the lock cylinder, slide the lock plate away from the cable and pull the cable from the lock cylinder, then remove the cable from the vehicle. For installation, reverse the removal steps, ensuring the shift lever is in the Park position and turning the ignition switch to ACC or ON while installing the lock plate and cable into the ignition switch, then turn the ignition switch to LOCK after installation. Note that adjustment of the shift interlock cable is not possible; if the key cannot be removed when in Park, check the shift cable adjustment.

Genuine 2012 Nissan Sentra Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Shift Cables found

View related parts
2012 Nissan Sentra Control Cable Assembly
Part Number: 34935-ET100
$72.89 MSRP: $102.95
You Save: $30.06 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assy-Control; Shift Control Cable
- Lookup Code: 34935M
- Item Weight: 2.10 Pounds
- Item Dimensions: 53.0 x 2.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 34935-ET100
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2012 Nissan Sentra Submodels:
- 20 | 4 Cyl 2.0L | MR20DE
View related parts
2012 Nissan Sentra Manual Transmission Control Cable Assembly
Part Number: 34413-ET000
$187.44 MSRP: $264.75
You Save: $77.31 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assy-Control,Manual Transmission; Shift Control Cable
- Lookup Code: 34413M
- Item Weight: 6.10 Pounds
- Item Dimensions: 32.2 x 12.1 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 34413-ET000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2012 Nissan Sentra Submodels:
- 20 | 4 Cyl 2.0L | MR20DE
View related parts
2012 Nissan Sentra Manual Transmission Control Cable Assembly
Part Number: 34413-ET80A
$185.98 MSRP: $262.68
You Save: $76.70 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assy-Control,Manual Transmission; Shift Control Cable
- Lookup Code: 34413M
- Item Weight: 3.20 Pounds
- Item Dimensions: 55.7 x 24.5 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 34413-ET80A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2012 Nissan Sentra Submodels:
- SE-R, Spec V | 4 Cyl 2.5L | QR25DE
View related parts
2012 Nissan Sentra Control Cable Assembly
Part Number: 34935-ET80A
Product Specifications
- Other Name: Cable Assy-Control; Shift Control Cable
- Lookup Code: 34935M
- Item Weight: 1.40 Pounds
- Item Dimensions: 54.1 x 2.0 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 34935-ET80A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2012 Nissan Sentra Submodels:
- SE-R | 4 Cyl 2.5L | QR25DE

2012 Nissan Sentra Shift Cable

Committed to delivering top-notch quality at affordable prices, our website is your go-to source for OEM 2012 Nissan Sentra Shift Cable worldwide. Each of our genuine 2012 Nissan Sentra Shift Cable come with a manufacturer's warranty, so rest assured, quality and cost are covered. With us, you're making a smart choice that stands the test of time.

2012 Nissan Sentra Shift Cable Parts Questions & Experts Answers

Q: How to replace the shift cable on the 2012 Nissan Sentra?
A: To replace the shift interlock cable, first move the shift lever to the Neutral position and then remove the shift knob. Next, take out the center console and move the shift lever to the Park position. Disconnect the shift interlock cable from the interlock rod by pressing in on the cable tangs and sliding the cable away from the shifter assembly, followed by removing the cable from the shifter assembly bracket. Proceed to remove the lower steering column trim panel and the steering column covers. At the lock cylinder, slide the lock plate away from the cable and pull the cable from the lock cylinder, then remove the cable from the vehicle. For installation, reverse the removal steps, ensuring the shift lever is in the Park position and turning the ignition switch to ACC or ON while installing the lock plate and cable into the ignition switch, then turn the ignition switch to LOCK after installation. Note that adjustment of the shift interlock cable is not possible; if the key cannot be removed when in Park, check the shift cable adjustment.