What factors should you consider regarding coil springs and shock absorber wear on the front struts of a 2016 Nissan Rogue?

If the struts or coil springs exhibit signs of wear like fluid leakage, deterioration of ability to damp, or if the physical condition is compromised through chipped or cracked then before beginning with any work, one should consult as strut/shock absorber assemblies are non-repairable if there are issues with it. Ordinary strut assemblies with springs may also be obtained on an exchange basis with a view to easing the process; it is therefore advisable to establish the cost and availability of the parts beforehand. It is dangerous to disassemble a strut, sometimes body harm can occur; utilize a high-quality spring compressor, read the user instructions thoroughly. After replacing the old coil spring with the new one within the strut assembly, put the old one in a secure place. When disassembling, it is necessary to initially unbolt the strut and spring assembly and after that fasten the strut and spring on a wooden plank with rags to avoid damaging them, though should not apply excessive force. Screw the spring compressor to the standards as recommended by the manufacturer and tighten the spring until the pressure is lifted out from the upper spring seat that can be ascertained by moving the spring. Subsequently, use an Allen wrench to unlock the piston rod nut and then unscrew the upper supporting bracket of suspension and examine the bearing to see if it can run smoothly, and if not, the entire bearing should be replaced. Loosen the suspension support bolt and look at the rubber part to see if there is any signs of separation and replace them if there has been. Release the lower end of the spring and pull the spring seat along with the upper insulator off the piston rod; it is important to inspect the rubber spring seat and if it is damaged then replace it. Pick the compressed spring from the assembly gently and put it aside, being cautious and avoiding contact with the ends of the spring with body parts. Slide the dust boot off the piston rod and determine if the lower insulator is worn out and needs to be replaced. For reassembly, if fitting new lower insulator, align it in the right position and further insert the damper rod and place the dust boot in its maximum length. Put the coil spring to the lower insulator with the end seated in the recessed portion of the insulator. Applying the mark or the arrow, you have to fix the upper insulator and spring seat in a way that their arrows are out of phase. Lastly, screw on and fix the dust seal and suspension support on the piston rod the torque the nut as per the recommended torque, replace the strut or shock absorber along with the coil spring.

Genuine 2016 Nissan Rogue Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Shock Absorbers found

View related parts
2016 Nissan Rogue Strut Kit Front Right Hand
Part Number: E4302-4BF1C
$173.45 MSRP: $256.83
You Save: $83.38 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension,RH; Strut
- Position: Passenger Side
- Replaces: E4302-4BF1B
- Lookup Code: 54302K
- Item Weight: 11.30 Pounds
- Item Dimensions: 21.2 x 7.7 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E4302-4BF1C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2016 Nissan Rogue Submodels:
- S, SL, SL/Premium, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
2016 Nissan Rogue Strut Kit Front Left Hand
Part Number: E4303-4BF1C
$173.45 MSRP: $256.83
You Save: $83.38 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension,LH; Strut
- Position: Driver Side
- Replaces: E4303-4BF1B
- Lookup Code: 54303K
- Item Weight: 10.70 Pounds
- Item Dimensions: 21.4 x 8.1 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E4303-4BF1C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2016 Nissan Rogue Submodels:
- S, SL, SL/Premium, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
2016 Nissan Rogue Shock Absorber Kit Rear
Part Number: E6210-4BA1C
$130.60 MSRP: $189.15
You Save: $58.55 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Kit-Rear; Shock, Shock Absorber
- Position: Rear
- Replaces: E6210-4BA1B
- Lookup Code: 56210K
- Item Weight: 5.00 Pounds
- Item Dimensions: 23.7 x 4.1 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: E6210-4BA1C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2016 Nissan Rogue Submodels:
- S, SL, SL/Premium, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
2016 Nissan Rogue Strut Kit Front Left Hand
Part Number: E4303-4BA1C
$188.69 MSRP: $279.40
You Save: $90.71 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension,LH; Strut
- Position: Driver Side
- Replaces: E4303-4BA1B
- Lookup Code: 54303K
- Item Weight: 10.30 Pounds
- Item Dimensions: 21.4 x 7.7 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E4303-4BA1C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2016 Nissan Rogue Submodels:
- S, SL, SL/Premium, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
2016 Nissan Rogue Strut Kit Front Left Hand
Part Number: E4303-5HA3A
$367.19 MSRP: $560.42
You Save: $193.23 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension,LH
- Position: Driver side
- Replaced by: E4303-5HL0A
- Lookup Code: 54303K
- Item Weight: 10.50 Pounds
- Item Dimensions: 24.7 x 8.6 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E4303-5HA3A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2016 Nissan Rogue Submodels:
- S, SL, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
2016 Nissan Rogue Strut Kit Front Right Hand
Part Number: E4302-4BA1D
$188.79 MSRP: $279.55
You Save: $90.76 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension,RH; Strut
- Position: Passenger Side
- Lookup Code: 54302K
- Item Weight: 10.40 Pounds
- Item Dimensions: 27.3 x 9.3 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E4302-4BA1D
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2016 Nissan Rogue Submodels:
- S, SL, SL/Premium, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
2016 Nissan Rogue Strut Kit Front Right Hand
Part Number: E4302-5HA3A
$367.19 MSRP: $560.42
You Save: $193.23 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension,RH
- Position: Passenger Side
- Replaced by: E4302-5HL0A
- Lookup Code: 54302K
- Item Weight: 10.30 Pounds
- Item Dimensions: 24.7 x 9.5 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E4302-5HA3A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2016 Nissan Rogue Submodels:
- S, SL, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
2016 Nissan Rogue Strut Kit Front Left Hand
Part Number: E4303-4BA1D
$188.79 MSRP: $279.55
You Save: $90.76 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension,LH; Strut
- Position: Driver Side
- Lookup Code: 54303K
- Item Weight: 11.10 Pounds
- Item Dimensions: 8.0 x 8.8 x 26.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E4303-4BA1D
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2016 Nissan Rogue Submodels:
- S, SL, SL/Premium, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
2016 Nissan Rogue Shock Absorber Kit Rear
Part Number: E6210-5HA0B
$128.30 MSRP: $185.82
You Save: $57.52 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Kit-Rear
- Position: Rear
- Replaced by: E6210-5HL0A
- Lookup Code: 56210K
- Item Weight: 4.50 Pounds
- Item Dimensions: 27.5 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: E6210-5HA0B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2016 Nissan Rogue Submodels:
- S, SL, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
2016 Nissan Rogue Front Suspension Strut Kit Left Hand
Part Number: E4303-5HA2B
$197.92 MSRP: $293.07
You Save: $95.15 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension,LH; Strut
- Position: Driver Side
- Lookup Code: 54303K
- Item Weight: 10.80 Pounds
- Item Dimensions: 7.7 x 7.9 x 26.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E4303-5HA2B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2016 Nissan Rogue Submodels:
- S, SL, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
2016 Nissan Rogue ABSORBER Assembly-Shock,Rear
Part Number: E6210-4BA0C
$124.20 MSRP: $179.88
You Save: $55.68 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Kit-Rear; Shock, Shock Absorber
- Position: Rear
- Replaces: E6210-4BA0B
- Lookup Code: 56210K
- Item Weight: 4.90 Pounds
- Item Dimensions: 23.5 x 4.2 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: E6210-4BA0C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2016 Nissan Rogue Submodels:
- S, SL, SL/Premium, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
2016 Nissan Rogue Strut Kit Front Right Hand
Part Number: E4302-4BA1C
$188.69 MSRP: $279.40
You Save: $90.71 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension,RH; Strut
- Position: Passenger Side
- Replaces: E4302-4BA1B
- Lookup Code: 54302K
- Item Weight: 11.00 Pounds
- Item Dimensions: 22.1 x 8.1 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E4302-4BA1C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2016 Nissan Rogue Submodels:
- S, SL, SL/Premium, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
2016 Nissan Rogue Shock Absorber Kit Rear
Part Number: E6210-5HA1B
$132.50 MSRP: $191.90
You Save: $59.40 (31%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Kit-Rear; Shock, Shock Absorber
- Position: Rear
- Lookup Code: 56210K
- Item Weight: 4.70 Pounds
- Item Dimensions: 24.7 x 3.6 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: E6210-5HA1B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2016 Nissan Rogue Submodels:
- S, SL, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
2016 Nissan Rogue Strut Kit Front Left Hand
Part Number: E4303-5HA1B
$369.12 MSRP: $563.37
You Save: $194.25 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension,LH; Strut
- Position: Driver Side
- Lookup Code: 54303K
- Item Weight: 10.40 Pounds
- Item Dimensions: 25.8 x 9.1 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E4303-5HA1B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2016 Nissan Rogue Submodels:
- S, SL, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
2016 Nissan Rogue Strut Kit Front Right Hand
Part Number: E4302-5HA1B
$369.12 MSRP: $563.37
You Save: $194.25 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension,RH; Strut
- Position: Passenger Side
- Replaces: 54302-5HA1B
- Lookup Code: 54302K
- Item Weight: 9.90 Pounds
- Item Dimensions: 9.3 x 9.4 x 24.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E4302-5HA1B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2016 Nissan Rogue Submodels:
- S, SL, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
2016 Nissan Rogue Front Suspension Strut Kit Right Hand
Part Number: E4302-5HA2B
$197.92 MSRP: $293.07
You Save: $95.15 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension,RH; Strut
- Position: Passenger Side
- Lookup Code: 54302K
- Item Weight: 10.60 Pounds
- Item Dimensions: 8.1 x 8.2 x 27.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E4302-5HA2B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2016 Nissan Rogue Submodels:
- S, SL, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
2016 Nissan Rogue Shock Absorber Kit Rear
Part Number: E6210-4BA0D
$124.26 MSRP: $179.97
You Save: $55.71 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Kit-Rear; Shock, Shock Absorber
- Position: Rear
- Lookup Code: 56210K
- Item Weight: 4.60 Pounds
- Item Dimensions: 4.2 x 4.1 x 24.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: E6210-4BA0D
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
More Info
Fits the following 2016 Nissan Rogue Submodels:
- S, SL, SL/Premium, SV, SV Premium | 4 Cyl 2.5L | QR25DE

2016 Nissan Rogue Shock Absorber

Committed to delivering top-notch quality at affordable prices, our website is your go-to source for OEM 2016 Nissan Rogue Shock Absorber worldwide. Each of our genuine 2016 Nissan Rogue Shock Absorber come with a manufacturer's warranty, so rest assured, quality and cost are covered. With us, you're making a smart choice that stands the test of time.

2016 Nissan Rogue Shock Absorber Parts Questions & Experts Answers

Q: What factors should you consider regarding coil springs and shock absorber wear on the front struts of a 2016 Nissan Rogue?
A: If the struts or coil springs exhibit signs of wear like fluid leakage, deterioration of ability to damp, or if the physical condition is compromised through chipped or cracked then before beginning with any work, one should consult as strut/shock absorber assemblies are non-repairable if there are issues with it. Ordinary strut assemblies with springs may also be obtained on an exchange basis with a view to easing the process; it is therefore advisable to establish the cost and availability of the parts beforehand. It is dangerous to disassemble a strut, sometimes body harm can occur; utilize a high-quality spring compressor, read the user instructions thoroughly. After replacing the old coil spring with the new one within the strut assembly, put the old one in a secure place. When disassembling, it is necessary to initially unbolt the strut and spring assembly and after that fasten the strut and spring on a wooden plank with rags to avoid damaging them, though should not apply excessive force. Screw the spring compressor to the standards as recommended by the manufacturer and tighten the spring until the pressure is lifted out from the upper spring seat that can be ascertained by moving the spring. Subsequently, use an Allen wrench to unlock the piston rod nut and then unscrew the upper supporting bracket of suspension and examine the bearing to see if it can run smoothly, and if not, the entire bearing should be replaced. Loosen the suspension support bolt and look at the rubber part to see if there is any signs of separation and replace them if there has been. Release the lower end of the spring and pull the spring seat along with the upper insulator off the piston rod; it is important to inspect the rubber spring seat and if it is damaged then replace it. Pick the compressed spring from the assembly gently and put it aside, being cautious and avoiding contact with the ends of the spring with body parts. Slide the dust boot off the piston rod and determine if the lower insulator is worn out and needs to be replaced. For reassembly, if fitting new lower insulator, align it in the right position and further insert the damper rod and place the dust boot in its maximum length. Put the coil spring to the lower insulator with the end seated in the recessed portion of the insulator. Applying the mark or the arrow, you have to fix the upper insulator and spring seat in a way that their arrows are out of phase. Lastly, screw on and fix the dust seal and suspension support on the piston rod the torque the nut as per the recommended torque, replace the strut or shock absorber along with the coil spring.

Related 2016 Nissan Rogue Parts

Alternate Year Models

2015 Nissan Rogue Shock Absorber 2017 Nissan Rogue Shock Absorber