My Garage
Cart

Genuine Nissan 280ZX Cylinder Head Bolts

Cylinder Head Bolts Set
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Cylinder Head Bolts found

  • Diagram for Nissan 280ZX Cylinder Head Bolts - 08120-61228
    View related parts

    Nissan 280ZX Bolt Hex

    Part Number: 08120-61228
    $0.65 MSRP: $0.83
    You Save: $0.18 (22%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Bolt; Pulley Bolt
    • Replaces: 08120-61282, 11120-D0100, 08120-6121E
    • Warranty: This genuine part is guaranteed by Nissan's factory warranty.
    Fits the following Vehicles:
    • 1979-1982 Nissan 280ZX | GL, NON GL | 6 Cyl 2.8L | L28E
  • Diagram for Nissan 280ZX Cylinder Head Bolts - 11056-P7600
    View related parts

    Nissan 280ZX Bolt-Short

    Part Number: 11056-P7600
    $62.06 MSRP: $87.65
    You Save: $25.59 (30%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Bolt-Cylinder Head
    • Replaces: 11056-21000, 11056-P3000
    • Warranty: This genuine part is guaranteed by Nissan's factory warranty.
    Fits the following Vehicles:
    • 1979-1983 Nissan 280ZX | GL, NON GL | 6 Cyl 2.8L | L28E, L28ET
  • Diagram for Nissan 280ZX Cylinder Head Bolts - 11059-P7600
    View related parts

    Nissan 280ZX Bolt-Long

    Part Number: 11059-P7600
    $25.38 MSRP: $34.98
    You Save: $9.60 (28%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Bolt-Cylinder Head
    • Warranty: This genuine part is guaranteed by Nissan's factory warranty.
    Fits the following Vehicles:
    • 1980-1983 Nissan 280ZX | GL | 6 Cyl 2.8L | L28ET
  • Diagram for Nissan 280ZX Cylinder Head Bolts - 11059-P3000
    View related parts

    Nissan 280ZX Bolt

    Part Number: 11059-P3000
    $92.34 MSRP: $130.42
    You Save: $38.08 (30%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Bolt-Cylinder Head
    • Manufacturer Note: 12T LONG
    • Replaces: 11059-21000
    • Warranty: This genuine part is guaranteed by Nissan's factory warranty.
    Fits the following Vehicles:
    • 1979-1983 Nissan 280ZX | GL, NON GL | 6 Cyl 2.8L | L28E
  • Diagram for Nissan 280ZX Cylinder Head Bolts - 11056-P3000
    View related parts

    Nissan 280ZX Bolt

    Part Number: 11056-P3000
    $62.06 MSRP: $87.65
    You Save: $25.59 (30%)
    Ships in 1 Business Day
    ADD TO CART
    Product Specifications
    • Other Name: Bolt-Cylinder Head
    • Manufacturer Note: 12T SHORT
    • Replaced by: 11056-P7600
    • Warranty: This genuine part is guaranteed by Nissan's factory warranty.
    Fits the following Vehicles:
    • 1979-1983 Nissan 280ZX | GL, NON GL | 6 Cyl 2.8L | L28E

Nissan 280ZX Cylinder Head Bolts

Nissan 280ZX Cylinder Head Bolts provide the engine with an airtight union, locking the head and block together so power, coolant, and oil remain on their assigned paths. Designed using torque to yield construction, these Cylinder Head Bolts stretch just enough to provide even clamping. Therefore, Nissan drivers will benefit from improved reliability due to the rapid heat changes caused by every spirited 280ZX ride. When the head is pulled, drivers change out the older reusable hardware for new Cylinder Head Bolts. This prevents any leaks from happening, which cause misfires, overheating, or messy fluid mixing. This makes sure the punchy inline six remains in the 280ZX. Genuine Nissan parts have the right metallurgy and thread spec. The Cylinder Head Bolts hit the factory torque angle no problem, will help keep your warranty coverage intact, and make reassembly easier on your weekend. 280ZX owners will benefit. Due to extensive production compatibility, both naturally aspirated and turbo 280ZX trims will benefit from the same exact fit of the Cylinder Head Bolts. Capable of supporting up to 180 bhp without fuss, it is true Nissan through and through. Characterized by a slim shank design and rolled threads, the Cylinder Head Bolts focus force directly on the gasket. This increases efficiency and enhances combustion pressure for sharper throttle response, a distinctive Nissan characteristic. Corrosion resistant coating simultaneously allows the Cylinder Head Bolts to shrug off years of heat cycling, salt, and moisture. This way, the device prevents sudden fastener failure for peace of mind. Many owners claim that replacing the Nissan specified Cylinder Head Bolts restores cold start smoothness and stabilizes the temperature gauge. This shows that a small, often overlooked set of fasteners can play a large role in the 280ZX's enduring reputation for reliability and performance.

If you need any OEM Nissan 280ZX Cylinder Head Bolts, feel free to choose them out of our huge selection of genuine Nissan 280ZX Cylinder Head Bolts. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Related Nissan 280ZX Parts