How to replace and adjust the brake light switch on Nissan 300ZX?

The brake light switch is the top switch mounted to the top of the brake pedal. Begin by disconnecting the wires leading to the switch, then loosen the locknut located on the pedal side of the switch and unscrew the switch from the retaining bracket. Installation follows the reverse of the removal procedure, and once installed, adjust the switch-to-pedal clearance. Confirm that brake pedal free play is within specifications by using a feeler gauge inserted between the pedal stopper and the threaded end of the brake light switch. Turn the brake light switch adjusting nut until the distance between the switch and stopper meets the specified measurement, then tighten the adjusting nut. Adjust the Automatic Speed Control Device (ASCO) switch in the same manner as the brake light switch. Finally, press the brake pedal to ensure that the brake lights illuminate when depressed and turn off when released.

Genuine Nissan 300ZX Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Light Switches found

View related parts
Nissan 300ZX Stop Lamp Switch Assembly
Part Number: 25320-75A00
$18.10 MSRP: $24.95
You Save: $6.85 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy-Stop Lamp
- Replaced by: 25320-75A0E
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1984-1987 Nissan 300ZX | GL, GLL, SF, SS | 6 Cyl 3.0L | VG30, VG30T
View related parts
Nissan 300ZX Clutch Pedal Position Switch
Part Number: 25325-D4000
$27.48 MSRP: $41.33
You Save: $13.85 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy-Clutch
- Replaced by: 25325-D400E
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1986-1996 Nissan 300ZX | GL, GLL, SF, SS | 6 Cyl 3.0L | VD30DTT, VG30, VG30D, VG30DTT, VG30T
View related parts
Nissan 300ZX Stoplamp Switch
Part Number: 25320-21P00
$52.63 MSRP: $79.15
You Save: $26.52 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy-Stop Lamp
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1986-1996 Nissan 300ZX | GL, GLL, SF, SS | 6 Cyl 3.0L | VD30DTT, VG30, VG30D, VG30DTT, VG30T
View related parts
Nissan 300ZX Ascd Cancel Switch Assembly
Part Number: 25300-62J00
$48.08 MSRP: $72.31
You Save: $24.23 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy-Ascd Cancel
- Replaced by: 25300-62J0E
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1992-1996 Nissan 300ZX | GL, GLL | 6 Cyl 3.0L | VD30DTT, VG30D, VG30DTT
View related parts
Nissan 300ZX Ascd Cancel Switch Assembly
Part Number: 25300-V5000
$48.08 MSRP: $72.31
You Save: $24.23 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assy-Ascd Cancel
- Replaced by: 25300-62J0E
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1984-1993 Nissan 300ZX | GL, GLL, SS | 6 Cyl 3.0L | VD30DTT, VG30, VG30D, VG30DTT, VG30T
View related parts
Nissan 300ZX Stop Lamp Switch Assembly
Part Number: 25320-01B00
$18.10 MSRP: $24.95
You Save: $6.85 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy-Stop Lamp
- Replaced by: 25320-75A0E
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1984-1987 Nissan 300ZX | GL, GLL, SF, SS | 6 Cyl 3.0L | VG30, VG30T

Nissan 300ZX Brake Light Switch

When the driver presses the brake pedal, the Nissan 300ZX Brake Light Switch activates the rear brake lamps. This alerts traffic behind the car that it is slowing down or stopping. The Brake Light Switch in the Nissan 300ZX is installed under the dashboard on a bracket that touches the brake pedal arm. This type of switch completes an electrical circuit when movement causes contact or release. Then, power is sent to the brake light bulbs. This feature is specifically designed to activate the rear lights instantly in conditions of poor visibility like darkness or heavy rain. It is part of the lighting system that supports safe driving in heavy traffic, darkness, and bad weather. This design of Brake Light Switch uses a simple on-off mechanism that is able to give a consistent response every time the pedal is applied. The Nissan 300ZX does not have alternative versions or specialties. This means that the Brake Light Switch is the same for the entire model range. A functioning Brake Light Switch allows the Nissan 300ZX to remain visible to the driver behind and signal at every stop.

If you need any OEM Nissan 300ZX Brake Light Switch, feel free to choose them out of our huge selection of genuine Nissan 300ZX Brake Light Switch. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan 300ZX Brake Light Switch Parts Questions & Experts Answers

Stop Lamp Switch Assembly
25320-75A00
Q: How to replace and adjust the brake light switch on Nissan 300ZX?
A:
The brake light switch is the top switch mounted to the top of the Brake Pedal. Begin by disconnecting the wires leading to the switch, then loosen the locknut located on the pedal side of the switch and unscrew the switch from the retaining bracket. Installation follows the reverse of the removal procedure, and once installed, adjust the switch-to-pedal clearance. Confirm that brake pedal free play is within specifications by using a feeler gauge inserted between the pedal stopper and the threaded end of the brake light switch. Turn the brake light switch adjusting nut until the distance between the switch and stopper meets the specified measurement, then tighten the adjusting nut. Adjust the Automatic Speed Control Device (ASCO) switch in the same manner as the brake light switch. Finally, press the brake pedal to ensure that the brake lights illuminate when depressed and turn off when released.