In order to un-install the rear speakers, one pulls forward the back of the speaker cover to release it and then pulls up to get the three bolts that hold the speaker in place, after that, a user disconnects the electrical leads by raising the speakers from the car's interior. For installation reverse the process of removal, to make sure that we do not Component most of the screws inserted. For the door speakers, first, open the door and pull out the inner trim, and on the inside of the door find where the screws holding the speakers are and unscrew it, pull off the speaker, and clip off the electrical connector. For removal of the door speakers the process is followed in reverse for the installation of the door speakers.