How to Replace the Blower Motor and its Assembly on Nissan 350Z?

To replace the blower motor, first remove the lower instrument panel insulator below the glove box and detach the electrical connector from the blower motor. Then remove the mounting screws and lower the blower motor out of the housing. If either the fan is damaged, the entire unit must be replaced as an assembly. Installation is the reverse of removal.

Genuine Nissan 350Z Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Blower Motors found

View related parts
Nissan 350Z Motor Assy-Blower W/Case
Part Number: 27225-AM611
$193.70 MSRP: $273.58
You Save: $79.88 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 27225-1EA0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2008 Nissan 350Z | 350Z, Base, Enthusiast, GT, Touring, Track | 6 Cyl 3.5L | VQ35DE, VQ35HR
View related parts
Nissan 350Z Motor Assembly - Blower W/CASE
Part Number: 27225-AM610
$193.70 MSRP: $273.58
You Save: $79.88 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assy-Blower W/Case
- Replaced by: 27225-1EA0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2005 Nissan 350Z | Base, Enthusiast | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan 350Z Front Blower Assembly
Part Number: 27200-CD000
$353.94 MSRP: $483.79
You Save: $129.85 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Blower Assy-Front
- Position: Front
- Replaced by: 27200-CD00A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2007 Nissan 350Z | 350Z, Base, Enthusiast, GT, Touring, Track | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan 350Z Front Blower Assembly
Part Number: 27200-CD00A
Product Specifications
- Other Name: Blower Assy-Front; Blower Assembly
- Position: Front
- Replaces: 27200-CD000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2008 Nissan 350Z | 350Z, Base, Enthusiast, GT, Touring, Track | 6 Cyl 3.5L | VQ35DE, VQ35HR

Nissan 350Z Blower Motor

The Nissan 350Z Blower Motor powers the fan in the vehicle's heating, ventilation and air conditioning system. It pushes warmed or cooled air through the ducts into the cabin as well as into the windshield so the driver and passengers are comfortable and clear. The dash-mounted controls send commands to the Blower Motor that enable the driver to increase or decrease airflow quickly, making it easy to blast heat on a cold morning or maximize air conditioning after the car has sat in the sun. These controls are connected to a Blower Motor control module, which is an electronic board wired directly to the unit so that electrical signals translate knob or switch positions into changes in fan speed. The Nissan climate system may stop working if there is an issue with module electronics, wiring, physical controls of the Blower Motor, or its supply circuitry. Climate settings will be locked. A Nissan 350Z driver can control airflow for optimum safety and comfort, thanks to consistently working controls. In particular, a properly powered Nissan 350Z cabin fan depends on a reliable Blower Motor. Every Nissan 350Z owner should take care of this motor and its circuitry. A 350Z cabin may fog or overheat without predictable output.

If you need any OEM Nissan 350Z Blower Motor, feel free to choose them out of our huge selection of genuine Nissan 350Z Blower Motor. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan 350Z Blower Motor Parts Questions & Experts Answers

Motor Assembly - Blower W/CASE
27225-AM610
Q: How to Replace the Blower Motor and its Assembly on Nissan 350Z?
A:
To replace the blower motor, first remove the lower instrument panel insulator below the glove box and detach the electrical connector from the blower motor. Then remove the mounting screws and lower the blower motor out of the housing. If either the fan is damaged, the entire unit must be replaced as an assembly. Installation is the reverse of removal.