×
- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Nissan Parts
- Nissan Accessories
My Garage
My Account
Cart
Genuine Nissan 350Z Ignition Switch
Starter Ignition Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Ignition Switches found
Nissan 350Z Ignition Switch
Part Number: 48750-0M010$65.35 MSRP: $87.90You Save: $22.55 (26%)Ships in 1-3 Business Days
Nissan 350Z Ignition Switch Assembly
Part Number: 48750-AD000$41.88 MSRP: $57.73You Save: $15.85 (28%)Ships in 1-3 Business Days
Nissan 350Z Ignition Switch
Nissan 350Z Ignition Switch allows the driver to regulate distribution of power and start the engine by turning a key in an assembly mounted on the column. In the Nissan 350Z electrical system, the Ignition Switch serves as a passageway of current. Once the proper key is inserted and turned to start the switch commands battery current to the starter, ignition and fuel injection circuitry to start the engine, and the acc position allows other devices such as the radio or power windows to use without the engine running. In off or lock, the current is switched off, the steering shaft is locked and the key may be taken out. The Ignition Switch is only turned on when the key matches the lock tumblers to provide theft protection and a coded key system is applied to prevent the engine starting unless the signal of the embedded chip is read. Contact or wear failure of the Ignition Switch may result in difficulty, loss of components, no-start conditions or engine shut-off on any Nissan 350Z, such that a functioning Nissan 350Z Ignition Switch is required to be operated reliably.
If you need any OEM Nissan 350Z Ignition Switch, feel free to choose them out of our huge selection of genuine Nissan 350Z Ignition Switch. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.
Nissan 350Z Ignition Switch Parts Questions & Experts Answers
- Q: How to determine if it's recommended to replace the ignition lock cylinder and ignition switch at home on the Nissan 350Z?A:Because a new ignition ignition lock cylinder comes with new ignition keys that must be programmed with a factory scan tool, it is not recommended to attempt replacing the ignition ignition lock cylinder assembly at home. Begin by disconnecting the cable from the negative battery terminal. Next, remove the steering column covers and the Instrument Cluster/trim panel assembly. Disconnect the electrical connector from the ignition switch by depressing the release tab and pulling off the connector. Remove the ignition switch mounting screws and take the switch out of the ignition lock cylinder housing. When installing the new ignition switch, ensure that the T-shaped hole in the switch aligns with the T-shaped protrusion on the ignition ignition lock cylinder assembly. Rotate the ignition switch as necessary to align the mounting screw holes, then install and securely tighten the mounting screws. The installation process is the reverse of removal. Finally, rotate the ignition key through all positions to ensure it operates smoothly and verify that the engine starts when the key is turned to START.
