How to remove and install the hood latch and Hood Cable on Nissan Murano?

To remove the latch, first, take off the radiator grille. Scribe a line around the latch for alignment during installation, then remove the latch retaining bolts and the latch itself. Flip the hood latch assembly over and disengage the hood release cable. For the cable, unbolt the hood release latch and disconnect the cable from it, then remove the left inner fender well liner. Detach the cable from the clips securing it along its length and disconnect it from the release handle. Pull the cable grommet into the passenger compartment and then pull the cable through the hole. For installation, reverse the removal steps, ensuring to push on the grommet from the passenger compartment to seat it snugly in the firewall. Adjust the latch so the hood engages securely when closed and the hood bumpers are slightly compressed.

Genuine Nissan Murano Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Hood Cables found

View related parts
Nissan Murano Cable Assembly-Hood Lock
Part Number: 65621-1AA0A
$79.99 MSRP: $123.25
You Save: $43.26 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Lock Control; Release Cable
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2008-2014 Nissan Murano | LE, LE/ROOF, S, SL, SL/ROOF, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Hood Lock Control Cable Assembly
Part Number: 65621-9UA0A
$67.41 MSRP: $103.87
You Save: $36.46 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Lock Control; Release Cable
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2017-2024 Nissan Murano | Midnight Edition, Platinum, S, SL, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Hood Lock Control Cable Assembly
Part Number: 65621-5AA0A
$74.52 MSRP: $114.82
You Save: $40.30 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Lock Control; Release Cable
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2015-2018 Nissan Murano | Platinum, S, SL, SV | 4 Cyl 2.5L, 6 Cyl 3.5L | QR25DER, VQ35DE
View related parts
Nissan Murano Cable Assembly-Hood Lock
Part Number: 65621-CA000
$78.71 MSRP: $121.27
You Save: $42.56 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Lock Control
- Replaced by: 65621-CA00A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2007 Nissan Murano | S, SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano CABLE ASSY-HOOD LOCK CONTROL
Part Number: 65621-7BA0A
$63.78 MSRP: $98.27
You Save: $34.49 (36%)
ADD TO CART
Product Specifications
- Other Name: Release Cable
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2025 Nissan Murano | Platinum, SL, SV | 4 Cyl 2.0 L GAS

Nissan Murano Hood Cable

Nissan Murano Hood Cable enabling drivers to pop the hood quickly for maintenance, the Nissan Murano Hood Cable is an important component. The Hood Cable runs from the release handle on the cabin to a junction underneath the sheet metal. Once the lever is pulled, the main latch is tugged by the Hood Cable. This frees the catch so the hood can be lifted. Many Nissan model years feature a duplex setup, with a long cable that runs from the interior lever to a little splitter that has secondary lines that go off to the left and right latches, creating some tension that keeps both locks moving together. The earlier versions were fitted with one straight Hood Cable that spoke directly to a central latch, but as the Murano grew wider, the twin-branch version offered smoother, lighter pulls. The outer sheath of the wire may get cracked or the wire may get stretched due to moisture, heat, and repeated bending. This may cause the hood to get stuck shut. Timely inspection will save you from this aggravating situation. Because every Nissan driver relies on quick access to their engine, the replacement of a faulty Murano Hood Cable restores confidence and normal service in seconds.

If you need any OEM Nissan Murano Hood Cable, feel free to choose them out of our huge selection of genuine Nissan Murano Hood Cable. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Murano Hood Cable Parts Questions & Experts Answers

Cable Assembly-Hood Lock
65621-1AA0A
Q: How to remove and install the hood latch and Hood Cable on Nissan Murano?
A:
To remove the latch, first, take off the radiator Grille. Scribe a line around the latch for alignment during installation, then remove the latch retaining bolts and the latch itself. Flip the hood latch assembly over and disengage the hood release cable. For the cable, unbolt the hood release latch and disconnect the cable from it, then remove the left inner fender well liner. Detach the cable from the clips securing it along its length and disconnect it from the release handle. Pull the cable grommet into the passenger compartment and then pull the cable through the hole. For installation, reverse the removal steps, ensuring to push on the grommet from the passenger compartment to seat it snugly in the firewall. Adjust the latch so the hood engages securely when closed and the hood bumpers are slightly compressed.