How to remove and install the hood latch and Hood Cable on Nissan Murano?

To remove the latch, first, take off the radiator grille. Scribe a line around the latch for alignment during installation, then remove the latch retaining bolts and the latch itself. Flip the hood latch assembly over and disengage the hood release cable. For the cable, unbolt the hood release latch and disconnect the cable from it, then remove the left inner fender well liner. Detach the cable from the clips securing it along its length and disconnect it from the release handle. Pull the cable grommet into the passenger compartment and then pull the cable through the hole. For installation, reverse the removal steps, ensuring to push on the grommet from the passenger compartment to seat it snugly in the firewall. Adjust the latch so the hood engages securely when closed and the hood bumpers are slightly compressed.

Genuine Nissan Murano Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Hood Latches found

View related parts
Nissan Murano Hood Lock Male
Part Number: 65601-3JA1A
$14.16 MSRP: $21.29
You Save: $7.13 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Male Assy-Hood Lock; Latch, Lock
- Replaces: 65601-3JA0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2015-2024 Nissan Murano | Midnight Edition, Platinum, S, SL, SV | 4 Cyl 2.5L, 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | QR25DER, VQ35DE
View related parts
Nissan Murano Lock Assembly-Hood
Part Number: 65601-1AA0A
$83.57 MSRP: $128.76
You Save: $45.19 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch, Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2008-2014 Nissan Murano | LE, LE/ROOF, S, SL, SL/ROOF, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Bell Crank-Hood Lock
Part Number: 65603-9UA0B
$32.23 MSRP: $48.47
You Save: $16.24 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Safety Catch
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2017-2024 Nissan Murano | Midnight Edition, Platinum, S, SL, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Crank-Bell, Hood Lock
Part Number: 65603-9UA0A
$6.82 MSRP: $10.25
You Save: $3.43 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bell Crank-Hood Lock; Bellcrank, Safety Catch
- Replaced by: 65603-3JA5A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2018 Nissan Murano | Platinum, S, SL, SV | 4 Cyl 2.5L, 6 Cyl 3.5L | QR25DER, VQ35DE
View related parts
Nissan Murano Hood Lock Male Assembly
Part Number: 65601-CA000
$69.03 MSRP: $106.36
You Save: $37.33 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Male Assy-Hood Lock
- Replaced by: 65601-CA00A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2007 Nissan Murano | S, SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Hood Lock Male Assembly
Part Number: 65601-7BA0A
$89.95 MSRP: $128.33
You Save: $38.38 (30%)
ADD TO CART
Product Specifications
- Other Name: MALE ASSY-HOOD LOCK; Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2025 Nissan Murano | Platinum, SL, SV | 4 Cyl 2.0 L GAS

Nissan Murano Hood Latch

The Nissan Murano Hood Latch secures the car's hood shut preventing the engine bay parts from opening due to an accident. It also prevents someone from stealing parts from the engine bay. The Hood Latch is located under the front edge of the hood. It is made up of a cable and an interior release handle which is to pull the handle that releases the primary catch. Therefore allowing the hood to lift after moving the secondary safety catch by hand. The Hood Latch's high-grade steel construction with a reinforced plastic housing resists breakage while factory-matched dimensions fit existing mounting holes on Nissan. The Hood Latch helps keep the hood firmly against the hood support and restricts the panel from striking the windshield and blocking forward vision during daily driving and in the event of a front-end impact. The feature also prevents unauthorized entry to the engine, radiator, battery and other valuable parts. Nissan Murano owners can count on a single solution for their Hood Latch that matches OE function, providing reliable retention on every Murano journey and preserving the secure operation they expect from Nissan and the Murano line.

If you need any OEM Nissan Murano Hood Latch, feel free to choose them out of our huge selection of genuine Nissan Murano Hood Latch. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Murano Hood Latch Parts Questions & Experts Answers

Lock Assembly-Hood
65601-1AA0A
Q: How to remove and install the hood latch and Hood Cable on Nissan Murano?
A:
To remove the latch, first, take off the radiator Grille. Scribe a line around the latch for alignment during installation, then remove the latch retaining bolts and the latch itself. Flip the hood latch assembly over and disengage the hood release cable. For the cable, unbolt the hood release latch and disconnect the cable from it, then remove the left inner fender well liner. Detach the cable from the clips securing it along its length and disconnect it from the release handle. Pull the cable grommet into the passenger compartment and then pull the cable through the hole. For installation, reverse the removal steps, ensuring to push on the grommet from the passenger compartment to seat it snugly in the firewall. Adjust the latch so the hood engages securely when closed and the hood bumpers are slightly compressed.